Home
>
Panasonic
>
Communications System
>
Panasonic Digital Business System Section 300 Installation Guide
Panasonic Digital Business System Section 300 Installation Guide
Have a look at the manual Panasonic Digital Business System Section 300 Installation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
FFYKey-System Account Address Address / Feature -(O 01 1 to 15)# ncoming ring delay timer -(O to lS)# Dial pause timer O: Synchronizes to incoming ring cycle 1: Expand to 50 ms 2: Expand to 100 ms 3: Expand to 150 ms 4: Expand to 200 ms 5: Expand to 250 ms 6: Expand to 300 ms 7: Expand to 350 ms 8: Expand to 400 ms 9: Expand to 450 ms IO: Expand to 500 ms I 1: Expand to 550 ms 12: Expand to 600 ms 13: Expand to 650 ms 14: Expand to 700 ms 0: 1.2 seconds 1: 1.2 seconds 2: 2.0 seconds 3: 3.0 seconds 4: 4.0 seconds 5: 5.0 seconds 6: 6.0 seconds 7: 7.0 seconds 8: 8.0 seconds 9: 9.0 seconds 10: 10 seconds 11: 11 seconds 12: 12 seconds 13: 13 seconds 14: 14 seconds P S Y 8 t e m W i d e S e t t i xl Q 8
lTF1 Key - System BS Account Name Cutover Date ccount Address Account Phone (Main List) Address / Feature -(O or 1 to lO)# PBX-FLASH timer -(O to 15)# Call Forward-No Answer timer 0: No FLASH 1: 0.2 second 2: 0.3 second 3: 0.4 second 4: 0.5 second 5: 0.6 second 6: 0.7 second 7: 0.8 second 8: 0.9 second 9: 1 .O second 10: 1.1 seconds 0: Call forward after 4 seconds 1: Call forward after 8 seconds 2: Cd forward affer 12 seconds 3: Call forward after 16 seconds 4: Call forward after 20 seconds 5: Call forward after 24 seconds 6: Call forward after 28 seconds 1 7: Call forward after 32 seconds 8: Call forward after 36 seconds 9: Call forward after 40 seconds 10: Call forward after 44 seconds 11: Call forward after 48 seconds 12: Call forward after 52 seconds 13: Call forward after 56 seconds 14: Call forward after 60 seconds j t s 8 t e m w i d e S e t t i n Q 8 16
i’- ’ FFlKey-Systxm dBS Account Name Account Address Cutover Date Sheet of Account Phone (Main List) Address / Feature -(O or 1 to 8)# Outbound ground detection timer -(O or 1 to 818 Incoming ground detection timer -(O or 1 to 1216 Attendant intercom HOLD-recall timer (UC-B Vs. 2.0) 1: 1 second 2: 2 seconds 3: 3 seconds 4: 4 seconds 5: 5 seconds 6: 6 seconds 7: 7 seconds 0: No detection 1: 1 second 2: 2 seconds 3: 3 seconds #:#seconds 5: 5 seconds 6: 6 seconds 7: 7 seconds 0: No intercom HOLD recall I: 20 seconds 2: 40 seconds 3: 60 seconds 4: 80 seconds 5: 100 seconds 6: 120 seconds 7: 140 seconds 8: 160 seconds 9: 180 seconds 10: 200 seconds 11: 220 seconds S Y 8 t e m W i d e S e t t i n Q 8 1
RF1 Key - System Account Addre Address / Feature -(O or 1 to 12)# Extension intercom HOLD recall timer WC-B Vs. 2.0) -(O or 1 to 12)# Attendant intercom transfer recall timer WC-8 Vs. 2.0) Program Options 0: No intercom HOLD recall 1: 20 seconds 2: 40 seconds 3: 60 seconds 4: 80 seconds 5: 100 seconds 6: 120 seconds 7: 14oseconds 8: 160 seconds 9: 180 seconds 10: 200 seconds 11: 220 seconds 12: 240 seconds 0: No intercom transfer recall 1: 20 seconds 2: 40 seconds 3: 60 seconds 4: 80 seconds 5: 100 seconds 6: 120 seconds 7: 140 seconds 8: 160 seconds 9: 180 seconds 10: 200 seconds 11: 220 seconds 12: 240 seconds Y 8 t e m W i d e S e t t i 11 Q 8 18
RF1 Key - Sgstem D’BS Account Name Account Address Cutover Date Sheet of -- Account Phone (Main List) Address / Feature -(O or 1 to 12)# Extension intercom transfer recall timer (CPC-6 vs. 2.0) CO delayed ringing timer WC-B Vs. 3.0 or higher) Program Options 0: No intercom transfer recall 1: 20 seconds 2: 40 seconds 3: 60 seconds 4: 80 seconds 5: 100 seconds 6: 120 seconds 7: 140 seconds 8: 160 seconds 9: 180 seconds 10: 200 seconds 11: 220 seconds 12: 240 seconds I I 0: CO delay ringing after 4 seconds 1: CO delay ringing after 8 seconds 2: CO delay ringing ufier 12 seconds 3: CO delay ringing after 16 seconds 4: CO delay ringing after 20 seconds 5: CO delay ringing after 24 seconds 6: CO delay ringing after 28 seconds 7: CO delay ringing after 32 seconds 8: CO delay ringing after 36 seconds 9: CO delay ringing after 40 seconds 10: CO delay ringing after 44 seconds 11: CO delay ringing after 48 seconds 12: CO delay ringing after 52 seconds 13: CO delay ringing after 56 seconds 14: CO delay ringing after 60 seconds S Y 8 t e m W i d e S e t t i n !3 8
FFIKey-System DBS Account Name Cutover Date Sheet of Account Address Account Phone (Main List) Address / Feature EXT. delayed ringing timer (WC-6 Vs. 3.0 or higher) Hunt Group no answer (CPC-B Vs. 3.0 or higher) -(HHMMM (WC-B Vs. 4.0 or higher) 0: EXT. delay ringing after 4 seconds 1: EXT. delay ringing after 8 seconds 2: EXT. deby thgbhg crlyer 12 seconds 3: EXT. delay ringing after 16 seconds 4: EXT. delay ringing after 20 seconds 5: EXT. delay ringing after 24 seconds 6: EXT. delay ringing after 28 seconds 7: EXT. delay ringing after 32 seconds 8: EXT. delay ringing after 36 seconds 9: EXT. delay ringing after 40 seconds 10: EXT. delay ringing after 44 seconds 11: EXT. delay ringing after 48 seconds 12: EXT. delay ringing after 52 seconds 13: EXT. delay ringing after 56 seconds 14: EXT. delay ringing after: 60 seconds 0: H. Group no answer after 4 seconds 1: H. Group no answer after 8 seconds 2: If. Grout no mswer offer 12 seconds 3: H. Group no answer after 16 seconds 4: H. Group no answer after 20 seconds 5: H. Group no answer after 24 seconds 6: H. Group no answer after 28 seconds 7: H. Group no answer after 32 seconds 8: H. Group no answer after 36 seconds 9: H. Group no answer after 40 seconds 10: H. Group no answer after 44 seconds 11: H. Group no answer after 48 seconds 12: H. Group no answer after 52 seconds 13: H. Group no answer after 56 seconds 14: H. Group no answer atier 60seconds 15: H. GrouD no answer after 64 seconds HH: Hours (00 to 23) MM: Minutes (00 to 23) P Y 8 t e m W i d e S e t t i n Q 8 c c 2c
FFl Key - System DBS Account Name Account Address Cutover Date Sheet of Account Phone (Main List) Address / Feature -(4 digts)# Ako used with DISA Remote maintenance I -(4 diglts)# See FF2-ill. 191, 20# -(4 d@tsM See FFZ-11X, 19#, 20# -(4 digtk)# -(O Of 1)Y (CPC-B Vs. 3.0 or hlghed DID reset -(O to 111 (CPC-B Vs. 4.0 01 hlgher) DID/l1 reset (6) -(O of l)# (WC-B Vs. 3.0 of higher) Confirmation of DID reset -(O or I)# (WC-B Vs. 4.0 or higher) -(O to 9999)#-(10 to 69 or 100 to 699I1 DID Number Set -1X-1X-(0 to W System size (CPC-B Vs. 4.0 OT higherl 1111: Default 9999: Dekutt l-l 0: No (do not reset DID numbers) 10 to 69 loo to 699 # 0: D6S 40 1: DBS 72 2: DBS 96 3: DBS 40 + DES 40 (Tl must be in slave cabinet.) 4: Df3S 72 + DBS 40 fll not supported) 5: DE3S 72 + DBS 72 01 must be In slave cabinet.) 6: DES 96 + DES 40 7: DEE 96 + DBS 72 S Y s t e m W i d e S e t t i n Q 8 2
EFIKey-system Account Address Sheet of Account Phone (Main List) Address / Feature -l#-2#-(1 to 3)Y Synchronization setting for the first sync some - l #-3#-(0 to 3)# Synchronization setting for the second sync sauce -l#-#-Cl to 3hv Synchronization setting for the third sync some -2#-l#-(0 to 2sM Neiwuk Resync timer -2#-2#-(IJ to 12)# Diiconnect timer -m-3#-(0 to 15)# Guard timer -2#-4#-(0 to lS)# Release acknowiedge timer (RLS ACK Timer) -2#-!i#-(0 to 8)Y Duipdse delaq timer -2#45#-(0 to 1511 tink timeout timer OJVink Timeout) ~2#-7#-(oto 15)# ncoming detection timer -2#-W-(0 to 8)x Ynswer supervision timer (Answer Super4 .2#-9#-(0 to 1 5)# mmediate Glue timer (Imm-Glare Timer) *2#- 1 or-
FFl Key - Sgstem r \- Account Address Account Phone (Main List) Address / Feature Program options -3X-(1 to 8)X-(1 to 8)#-(0 to 3OM Digital pad settings (Digital Pad Set) -8#-4W 1 1 CklJitTvr>es K-TEL SLT DATA PmbgCOTrk Tl Master Tl slave OPllONl” OlllON2” DPVW CoNF~C)# Tone 1 &lFRl)# Tone2&lFM)# #CrcuitType3&912cxe rae4vedtifuiureuse. YJse~~la7d2to CX&lUliCjUePADlevels tocicuikthutrequke speddvdmew No. 1 2 3 4 5 6 7 8 9 lo 11 ‘12 Figure 1 shows the numbers used to identify each circuit type. Figure 2 shows the defautt values for the most common Tl connections. figure 3 lists the adjustments provided by each pad number. I F/awe 2: Default wd vaiues I From To Sefflng Value Tl%l K-TEL 16 -2 dB Tl f2 .K-TEL 16 -2 dB Tl Xl SLT 16 -2 dB Tl f2 SLT 16 -2 dB K-TEL Tl Rl 16 -2 dB K-TEL Tl 62 16 -2 dB SLT Tl 81 16 -2 dB SLT Tl #2 16 -2 dB I F&we 3: Ptd Nos. I Pad No. 1 Level ] i +28 dB 1 29 30 -28 dB -30 dB P S Y .s t e m W i d e 23
IF1 Key - System Account Address Account Phone (Main List) Address / Feature -4#-l#-l#-(0 to I)# (Master cablnet) -5#-l#-l#-(0 to l)# Glave cabhot) Trunk class -4#-l#-2X-(0 to 24)# (Master cabhot) -M-l#-2#-(0 to 24)# Glave cablnetl Number of channels used -4#-l#-3#-(0 to l)# @laster cabinet) -s#-1x-3#-(0 to 1)# (Slave cabinet) Frame format -4#-1#-4#-(0 to l)# (Master cabinet) -5#-1#-4#-(0 to l)li Wave cablnet) Clear chawwl -4#-l#-sr-co to l# -St-l#-5#-(0 to 1M (Master cabinet) (slave cabhot) Failure mode -4+1#-6+(0 to l)# (Master cabinet) -5X-it-M-(0 to I)# Gtave cabinet) Remote loopback (R-Loooback) -4+1#-7#-(0 to l)# -5#-l#-71(0 to I)# Yellow akxm send -4#-2#-l#-(0 to 15)# -5#-2#-W-(0 to iS)# (Master cabhot) (Slave cabinet) (Master cablnet) tslave CabInetI Red alarm detection (Red Aim Det) -4#-2#-2#-(0 to lS)# Nader cablnen -SI-2#-21-(0 to isjr kitave cabtnell Yellow detection (YeI Aim Det) -4#-2#-3#-(0 to 15)# (Master cablneb -St-263#-(0 to lS)# Mave cabinet) Yellow alam recovq (YeI Aim Ret) -4#-2#-4#-(0 to 1511 (Master cabhot) -s#-2##-(0 to 1511 fslave cabinen 3her darms detection (Other Alm Det) -4#-2#-5#-(0 to lS)# (Mastor CabInen -5#-2#-5#-(0 to 1511 Grave cabtnen Other alarms recovery (Other Aim Ret) -4#-3#-ll-(0 to 9ooo)# (Master cabinet) -St-Jli-l#-(0 to 9ooo)# &v* CaMnet) - Frame loss counter (Frame Count) -4#-31-2#-(0 to 9ooo)# (Master cabinet) -4+3#-2#-(0 to 9alo)# (Skve cabinet) Slip counter (Slip Count) -&l-3&3+(0 to I)# (Master cabinet) -4+3#-31140 to 1H Slave cabirmt) Red alarm counter (Red Aim Count) 0: Analog only 1: Tl and analog trunks 0 to 24 co, 0: SF (Super Frame) 1: ESF @Mended Super Frame) 0: AM (Alternate Mark lnverslon) 1: B8ZS (Binary 8-zeros suppression) 0: Mode 1 1: Mode 2 0: No (No system response to loop&ac&.) 1: Yes (System responds to loopback.) aoff 1: on 0 to 5 (2) 0 to 15 n Y 8 t e m W i d e S e t t i n SJ 8 c j 24