Home
>
Panasonic
>
Communications System
>
Panasonic Digital Business System Section 300 Installation Guide
Panasonic Digital Business System Section 300 Installation Guide
Have a look at the manual Panasonic Digital Business System Section 300 Installation Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Installation, Section 300 Cabinet Installation Issue 2 August 16,1993 Installation for the DBS 40 1. Place one battery in the top tray of the battery compartment, the other battery in the bottom tray. Rnff~ru Inmhn. nRS 4n I 2. Connect the positive cable (red) to the + terminal of the top battery. 3. Connect the connecting cable (white) to the - terminal of the top battery. 4. Connect the negative cable (blue) to the - terminal of the bottom battery. 5. Connect the connecting cable (white) from the top battery to the + terminal on the bottom battery. 3-10
Installation, Section 300 Issue 2 Cabinet installation August 16; 1993 Installation for the DBS 72 and 96 1. Slide the battery compartment out and place the four batteries inside the tray. Figure 3-9. Baaety tray, OBS 72 and 96 Remove Screws and Slide Battery Tray Out 2. 3. -4. Connect the positiye cable (red) to the + terminal on the frost battery. Connect the negative cable (blue) to the - terminal on the last battery. Connect the remaining positive and negative terminals with the white connection cables, as shown in Figure 3-10. 3-11
Installation, Section 300 Issue 2 Cabinet Installation August 16,1993 Figure 3-I&Battery pack connection, DBS 72 and 96 I White Connection Cables 3-l 2
Installation, Section 300 Cabinet Installation Issue 2 August 16, 1993 Kev Phone Wall Mountinq DBS key phones can be modified for wall mounting by reversing the wall- mount adaptor on the bottom of the phone. The wall-mount adaptor includes a small hole for attaching the phone to a screw inserted in the wall. 1. Place the bottom edge of the telephone on a desk or other hard surface. 2. Press the wall-mount adaptor down until it detaches from the phone (Figure Figure 3-11. Wall-r 3-l 1). unt adaptor removal Wall-Mount Adaptor 3-l 3
Installation, Section 300 Issue 2 Cabinet Installation August 16,1993 3. Turn the wall-mount adaptor around and re-attach it to the phone. Figure 3-12. Wall-mo Wall-Mount Adaptor f 3-l 4
Installation, Section 300 Issue 2 Cabinet Installation August 16,1993 4. Remove the handset guide with a small screwdriver, turn it over. and &insert _ it into the phone. Fimre 3-13.Handset puide insertion for wall-nwuntinn. kev ohone Handset Guide I I I I I 1 I 1 I 1 I I I I I 1 r 1 L J r 1 Handset I t L L I L r r I [ 7 I I 1 I I J I 1 I 3-15
Installation, Section 300 Issue 2 Cabinet installation August 16,1993 DSLT Wall Mountinq Digital Single-Line Telephones (DSLTs) can be modified for wall mounting by removing the desk stand and mounting it on the bottom of the phone. The back of the DSLT and the desk stand include slots for attaching the phone to a screw inserted in the wall. 1. Press the stand releases in toward the middle of the phone to release the desk stand (Figure 3-14). Figur ,ILDesk stand removal for DSLT wail munBn~ 3-16
Installation, Section 300 Issue 2 Cabinet Installation August-16, 1993 2. Attach the desk stand to the bottom of the phone by aligning the tabs‘and tab guides and sliding it into place (Figure 3-15). _- Figure 45.Desk s&and attachment for DSLT wall mounting 3-l 7
Installation, Section 300 Issue 2 Cabinet installation August l&l993 3. Remove the handset guide with a small screwdriver, turn it over, and reinsert it into the phone. 3-16. Handset guide insertion for wall-mounting, DSLT Handset Guide I I I I I 1 c 1 I I I 1 1 1 I ~~ 1 1 1 I I I 1 1 1 I I 1 1 Handset 3-l 8
Installation, Section 300 Issue 2 Cabinet Installation August 16,1993 Svst& Initialization 1. Confirm that the DBS power switch is OFF. 2. Plug the power cord into a dedicated 120V 15 amp AC wall outlet. Note: A surge protector should be installed on the power cord. 3. Set SW1 on the CPC card to CLEAR. momnrw rlonr cwitrh 4. Turn the power switch on. As the system loads, the bottom LED lamp on the CPC card will flash. 5. Once the bottom LED lamp on the CPC card stops flashing, set SW 1 on the CPC to HOLD. 3-l 9