NEC Neax2000 Ivs Feature Programming Manual
Have a look at the manual NEC Neax2000 Ivs Feature Programming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 80
ND-45670 (E) CHAPTER 2
Page 63
Revision 2.0
ATTENDANT CONSOLE (SN610): DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
(1300 Series Enhancement)
HARDARE REQUIRED
PN -4DIT card (DID Trunk)
PN-2ODT card (Tie Line Trunk)
Character Code Table
Character DATA Character DATA Character DATA Character DATA Character DATA Character DATA Character DATA
(space)20 * 2A 4 34 > 3E H 48 R 52´5C
! 21 + 2B 5 35 ? 3F I 49 S 53 ] 5D
“ 22 , 2C 6 36 @ 40 J 4A T 54 ^ 5E
# 23 - 2D 7 37 A 41 K 4B U 55 - 5F
$24 . 2E838B42L4C V56
% 25...](http://img.usermanuals.tech/thumb/54/84254/w64_nec-neax2000-ivs-feature-programming-manual_d-79.png "Page 80
ND-45670 (E) CHAPTER 2
Page 63
Revision 2.0
ATTENDANT CONSOLE (SN610): DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
(1300 Series Enhancement)
HARDARE REQUIRED
PN -4DIT card (DID Trunk)
PN-2ODT card (Tie Line Trunk)
Character Code Table
Character DATA Character DATA Character DATA Character DATA Character DATA Character DATA Character DATA
(space)20 * 2A 4 34 > 3E H 48 R 52´5C
! 21 + 2B 5 35 ? 3F I 49 S 53 ] 5D
“ 22 , 2C 6 36 @ 40 J 4A T 54 ^ 5E
# 23 - 2D 7 37 A 41 K 4B U 55 - 5F
$24 . 2E838B42L4C V56
% 25...")
CHAPTER 2 ND-45670 (E) Pag e 6 4 Revision 2.0 ATTENDANT CONSOLE (SN610): INCOMING CALL IDENTIFICATION PROGRAMMING Refer to Attendant Called/Calling Number, Attendant Call Selection, Attendant Source Key, Attendant Listed Di- rected Number, and Common Route Indial.
ND-45670 (E) CHAPTER 2 Page 65 Revision 2.0 ATTENDANT CONSOLE (SN610): INDIVIDUAL TRUNK ACCESS PROGRAMMING DESCRIPTION DATA Assign the access code for Direct Trunk Selection.• Y = 0-3 (Numbering Plan Group 0-3) (1) X-XXX (Access Code) (2) 081 Assign the Trunk identification code to each trunk. The Trunk ID code is to be dialed after the access code, and displayed on the SN610 ATTCON. • YY = 19 (1) Trunk No. (000-255) assigned by CM10 (D000-D255) (2) XXXX : Trunk ID code Note *a: Set any desired number (4 digit). Note:By loading Resident System Program, Trunk Identification Codes are assigned as follows. 1XXX *a: Trunk Number (000-255) END CM30 CM20 START *a *a
CHAPTER 2 ND-45670 (E) Pag e 6 6 Revision 2.0 ATTENDANT CONSOLE (SN610): MULTIPLE CONSOLE OPERATION PROGRAMMING Refer to ATTENDANT CONSOLE (SN610 ATTCON).
ND-45670 (E) CHAPTER 2 Page 67 Revision 2.0 ATTENDANT CONSOLE (SN610): MULTI-FUNCTION KEY PROGRAMMING DESCRIPTION DATA Provide each SN610 ATTCON Multi- Function key capability.• YY = 17 (1) X: ATTCON No. (0-7) assigned by CM10 (2) 1 : Ineffective/Effective Assign the required Multi-Function keys the each SN610 ATTCON. Note 1:The following data is assigned as initial data or resident data. Note 2:When setting or canceling a group of stations in DND/RC, ATTCON Status No. 00 should be used. Note 3:For the SN716 DESKCON Multi- Function key, do not assign the MODE key (F6110).• YY=00 (1) EXX X + + Multi-Function key No. 01-06: SN610 01-04: SN716 *a: ATTCON Status No. (00-15) 00 : Idle State 01 : When Answering or Orig- inating 02 : When the called station is busy 03 : When the called station is DND 04 : When accessing Hotel/ Motel feature 05-15 : Not Used *b: ATTCON No. (0-7) (2) F6XXX *a: Setting Data (000-255) 105 (SC) 106 (SHF) 112 (SPB) 113 (LPB) 203 (TALK) 107 (BV) 108 (DDOV) 100 (RC) 101 (MN) 102 (DD) 109 (WU) 104 (RESET) CM60 CM90 START END Key # ATTCON Status #01 02 03 04 05 06 00 01 02 03 04F6110 MODE F6112 (SPB) F6100 (RC)F6111 PROG F6101 (MW) F6113 (LPB)F6106 (SHF) F6102 (DD)F6109 (WU)F6105 (SC)F6203 (TALK) F6104 RESETF6107 (BV) F6108 (DDOV) , *b *a *a
CHAPTER 2 ND-45670 (E) Pag e 6 8 Revision 2.0 ATTENDANT CONSOLE (SN610): PUSHBUTTON CALLING-ATTENDANT PROGRAMMING DESCRIPTION DATA Assign the type of signaling (DTMF) to Outgoing and Bothway Trunk Routes.• YY = 01 (1) Trunk Route No. (00–63) (2) 7CM35 END START
ND-45670 (E) CHAPTER 2 Page 69 Revision 2.0 ATTENDANT CONSOLE (SN610): SERIAL CALL PROGRAMMING DESCRIPTION DATA Assign the SERIAL CALL SET and SERIAL CALL Keys on the SN610 ATTCON.• YY = 00 (1) ATTCON No. + + Key No. (2) F6062: Serial Call Termination F6105: Serial Call SetCM90 START END ,
CHAPTER 2 ND-45670 (E) Pag e 7 0 Revision 2.0 ATTENDANT CONSOLE (SN610): TRUNK GROUP BUSY DISPLAY PROGRAMMING HARDWARE REQUIRED To provide the Trunk Group Busy Lamps on Attendant Console: SN610 ATTCON and PN-2DLCC card To provide the Trunk Group Busy Lamps externally: PN-DK00 card and lamp indicator provided by the customer. DESCRIPTION DATA Assign the Trunk Group No. to each trunk. Several trunks may be assigned to one Trunk Group Number.• YY = 09 (1) 000-255 (Trunk No.) (2) 01-62 (Trunk Group No.) For providing the Trunk Group Busy Lamps on SN610 ATTCON, assign the Trunk Group No. to required key on SN610 ATTCON. Note 1:Max.6 keys per SN610 ATTCON can be assigned. (Any six Trunk Group No. out of Trunk Group No. 01-62 can be assigned.) Note 2:Keys No. 1-6 should not be assigned to provide a Trunk Group Busy Lamp• YY = 00 (1) ATTCON No. + + Key No. (2) F12XX *a: 01-62 (Trunk Group No. assigned by CM30 YY = 09) For providing external Trunk Group Busy Lamps, assign the Trunk Group No. to the required circuit number on the PN-DK00 card.(1) XX X *a: 00-31 (Card No. of PN-DK00 as- signed by CM10, E800-E831) *b: 0-3 (Circuit No.) (2) 11XX *a: 01-62 (Trunk Group No. assigned by CM30 YY = 09) CM30 START CM90 CM44 END , *a *b *a *a
ND-45670 (E) CHAPTER 2 Page 71 Revision 2.0 ATTENDANT CONSOLE (SN610): UNSUPERVISED TRUNK-TO-TRUNK TRANSFER BY ATTENDANT PROGRAMMING Note:The trunk associated with at least one side of the call must be programmed for answer and/or release signal(s) to ensure the trunks do not lock up. Refer to TRUNK-TO-TRUNK CONNECTION for data to be assigned to each trunk. DESCRIPTION DATA Provide the system with this feature. (1) 206 (2) 1 : AvailableCM08 START END
CHAPTER 2 ND-45670 (E) Page 72 Addendum-002 Revision 2.2 JANUARY, 1999 ATTENDANT CONSOLE (SN716 DESKCON) PROGRAMMING DESCRIPTION DATA Assign the card number of the interface cir- cuit for the SN716 DESKCON to its associ- ated LEN. (1) 0000-0511 : LEN No. (2) E000-E007 : ATTCON No. Set the terminating system for the incoming calls to SN716 DESKCON.• YY=02 (Day mode), YY=03 (Night mode) (1) Trunk No. (000-255) (2) 14: Termination to SN716 DESKCON Assign the required Attendant Call Selection keys and ATTCON Function keys to each SN716 DESKCON. If no data is set, the default setting is as fol- lows (Refer to MULTI-FUNCTION KEY for assignment of Multi-Function Keys): • YY=00 (1) ATTCON No. EXX X+ + Key No. (2) F6000-F6067: Type of Calls to be as- signed F6100-F6245: Functions to be assigned CM10 CM30 START A CM90 ATTCON No. (0-7) ATTCON Status No. (00-15) 00: Idle State [Same as Key Assign (1)] 01: When answering or originating 02: When the called station is busy 03: When the called station is in Do Not Disturb mode 04: When accessing Hotel/Motel feature 05: 15: ~Not Used ,
ND-45670 (E) CHAPTER 2 Page 73 Revision 2.0 ATTENDANT CONSOLE (SN716 DESKCON) DESCRIPTION DATA Key No.DataDescription 13 F6000 C.O. Incoming 0 (LDN) 14 F6040 Tie Line Incoming 0 (TIE0) 15 F6064 Call Fowarding-Busy Line Incoming Indication (BUSY) 16 F6060 Operator Call (ATND) 17 F6063 Call Forwarding-No Answer Incoming Indication (NANS) 18 F6061 Recall (Recall) 19 F6200 Source (SRC) 20 F6201 Destination (DEST) 22 F6203 Talk (Talk) 23 F6204 Hold (Hold) 24 F6202 Cancel (Cancel) 25 Answer (Answer) 26 Release (Release) Note:When the SN716 is used to set H/M features, the “Reset” key should be assigned to one of the feature keys (i.e Key 21) in the Idle mode. A B Key # ATTCON Status #01 02 03 04 05 06 00 01 02 03 04F6110 MODE F6112 (SPB) F6100 (RC)F6111 PROG F6101 (MW) F6113 (LPB)F6106 (SHF) F6102 (DD)F6109 (WU)F6105 (SC)F6203 (TALK) F6104 RESETF6107 (BV) F6108 (DDOV)