NEC Neax2000 Ivs Feature Programming Manual

							CHAPTER 2 ND-45670 (E)
Pag e 4 22
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
DESCRIPTION DATA
To delete the designated digit of an area code:  • YYY = 500-755
(1) 153 (Designation of digit to be deleted) 
(2) 00: No digits deleted 
01: First digit deleted 
10: First 10 digits deleted 
CCC: No digits deleted
Assign the digits to be added when adding 
digits to those sent to a distant office. • YYY = 500-755
(1) 100 (Designation of digit Addition Pat-
tern No.)
(2) 00-49 (Digit Addition Pattern No. 00-49)
CCC: No digits added 
• YYY = 900-949 (Digit Addition Pattern 
No. 00-49) 
(1) 0 
(2) X-X...X [Digits to be added (Max. 32 
digits)] 
X = 0-9, A (*), B (#), C (Fixed Pause) 
Assign the digit to be added to the required 
trunk routes when adding digits to those re-
ceived from a distant office. • YY = 17
(1) 00-63 (Trunk Route No.)
(2) 00: Add 0
01: Add 1
02: Add 2
03: Add 3
04: Add 4
05: Add 5
06: Add 6
07: Add 7
08: Add 8
09: Add 9
10: Add 2 digits per CM50
Assign the data for digit deletion to re-
quired trunk routes for deleting the first
one or two digits received from a distant
office.• YY = 17 
(1) 00-63 (Trunk Route No.) 
(2) 11: Delete first digit 
12: Delete first two digits
If two digit addition is required, assign the
digits to be added (See CM35 YY=17,
2nd data = 10). • YY = 00
(1) 0 
(2) XX (Digits to be added) 
A
CM35
CM8A
END
CM50|| 
						

							ND-45670 (E) CHAPTER 2
Page 423
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
Example 1:
 When the PBX is an end office in a network employing a Closed Numbering System. 
Programming for Example 1:
COMMAND CODE 1ST DATA 2ND DATA REMARKS
20 Y = 0
20 Y = 0
8A YYY = A007
8
0A29
A29
5Assignment of Access Code (7, 8) to
LCR Group 3.
Assignment of Area Code Development
Pattern No. 5. 
8A YYY = 405 
8A YYY = 405 
8A YYY = 405 
8A YYY = 405 72
73
8
715000
000
000
804Assignment of Route Pattern No. 00 to
Area Code (72, 73, & 74).
Assignment of the 4-digit Intra-Office
Station to the Area Code 715. 
8A YYY = 000 1 00000 Assignment of the order of LCR selec-
tion (1st) for Route Pattern No. assigned
by YYY = 405. 
73XX
OFFICE
B
OFFICE
C OFFICE
A 72XX
714X
72XX/73XX/
8XXX
8XXX
Trunk Route to Office A:                  
Area Code of Office A:                     
Area Code of Office B:                     
Area Code of Office C:                       
Area Code of Intra-Office Station:   
Numbering Plan Group:                      
PBX
715X
00
72
73
8
715
0 
						

							CHAPTER 2 ND-45670 (E)
Pag e 4 24
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
Example 2:
 When the PBX is a Tandem Office in the network.
Programming for Example 2:
COMMAND CODE 1ST DATA 2ND DATA REMARKS
20 Y= 0 7 A29 Assignment of Access Code 7 of LCR
Group 3. 
8A YYY= A00 3 5 Assignment  of  Area Code Development
Pattern No. 5. 
8A YYY= 405 740 001 Assignment of Route Pattern No. 01 to
Area Code 740 of Office B. 
8A YYY= 405 735 804 Assignment  of  the  4-digit  Intra-Office
Station to the Area Code 735. 
8A YYY= 000 1 00001 Assignment of the order of LCR selec-
tion (1st) for Route Pattern No. assigned
by YYY = 405. 
OFFICE
BOFFICE
A
Trunk Route to Office B:        
Area Code of Office B:           
Area Code of Intra-Office Station:  
Numbering Plan Group:             
PBX
DIAL NO.
7400/7350
TRUNK ROUTE 017350
7350
7400 7400/7350
7400
01
740
735
0 
						

							ND-45670 (E) CHAPTER 2
Page 425
Revision 2.0
VARIABLE TIMING PARAMETERS
PROGRAMMING
DESCRIPTION DATA
Specify the required Timing Parameters ac-
cording to the user’s requirements. If no data 
is set (Displayed “NONE”) the Standard tim-
ing which is initially set is applied.•Y = 0-2
(1) XX  
(2) XX 
START
CM41
END
See the Command Manual. 
						

							CHAPTER 2 ND-45670 (E)
Page 425-1 Addendum-001
Revision 2.1 JULY, 1998
VOICE GUIDE (1900 Series Enhancement)
PROGRAMMING
To provide the message that is sent when a station goes off hook while Message Waiting/Call Forwarding-All Calls/
No No Disturb service is set to the station:
DESCRIPTION DATA
Specify the Multi-Connection of the Dig-
ital Announcement Trunk (PN-2DATA)
on Announcement Service. (1) 124 
(2) 0/1 : Available/Not Available (Sin-
gle Connection)
Assign a Digital Announcement Trunk
Circuit No. to the required LEN.
Note:
   The Digital Announcement Trunk 
Circuit No. must be assigned to the 
first LEN (Level 0) and/or the third 
LEN (Level 2) of each LT slot.(1) LEN (0000-0511) 
(2) EB000-EB127: Digital Announcement 
Trunk Circuit No. 
For PIM0/1: EB000-EB031 
For PIM2/3: EB032-EB063 
For PIM4/5: EB064-EB095 
For PIM6/7: EB096-EB127 
Assign the Class of Service for An-
nouncement Service to the required sta-
tions. •  CM12 YY = 02
(1)  X-XXXX:  Primary Extension No.
(2) XX
 XX 
*a: Service Restriction Class (A):  00-
15
•  CM15 YY = 34 (Group 0) 
•  CM15 YY = 35 (Group 1) 
•  CM15 YY = 36 (Group 2) 
•  CM15 YY = 37 (Group 3) 
•  CM15 YY = 38 (Group 4) 
•  CM15 YY = 39 [Recording for An-
nouncement Service (Group 0-4)] 
(1)  00-15 : Service Restriction Class (A) 
assigned by CM12 YY = 02 
(2) 1 : Allowed 
Assign access codes for Announcement
Service. •  Y = 0-3 (Numbering Plan Group 0-3) 
(1) X-XXX:  Access Code 
(2)  A03:  Recording message (Group 0-4) 
A04:  Replaying message (Group 0)
A05:  Replaying message (Group 1)
A06:  Replaying message (Group 2) 
A07:  Replaying message (Group 3)
A08:  Replaying message (Group 4)
A09:  Deleting message (Group 0-4) 
CM08
CM10 START
A
CM20
CM12
CM15*a 
						

							ND-45670 (E) CHAPTER 2
Addendum-001 Page 425-2
JULY, 1998 Revision 2.1
VOICE GUIDE (1900 Series Enhancement)
Note 1:While both Message Waiting and Call Forwarding-All Calls/Do Not Disturb Service are set to the station,
the message assigned by CM49 YY=13 1st data 00 is sent.
Note 2:While Message Reminder (from STA/ATT) Service is set to the station, the message assigned by CM49
YY=13 1st data 00 is sent.
Note 3:While Split Call Forwarding-All Calls Service is set to the station, the message assigned by CM49 YY=13
1st data 03 is sent.
DESCRIPTION DATA
Specify the dial tone, which is sent when a sta-
tion goes off hook while the service is set for
the station, as Special Dial Tone.•Y=2
(1) 12 (Dial Tone on Setting Message Wait-
ing)
13 (Dial Tone on Setting Call Forward-
ing-All Calls)
14 (Dial Tone on Setting Do Not Dis-
turb)
(2) 0: Special Dial Tone
Validate the data set by CM48 Y=2 first data
12, 13, 14.• YYY=116
(1) 00-15: Service Restriction Class A
(2) 1 : Valid
Assign the function for each Digital An-
nouncement Trunk Circuit.• YY=00
(1) 000-127: Digital Announcement Trunk 
Circuit No. assigned by CM10 
(EB000-EB127)
(2) 17XX
: Voice Guide
Message No. used for this feature 
(00-63)
Assign the Message sent when the station
goes off hook.• YY=13
(1) 00 (Message sent when Message Waiting 
is set)
03 (Message sent when Call Forwarding-
All Calls/Do Not Disturb is set)
(2) Message No. (00-63)
END
CM49
CM48
CM15
A 
						

							CHAPTER 2 ND-45670 (E)
Page 425-3 Addendum-001
Revision 2.1 JULY, 1998
VOICE GUIDE (1900 Series Enhancement)
To provide the Message which is sent when the service feature setting to the station is completed or cancelled:
HARDWARE REQUIRED
Digital Announcement Trunk (PN-2DATA)
DESCRIPTION DATA
Assign the function for each Digital An-
nouncement Trunk Circuit.• YY=00
(1) 000-127: Digital Announcement Trunk 
Circuit No. assigned by CM10 
(EB000-EB127)
(2) 17XX
: Voice Guide
Message No. used for this feature 
(00-63)
Assign the Message No. when service setting
is completed or cancelled to station.• YY=13
(1) 01 (Message sent when service is set)
02 (Message sent when service is can-
celled)
(2) Message No. (00-63)
Message Replay Timer for Announcement
Service.•Y=0
(1) 53
(2) 01-99 (4 sec.-396 sec.)
If no data is set, the default setting is 60-64
sec.
START
END
CM49
CM41 
						

							ND-45670 (E) CHAPTER 2
Addendum-001 Page 425-4
JULY, 1998 Revision 2.1
This page is for your notes. 
						

							CHAPTER 2 ND-45670 (E)
Pag e 4 26
Revision 2.0
VOICE MAIL INTEGRATION (IN BAND)
PROGRAMMING 
In addition to the programming of CALL FORWARDING-ALL CALLS/BUSY LINE/NO ANSWER, do the fol-
lowing programming.
DESCRIPTION DATA
Specify whether Ringing Transfer to an At-
tendant via VMS is available.(1) 063
(2) 0/1 : Available/Not Available
Specify the sending of the Mail Box No. to the 
VMS when the VMS is recalled after transfer-
ring a call to an unanswered station.(1) 333
(2) 0: To be sent
1 : Not to be sent
Provide Message Waiting service for a station 
with MW lamp. • YY = 03
(1) X-XXXX: (Station No.)
(2) 0: To be provided
Provide VMS service for a station port inter-
faced with the VMS (VMS station).• YY = 10
(1) X-XXXX: (Station No.)
(2) 0: To be provided
Provide Message Waiting service for a VMS 
station port.• YY = 13
(1) X-XXXX: (Station No.)
(2) 0: To be provided
Assign the Class of Service for Message Wait-
ing to a station with a MW lamp and a VMS 
station port.• CM12 YY = 02
(1) X-XXXX: (Station No.)
(2) XX
XX
 *a
*a: Service Restriction Class (A)
(00-15 )
• CM15
YY = 24 (Station with MW lamp)
YY = 40 (VMS Station)
(1) XX: Service Restriction Class (A) as-
signed by CM12 YY = 02 
(2) 1 : Allowed
Assign the access code for MW lamp set/can-
cel from a VMS station port.• YY = 0-3 (Numbering Plan Group 0-3)
(1) X-XXX: Access code
(2) 040: Set
041: Cancel
Assign the access code to retrieve a message 
from the VMS and search Message Reminder/
Message Waiting.• YY = 0-3 (Numbering Plan Group 0-3)
(1) X-XXX: Access code
(2) A46: Search
A47: Retrieve
START
CM08
CM13
CM12
CM15
A 
						

							ND-45670 (E) CHAPTER 2
Addendum-002 Page 427
JANUARY, 1999 Revision 2.2
VOICE MAIL INTEGRATION (IN BAND)
DESCRIPTION DATA
Assign the access code to be sent out to a 
VMS after/before a Mail Box Number, if re-
quired.
Note 1:“C” or “D” should not be assigned
as the first digit of an access code, to
insert prepause timing. Prepause
timing is assigned by CM41 Y = 0,
Function No. 44. 
Note 2:If “C” is inserted in the access code,
it can be used as a pause (1.5 sec.).
To provide a programmable pause,
insert “D” instead of “C” (Pro-
grammable Pause:CM41 Y = 0,
Function No. 38).• YY = 00
(1) 3: Access Code to be sent out before a 
Mail Box No. Note 1 
4: Access Code to be sent out after a 
Mail Box No. 
(2) X: Access code to be sent out to 
a VMS
XXXX: X: 0-9, A (*), B (#), C/
D (Pause) Note 2
NONE : Available/Not Available
Specify the prepause timing, DTMF Signal 
Width, and Inter-digital Pause for VMS.•Y = 0
(1) 44 (Prepause Timing)
(2) 00-12, 13: 0-12 sec. in 1 sec increments, 
0.5 sec.
If no data is set, the default setting is 1 second.
Specify the DTMF signal width for VMS. • Y = 0
(1) 48
(2) 00/01: 64 msec/128 msec
If no data is set, default setting is 128 msec.
Specify the DTMF inter-digital pause for 
VMS.•Y = 0
(1) 49
(2) 00: 32 msec. 04: 128 msec
01: 64 msec. 05: 160 msec.
02: 80 msec. 06: 192 msec.
03: 96 msec. 07: 240 msec.
If no data is set, default setting is 160 msec.
Assign VMS display, if required. • Y = 0 (By Character Code)
(1) X-XXXX: Station No.
(2) 564D53 (VMS character code)
• Y = 1 (By Character)
(1) X-XXXX: Station No.
(2) VMS (Character)
CM50
CM77
CM41
B
A