NEC Neax2000 Ivs Feature Programming Manual
Have a look at the manual NEC Neax2000 Ivs Feature Programming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 2 ND-45670 (E) Pag e 2 50 Revision 2.0 INDIVIDUAL ATTENDANT ACCESS PROGRAMMING DESCRIPTION DATA Assign an Attendant Console Number to each SN610 ATTCON.(1) 0000-0511 (LEN) (2) E000-E007 (SN610 ATTCON No.) Assign the access code for Individual Attendant Access. • Y = 0-3 (Numbering Plan Group 0-3) (1) X-XXX (Access Code) (2) 095 Specify the Individual Attendant Access capability provided from a station belonging to a different tenant. (1) 143 (2) 0/1 : Restricted/Allowed START END CM10 CM08 CM20
ND-45670 (E) CHAPTER 2 Page 251 Revision 2.0 INTERCEPT ANNOUNCEMENT PROGRAMMING DESCRIPTION DATA Assign a Digital Announcement Trunk Circuit No. to the required LEN. Note:The Digital Announcement Trunk Circuit No. must be assigned to the first LEN (Level 0) and/or the third LEN (Level 2) of each LT slot. (1) LEN (0000-0511) (2) EB000-EB127: Digital Announcement Trunk Circuit No. For PIM0/1: EB000-EB031 For PIM2/3: EB032-EB063 For PIM4/5: EB064-EB095 For PIM6/7: EB096-EB127 Assign Service Restriction Class (A) to the required stations.• YY = 02 (1) X-XXX: Station No. (2) XX XX *a: Service Restriction Class (A) Assign Digital Announcement Trunk Circuit access to Service Restriction Class (A) assigned by CM12 YY = 02. • YY = 33 (1) XX: Service Restriction Class (A) as- signed by CM12 YY = 02. (2) 1 : Allowed Assign the function to each Digital Announcement Trunk Circuit. • YY = 00 (1) 000-127 [Voice Digital Announcement Trunk Circuit No. assigned by CM10 (EB000-EB127)] (2) 0A00: Call Forwarding-Intercept An- nouncement Assign a Digital Announcement Trunk Circuit as the destination of the call intercepted on each Tenant.• YY = 07 (1) 00-63 (Tenant No.) (2) EB000-EB127 (Digital Announcement Trunk Circuit No.) To record, replay, or delete a message, assign the appropriate Digital Announcement Trunk access codes. • Y = 0-3 (Numbering Plan Group 0-3) (1) X-XXX (Access Code) (2) A00: Digital Announcement Trunk access (Record) A01: Digital Announcement Trunk access (Replay) A02: Digital Announcement Trunk access (Delete) START END CM10 CM20 CM12 CM15 CM49 CM51 *a
CHAPTER 2 ND-45670 (E) Pag e 2 52 Revision 2.0 INTERCOM: MANUAL INTERCOM PROGRAMMING DESCRIPTION DATA Assign a Manual Intercom number to the Virtual LEN. The last two digits of each Manual Intercom Number represent the Manual Intercom Group Number. Note:A Manual Intercom group can con- sist of two to six Multiline Termi- nals. A maximum of 25 Manual Intercom groups can be assigned per system. MANUAL INTERCOM GROUPINTERCOM GROUP 00 A200, A300, A400, A500, A600, A700 01 A201, A301, A401, A501, A601,A 701 24 A224, A324, A424, A524, A624, A724 (1) 0000-0255 (Virtual LEN) (2) A200-A224 A300-A324 A400-A424 A500-A524 A600-A624 A700-A724 (Manual Intercom Numbers) Assign the Manual Intercom Station. • YY = 03 (1) Manual Intercom No. assigned by CM11. (2) 06: Manual Intercom Assign the Primary Extension No. of each Multiline Terminal to each Manual Intercom Number.• YY = 11 (1) Manual Intercom No. assigned by CM11. (2) Primary Extension No. Assign the MANUAL INTERCOM key to each Multiline Terminal.• YY = 00 (1) Primary Extension No. + +Key No. (01-16) (2) Manual Intercom No. of each Multiline Terminal. Specify the Manual Intercom access capability when a called intercom station has set Do Not Disturb.(1) 238 (2) 0/1 : No Ring on/Ring on (Allowed) START END CM11 CM08 CM12 CM56 CM90,
ND-45670 (E) CHAPTER 2 Page 253 Revision 2.0 INTERCOM: AUTOMATIC INTERCOM PROGRAMMING Note:To activate the Voice Announcement call, refer to INTERNAL TONE/VOICE SIGNALING. DESCRIPTION DATA Assign an Automatic Intercom number to the Virtual LEN. The Automatic Intercom Stations are paired as shown below. GROUP No. INTERCOM NUMBER 00 A000, A100 01 A001, A101 31 A031, A131 Note:The maximum number of Automatic Intercom paired stations per system is 32.(1) 0000-0255 (Virtual LEN) (2) A000-A031 A100-A131 (Automatic Intercom Number) A X XX *a: 0/1 to be made one pair. *b: Automatic Intercom Group No. (00-31) Assign each Automatic Intercom Station. • YY = 03 (1) Automatic Intercom No. assigned by CM11. (2) 05: Automatic Intercom Assign the Primary Extension number to each Automatic Intercom Number.• YY = 10 (1) A000-A031 A100-A131 (Automatic Intercom No. assigned by CM11) (2) X-XXXX (Primary Extension No.) Assign the AUTOMATIC INTERCOM Key to each Multiline Terminal.• YY = 00 (1) Primary Extension No. + + Key No. (01-16) (2) A000-A031 A100-A131 (Automatic Intercom No. of each Multi- line Terminal) Specify the Automatic Intercom access capability when a called intercom station has set Do Not Disturb. (1) 237 (2) 0/1 : Restricted/Allowed A START CM90 CM08 CM12 CM56 CM11 *a *b ,
CHAPTER 2 ND-45670 (E) Pag e 2 54 Revision 2.0 INTERCOM: AUTOMATIC INTERCOM DESCRIPTION DATA Specify the busy indication on the Automatic Intercom LED when the other Multiline Terminal of the same Automatic Intercom Group is busy.•YY = 11 (1) X-XXXX: Primary Extension Number (2) 0 : Allowed 1 : Restricted END CM13 A
ND-45670 (E) CHAPTER 2 Page 255 Revision 2.0 INTERCOM: DIAL INTERCOM PROGRAMMING DESCRIPTION DATA Assign a Dial Intercom number to the Virtual LEN. The last two digits of each Dial Intercom No. represent the Dial Intercom Group No. The first digit is the intercom code (0-9) assigned to the associated virtual extension. GROUP No. INTERCOM No. 00 B000, B100, B200 — B900 01 B001, B101, B201 — B901 24 B024, B124, B224 — B924 Note:A maximum of 25 Dial Intercom groups are available per system. A maximum of ten Multiline Terminals can belong to a Dial Intercom group.(1) 0000-0255 (Virtual LEN) (2) B000-B024 B100-B124 B200-B224 B300-B324 B400-B424 B500-B524 B600-B624 B700-B724 B800-B824 B900-B924 (Dial Intercom Numbers) B X XX *a: Intercom Code (0-9) *b: Dial Intercom Group Assign the Dial Intercom Station. • YY = 03 (1) Dial Intercom No. assigned by CM11. (2) 07: Dial Intercom Assign the Primary Extension number to each Dial Intercom Number. • YY = 12 (1) Dial Intercom Number (B000-B924) (2) Primary Extension No. Assign the DIAL INTERCOM key to each Multiline Terminal.• YY = 00 (1) Primary Extension No. + +key No. (01 - 16) (2) Dial Intercom No. of each Multiline Terminal. A START CM90 CM12 CM56 CM11 *a *b ,
CHAPTER 2 ND-45670 (E) Pag e 2 56 Revision 2.0 INTERCOM: DIAL INTERCOM Note:To activate the Voice Announcement call, refer to INTERNAL TONE/VOICE SIGNALING. DESCRIPTION DATA If the Private Dial Intercom is provided, assign the data to disable Executive Override to each Dial Intercom. • CM12 YY = 02 (1) BXXX: Dial Intercom No. assigned by CM11. (2) XX XX *a: Service Restriction Class (A) (00-15 ) • CM15 YY = 09 (1) Service Restriction Class (A) (00-15) assigned by CM12 YY = 02 (2) 0: Restricted Specify the Dial Intercom access capability when a called intercom station has set Do Not Disturb.(1) 239 (2) 0/1 : Restricted/Allowed . END A CM08 CM12 CM15 *a
ND-45670 (E) CHAPTER 2 Page 257 Revision 2.0 INTERNAL TONE / VOICE SIGNALING PROGRAMMING DESCRIPTION DATA To activate the Single-Digit Feature Access Code feature, set the data for 050, 051, 069 and 148 to “1”.(1) 050: * Button as Switch Hook Flash. (2) 1 : Ineffective (1) 051: # Button as Switch Hook Flash. (2) 1 : Ineffective (1) 069: Single Digit Dialing on BT Connection (2) 1 : Step Call (1) 148: Same Last Digit Redialing on BT Connection (2) 1 : Ineffective Provide the System with the Single-Digit Feature Access Code on RBT (or Voice Call Connection).(1) 156 (2) 0: Available Specify if Voice Call is provided when calling a Multiline Terminal is set to Voice First from a Single-Line Telephone or a Multiline Terminal without an LCD.(1) 270: (2) 0 : Not to be provided (Ring Tone) 1 : To be provided Assign the Class of Service for Voice Call (called side) to the required Multiline Terminal.• CM12 YY = 02 (1) X-XXXX: Primary Extension No. (2) XX XX *a: Service Restriction Class (B) (00- 15 ) • CM15 YY = 67 (1) 00-15: Service Restriction Class (B) assigned by CM12 YY = 02 (2) 0: Restricted 1 : Allowed A START CM08 CM12 CM15*a
CHAPTER 2 ND-45670 (E) Pag e 2 58 Revision 2.0 INTERNAL TONE / VOICE SIGNALING DESCRIPTION DATA Assign the Class of Service for Voice Call Mike Off (called side) to the required Multiline Terminal.• CM12 YY = 07 (1) X-XXX: Primary Extension No. (2) XXX: Service Restriction Class (C) (00- 15 ) • CM15 YY = 99 (1) XX: Service Restriction Class (C) assigned by CM12 YY = 07 (2) 0: Available Assign the Voice Call/Ring Tone Programming access code.• Y = 0-3 (Numbering Plan Group 0-3) (1) X-XXX: Access Code (2) A63: Voice Call/Ring Tone Programming END CM12 CM15 CM20 A
ND-45670 (E) CHAPTER 2 Page 259 Revision 2.0 INTERNAL ZONE PAGING WITH MEET-ME PROGRAMMING To provide Internal Zone Paging with Meet-Me: DESCRIPTION DATA Assign the Class of Service for Internal Zone Paging to the required stations.• CM12 YY = 02 [Service Rest. Class (A) (00-15 )] • CM15 YY = 49 (1) Service Restriction Class (A) assigned by CM12 YY = 02, (00-15) (2) 1 : Allowed Assign Internal Zone Paging access codes and Meet-Me answer codes, as required.• Y = 0-3 (Numbering Plan Group 0-3) (1) X-XXX: Access code (50-54, 55-59) (2) A30-A37 (A30-A34) (Group 0-7: Pag- ing Access) A38-A45 (A38-A42) (Group 0-7: Meet- Me Answer) Assign the Dterm into the required Internal Zone Paging Groups. Note:A maximum of 8 internal zone paging is available. Up to 16 Multiline Ter- minals can be grouped per zone.• YY = 00-07 (Paging Group Number) (1) 00-15 (Serial number in a Paging Group) (2) X-XXXX Assign Internal Zone Paging to each button on the Multiline Terminal. • YY = 00 (1) X-XXXX (Primary Extension No.) + + Key No. (2) F1270 - F1277 (Group 0-7) START END CM12 CM15 CM20 CM56 CM90,