NEC Neax2000 Ivs Feature Programming Manual
Have a look at the manual NEC Neax2000 Ivs Feature Programming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 2 ND-45670 (E) Page 348-2 Addendum-001 Revision 2.1 JULY, 1998 This page is for your notes.
ND-45670 (E) CHAPTER 2 Page 349 Revision 2.0 PROPRIETARY MULTILINE TERMINAL: MULTIPLE LINE OPERATION PROGRAMMING HARDWARE REQUIRED Multiline Terminal and DLC card DESCRIPTION DATA Specify whether to enable ringing on call ter- mination to flexible line keys and feature keys. • YY = 01 (1) Primary Extension No. + + Key No. (2) 0/1 : Disabled/Enabled START END CM90 ,
CHAPTER 2 ND-45670 (E) Page 349-1 Addendum-001 Revision 2.1 JULY, 1998 PROPRIETARY MULTILINE TERMINAL: MUTE KEY (1900 Series Enhancement) PROGRAMMING DESCRIPTION DATA Assign the MUTE Key to the Multiline Terminal.• YY=00 (1) Primary Extension No. + + Key No. (2) F5013 (MUTE) START END CM90 ,
ND-45670 (E) CHAPTER 2 Addendum-001 Page 349-2 JULY, 1998 Revision 2.1 This page is for your notes.
CHAPTER 2 ND-45670 (E) Pag e 3 50 Revision 2.0 PROPRIETARY MULTILINE TERMINAL: OFF-HOOK VOICE ANNOUNCEMENT (1200 Series Enhancement) PROGRAMMING DESCRIPTION DATA Assign the Virtual-Line station No. for Off- Hook Voice Announcement.(1) 0000-0255: Virtual LEN (2) CX-CXXXX: Virtual-Line Station No. for Off-Hook Voice Announcement Note:X-XXXX represents Primary Exten- sion No. of Multiline Terminal. Assign the Virtual-line station for Off-Hook Voice Announcement to the required Multi- line Terminal.• YY=00 (1) Primary Extension No. (1-4 digits) + + Key No. (01-16) (2) CX-CXXXX: Virtual-Line Station No. for Off-Hook Voice Announcement assigned by CM11. Provide the Off-Hook Voice Announcement to the required Multiline Terminal.• YY=28 (1) X-XXXX: Station No. (1-4 digits) (2) 0: To be provided 1 : Not to be provided Specify the Voice Call when calling a Multi- line Terminal set to Voice First from a Single- Line Telephone or a Multiline Terminal with- out LCD.(1) 270 (2) 0: Not provided (Busy Tone) 1 : To be provided Specify the Voice Call when a called Multiline Terminal goes off-hook while being called via Off-Hook Voice Announcement.(1) 279 (2) 0: Not to be provided (Ring Tone) 1 : To be provided (Voice Call) Assign the Class of Service of Voice Call (called side) to the required Multiline Termi- nal.• CM12 YY=02 (1) X-XXXX: Primary Extension No. (2) XX XX *a *a: Service Restriction Class (B) (00-15t) • CM15 YY=67 (1) 00-15: Service Restriction Class (B) assigned by CM12 YY=02 (2) 1 : Available START CM11 A CM90 CM13 CM08 CM12 CM15 , INITIAL
ND-45670 (E) CHAPTER 2 Page 351 Revision 2.0 PROPRIETARY MULTILINE TERMINAL: OFF-HOOK VOICE ANNOUNCEMENT (1200 Series Enhancement) HARDWARE REQUIRED Multiline Terminal and DLC card APR or APA Unit DESCRIPTION DATA Assign the Service Restriction Class of Voice Call Mike Off (called side) to the required Multiline Terminal.• CM12 YY = 07 (1) X-XXXX: Primary Extension No. (2) XX: Service Restriction Class C (00-15 ) Note:This feature automatically turns the Microphone off at the called station.• CM15 YY = 99 (1) 00-15: Service Restriction Class C (2) 0 : Available 1 : Not Available Assign Service Restriction Class of Answer Hold to the required Multiline Terminal.• CM12 YY = 02 (1) X-XXXX: Primary Extension No. (2) XXXX *a *a: Service Restriction Class B (00-15 ) • CM15 YY = 72 (1) 00-15: Service Restriction Class B (2) 0 : Allowed Assign Voice Call/Ring Tone Programming access code.• Y = 0-3 (Numbering Plan Group 0-3) (1) X-XXX: Access Code (2) A63 CM12 A END CM12 CM15 CM20 CM15
CHAPTER 2 ND-45670 (E) Pag e 3 52 Revision 2.0 PROPRIETARY MULTILINE TERMINAL: PRIME LINE PICKUP PROGRAMMING HARDWARE REQUIRED Multiline Terminal and DLC card DESCRIPTION DATA Assign station or trunk to desired Multiline Terminal Extension as Prime Line. It is rec- ommended that the Primary Extension be as- signed as the Prime Line. (1) X-XXXX: Primary Extension No. (2) X-XXXX: Station No. Note 1, Note 2 DXXX: Trunk No. D000-D255 Note 1:Primary Extension No. or Virtual Line No. can be assigned to the Prime Line. However, the data sta- tion and Single Line Telephone can- not be assigned to the Prime Line. Note 2:By loading the Resident System Pro- gram, the Primary Extension Num- ber is assigned as Prime Line Number for all Multiline Terminals. START END CM93
ND-45670 (E) CHAPTER 2 Page 353 Revision 2.0 PROPRIETARY MULTILINE TERMINAL: RECALL KEY PROGRAMMING For internal call: RECALL Key is initially assigned to all Multiline Terminals. For internal call: HARDWARE REQUIRED Multiline Terminal and DLC card DESCRIPTION DATA Assign the data for hookflash signal sending to the route number assigned by CM30 YY = 00.• YY = 16 (1) Trunk Route No. (00-63) (2) 1 : Sending Assign a Flash Over Trunk key to the required Multiline Terminal.• YY = 00 (1) Primary Extension No. + + Key No. (2) F1009 Specify duration of the hookflash signal to trunks.•Y = 2 (1) 17 (2) 01-30: 128-1920 msec. in 64 msec. in- crements If no data is set, default setting is 576-640 msec. START END CM35 CM90 CM41 ,
CHAPTER 2 ND-45670 (E) Pag e 3 54 Revision 2.0 PROPRIETARY MULTILINE TERMINAL: RELAY CONTROL FUNCTION PROGRAMMING DESCRIPTION DATA Assign the PN-DK00 card to the required LEN. Note:The PN-DK00 card No. must be as- signed to the first LEN (Level 0) and/ or the third LEN (Level 2) of each LT slot.(1) LEN: 0000-0511 (2) E800-E831: PN-DK00 card No. For PIM0/1: E800-E807 For PIM2/3: E808-E815 For PIM4/5: E816-E823 For PIM6/7: E824-E831 Assign the function of relay control via Multi- line Terminal to the PN-DK00. (1) X XX *a: Card No. (00-31) assigned by CM10, E800-E831 *b: Circuit No. (0-3) (2) 15 00 *a: Relay Control Function Key *b: Relay Control (On/Off) Via Multi- line Terminal Assign the Relay Control (ON/OFF) key on the required Multiline Terminal. • YY = 00 (1) Primary Extension No. (1-4 digits) + + Key No. (2) F7 X XX *a: Card No. (00-31) assigned by CM10 E800-E831 *b: Circuit No. (0-3) assigned by CM44 START END CM10 CM90 CM44*a *b *a *b , *a *b
ND-45670 (E) CHAPTER 2 Page 355 Revision 2.0 PROPRIETARY MULTILINE TERMINAL: RELAY CONTROL FUNCTION HARDWARE REQUIRED • PN-DK00 card • External equipment provided locally • Multiline Terminal and DLC card • SN610 ATTCON and DLC card To accommodate the external equipment, make the following connection at the MDF. For details, refer to the MDF cross connection for an External Equipment in the INSTALLATION PROCEDURE MANUAL. o PN-DK00 CARD PZ-PW86 CARD GMDFEXTERNAL EQUIPMENT G