NEC Neax2000 Ivs Feature Programming Manual
Have a look at the manual NEC Neax2000 Ivs Feature Programming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 2 ND-45670 (E) Pag e 2 70 Revision 2.0 LEAST COST ROUTING-3/6-DIGIT Example: Conditions: (1) Order of LCR Selection: 1st... Route 02 (FX) 2nd... Route 01 (WATS) 3rd... Route 00 (DDD) (2) Dialed Number: 9 – 212 – NXX – XXXX *a: Access Code *b: Area Code *c: Office Code *d: Telephone Number (3) Toll Restriction Pattern: RCA RCB RCC RCD RCE 00 ––––– 01 –––´´ 02 – –´´´ 9-212- NXX- XXXXRT00 RT01 RT02DDD WATS FXC.O. AREA CODE 212NXX-XXXX *b *a *c *d –: Allowed ´: Restricted CLASS ROUTE
ND-45670 (E) CHAPTER 2 Page 271 Revision 2.0 LEAST COST ROUTING-3/6-DIGIT Programming for Example 1: Step 1 : Assign “9” to the access code of LCR Group 0 in Numbering Plan Group 0. + 200 + + 9 + + A26 + Step 2 : Assign Area Code Development Pattern No. 5 to LCR Group 0. + 8AA00 + + 0 + + 5 + Step 3 : Assign Route Pattern No. 00 to area code (212) for Area code Development Pattern No. 5. + 8A405 + + 212 + + 000 + Step 4 : In Route Pattern No. 00, specify the order of LCR selection as shown below. 1st: Route 02 (FX) + 8A000 + + 1 + + 000 02 + LCR Pattern No. 000 2nd: Route 01 (WATS) + 8A000 + + 2 + + 001 01 + LCR Pattern No. 001 3rd: Route 00 (DDD) + 8A000 + + 3 + + 002 00 + LCR Pattern No. 002 Step 5 : In LCR Pattern No. 000 (for FX), delete the area code dialed. + 8A500 + + 151 + + 0 + LCR Pattern No. 000 To be deleted Step 6 : Assign the Toll Restriction Pattern to each Route (LCR Pattern No.) For LCR Pattern No. 000 (Route 02): + 8A500 + + 000 + + 10 + Toll Restriction Pattern No. specified by CM81. For LCR Pattern No. 001 (Route 01): + 8A501 + + 000 + +09 + For LCR Pattern No. 002 (Route 00): + 8A502 + + 000 + + 01 + Step 7 : Assign the maximum number of digits dialed. + 855 + + 212 + + 10 + Area Code 10 digits (including the area code) ST DEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE Area Code Development Pattern No. 5
CHAPTER 2 ND-45670 (E) Pag e 2 72 Revision 2.0 LEAST COST ROUTING-3/6-DIGIT Example: Conditions: (1) Order of LCR Selection: 1st... Route 02 (FX) 2nd... Route 01 (WATS) 3rd... Route 00 (DDD) (2) Dialed Number: • 9-214-232/236-XXXX Note:236 is a Toll Office. • 9-213-NXX-XXXX (3) Toll Restriction Pattern: Note: Area Code 213 is restricted.RCA RCB RCC RCD RCE 00 ––––– 01 – –´´ 02 –´´´ RT00 RT01 RT02DDD WATSFX C.O. AREA CODE 214 236 232 1-236-XXXX 213-NXX-XXXX AREA CODE 213 –: Allowed ´: Restricted CLASS ROUTE Note– Note–
ND-45670 (E) CHAPTER 2 Page 273 Revision 2.0 LEAST COST ROUTING-3/6-DIGIT Programming for Example 2: Step 1 : Assign “9” to the access code of LCR Group 0 in Numbering Plan Group 0. + 200 + + 9 + + A26 + Step 2 : Assign Area Code Development Pattern No. 5 to LCR Group 0. + 8AA00 + + 0 + + 5 + Step 3 : Assign Route Pattern Nos. 00 and 01to area codes 214 and 213 respectively. + 8A405 + + 214 + + 000 + Route Pattern No. 00 + 8A405 + + 213 + + 001 + Route Pattern No. 01 Step 4 : Specify the order of LCR selection to each Route Pattern. For Route Pattern 00: 1st: Route 00 (FX) + 8A000 + + 1 + + 000 00 + LCR Pattern No. 000 2nd: Route 01 (WATS) + 8A000 + + 2 + + 001 01 + LCR Pattern No. 001 3rd: Route 02 (DDD) + 8A000 + + 3 + + 002 02 + LCR Pattern No. 002 For Route Pattern 01: 1st: Route 00 (FX) + 8A001 + + 1 + + 003 00 + LCR Pattern No. 003 2nd: Route 01 (WATS) + 8A001 + + 2 + + 004 01 + LCR Pattern No. 004 3rd: Route 02 (DDD) + 8A001 + + 3 + + 005 02 + LCR Pattern No. 005 ST DEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE
CHAPTER 2 ND-45670 (E) Pag e 2 74 Revision 2.0 LEAST COST ROUTING-3/6-DIGIT –: Allowed ´: Restricted Step 5 : In LCR Pattern Nos. 000 and 003, delete the area code dialed. + 8A500 + + 151 + + 0 + LCR Pattern No. 000 To be deleted + 8A503 + + 151 + + 0 + LCR Pattern No. 003 To be deleted Step 6 : Assign the Toll Restriction Pattern to each LCR Pattern No. For LCR Pattern No. 000: + 8A500 + + 000 + + 01 + LCR Pattern No. 000 Toll Restriction Pattern No. specified by CM81. For LCR Pattern No. 001: + 8A501 + + 000 + + 03 + For LCR Pattern No. 002: + 8A502 + + 000 + + 04 + For LCR Pattern No. 003: + 8A503 + + 000 + + 01 + For LCR Pattern No. 004: + 8A504 + + 000 + + 04 + For LCR Pattern No. 005: + 8A505 + + 000 + + 05 + AREA CODEROUTE PATTERN No.ORDER OF LCRROUTELCR PATTERN No.RCA RCB RCC RCD RCE 214 00 1st 00 000 – – – – – 2nd 01 001 – – –´´ 3rd 02 002 – –´´´ 21301 1st 00 003 – – – – – 2nd 01 004 – –´´´ 3rd 02 005 –´´´´ TOLL RESTRICTION STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE STDEDEEXE
ND-45670 (E) CHAPTER 2 Page 275 Revision 2.0 LEAST COST ROUTING-3/6-DIGIT Step 7: In LCR Pattern No. 000, designate the prefix “1”, in addition to the office code 236, by the six-digit Prefix Pattern. • Designation of 6-digit Prefix Pattern No. + 8A500 + + 150 + + 00 + 6-digit Prefix Pattern No. 00 • Designation of office code requiring Prefix Pattern. + 8A800 + + 236 + + 1 + 6-digit Prefix Pattern No. 00 Step 8 : Assign the maximum number of digits dialed. + 855 + + 21 + + 10 + Area Code 10 digits ST DEDEEXE STDEDEEXE STDEDEEXE Area Code Develop-
CHAPTER 2 ND-45670 (E) Pag e 2 76 Revision 2.0 LINE LOCKOUT PROGRAMMING DESCRIPTION DATA Provide the system with Howler Tone sent to locked-out stations, if required.(1) 153 (2) 0/1 : Not provide/Provide If Howler Tone is provided (CM08-153 = 1), set this feature to the required stations.• YY = 04 (1) X-XXXX (Station No.) (2) 1 : Provide Specify the timing for Line Lockout. • Y = 0 (1) 22 (2) 01-08: 4-32 sec. in 4 sec. increments If no data is set, the default setting is 28-32 seconds. Specify the number of stations in Line Lockout to give a MN alarm.(1) 01 (2) 01-99: Number of Lockout Stations If no data is set, no Lockout Alarm Display functions.CM08 START CM13 CM41 CM42 END
ND-45670 (E) CHAPTER 2 Page 277 Revision 2.0 LINE PRESELECTION PROGRAMMING DESCRIPTION DATA Specify the operation of Line Preselection on a Multiline Terminal. (1) 199 (2) 0 : Only desired line key. 1 : SPKR key is required after pressing the desired line key. START END CM08
CHAPTER 2 ND-45670 (E) Pag e 2 78 Revision 2.0 MAINTENANCE ADMINISTRATION TERMINAL (MAT) PROGRAMMING To provide password service for the MAT: DESCRIPTION DATA Specify the command codes accessible to each Password Level.• YY = 00: Password Level 0-6 • YY = 01: Password Level 1-6 • YY = 02: Password Level 2-6 • YY = 03: Password Level 3-6 • YY = 04: Password Level 4-6 • YY = 05: Password Level 5-6 • YY = 06: Password Level 6 • YY = 10: Password Level 0 • YY = 11: Password Level 1 • YY = 12: Password Level 2 • YY = 13: Password Level 3 • YY = 14: Password Level 4 • YY = 15: Password Level 5 • YY = 16: Password Level 6 (1) XX *a: 00-FF (Command Codes exclusive of 03, E7, E9) (2) 0/1 : Allowed/Restricted Enable the system to change the password. (1) 8 (2) 0 : Allowed Assign a password to each Password Level. (1) 0-7 (Password Level 0-7) (2) X-X...X (Max. 8 digits Password Code) A password code for Password Level 7 should be assigned in advance because of providing the password service by Func- tion No. 9 of CME9. The following passwords are not available. “CCCCCCCC” “FFFFFFFF” Provide the system with Password Service. After setting this data, access to system programming is only available with password entry. (1) 9 (2) 0: Provided CME7 START CME9 END *a
ND-45670 (E) CHAPTER 2 Page 279 Revision 2.0 MAINTENANCE ADMINISTRATION TERMINAL (MAT) Note:If the Password Service is provided, enter a password predetermined by CM03 before programming from the MAT. + 03 + + Password Level No. (0-7) + + Password + - “OK” will be displayed, if accepted. - “DATA ERROR” will be displayed if the password is incorrect. ST DEDEEXE