Panasonic Kx Td500 User Manual
Have a look at the manual Panasonic Kx Td500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 76
Station Programming
76User Manual
Secondary Directory Number (SDN) Button (Assignment)
Allows you to assign a Flexible (CO) button as an SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
An SDN button should have its associated PDN button of another extension. This
assignment is available for extensions on which at least one PDN button is already assigned
(DN type PT). Otherwise, the SDN...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-75.png "Page 76
Station Programming
76User Manual
Secondary Directory Number (SDN) Button (Assignment)
Allows you to assign a Flexible (CO) button as an SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
An SDN button should have its associated PDN button of another extension. This
assignment is available for extensions on which at least one PDN button is already assigned
(DN type PT). Otherwise, the SDN...")
![Page 77
Station Programming
User Manual77
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Single-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot assign the same CO line to more than one S-CO button on a PT.
You can assign the same CO line to an S-CO button, a G-CO button and an L-CO button
respectively.
An S-CO button assigned to a DSS button is...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-76.png "Page 77
Station Programming
User Manual77
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Single-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot assign the same CO line to more than one S-CO button on a PT.
You can assign the same CO line to an S-CO button, a G-CO button and an L-CO button
respectively.
An S-CO button assigned to a DSS button is...")
![Page 78
Station Programming
78User Manual
Tone Through Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Tone Through button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Features Guide References
1.12 Conversation Features
End-to-End DTMF Signaling (Tone Through)
PT
Press the desired Flexible (CO,
DSS) button you wish to assign
as the Tone Through button.Dial 78.Press STORE.
AUTO DIAL
STORE87...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-77.png "Page 78
Station Programming
78User Manual
Tone Through Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Tone Through button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Features Guide References
1.12 Conversation Features
End-to-End DTMF Signaling (Tone Through)
PT
Press the desired Flexible (CO,
DSS) button you wish to assign
as the Tone Through button.Dial 78.Press STORE.
AUTO DIAL
STORE87...")
![Page 79
Station Programming
User Manual79
Two-Way Record Button (Assignment)*1
Allows you to assign a Flexible (CO, DSS) button as a Two-Way Record button.
This allows you to record a conversation into your own mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot enter a non-existent extension or floating directory number.*2
Please refer to Floating Station of Section 1.3 System Features in the...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-78.png "Page 79
Station Programming
User Manual79
Two-Way Record Button (Assignment)*1
Allows you to assign a Flexible (CO, DSS) button as a Two-Way Record button.
This allows you to record a conversation into your own mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot enter a non-existent extension or floating directory number.*2
Please refer to Floating Station of Section 1.3 System Features in the...")
![Page 80
Station Programming
80User Manual
– [EXT No.2] Group No.
Two-Way Transfer Button (Assignment)*1
Allows you to assign a Flexible (CO, DSS) button as a Two-Way Transfer button.
This allows you to record a conversation into a desired mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot enter a non-existent extension or floating directory number.*2
Please refer to Floating Station of Section...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-79.png "Page 80
Station Programming
80User Manual
– [EXT No.2] Group No.
Two-Way Transfer Button (Assignment)*1
Allows you to assign a Flexible (CO, DSS) button as a Two-Way Transfer button.
This allows you to record a conversation into a desired mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot enter a non-existent extension or floating directory number.*2
Please refer to Floating Station of Section...")
![Page 81
Station Programming
User Manual81
– [EXT No.1] Group No.
– [EXT No.2] DN
– [EXT No.2] Group No.
Voice Mail (VM) Transfer Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a VM Transfer button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot enter non-existent extension or a floating directory number.*1
Please refer to Floating Station of Section 1.3 System Features in...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-80.png "Page 81
Station Programming
User Manual81
– [EXT No.1] Group No.
– [EXT No.2] DN
– [EXT No.2] Group No.
Voice Mail (VM) Transfer Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as a VM Transfer button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
You cannot enter non-existent extension or a floating directory number.*1
Please refer to Floating Station of Section 1.3 System Features in...")
![Page 82
Station Programming
82User Manual
2.2.4 Full One-Touch Dialing Assignment
Allows you to enable or disable the Full One-Touch Dialing function. The Hands-free
Operation mode is activated by pressing a One-Touch Dialing button, DSS button, REDIAL
button or SAVE button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is On.
PT
Dial 3.Press STORE.
or
Dial 1 or 2.
1 : to select the off mode
2 :...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-81.png "Page 82
Station Programming
82User Manual
2.2.4 Full One-Touch Dialing Assignment
Allows you to enable or disable the Full One-Touch Dialing function. The Hands-free
Operation mode is activated by pressing a One-Touch Dialing button, DSS button, REDIAL
button or SAVE button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is On.
PT
Dial 3.Press STORE.
or
Dial 1 or 2.
1 : to select the off mode
2 :...")
![Page 83
Station Programming
User Manual83
2.2.5 Handset / Headset Selection
Allows you to select the handset mode or headset mode.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Handset.
PT
Dial 9.Press STORE.
or
Dial 1 or 2.
1 : to select Handset mode
2 : to select Headset mode
129
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial programming mode. The display shows the...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-82.png "Page 83
Station Programming
User Manual83
2.2.5 Handset / Headset Selection
Allows you to select the handset mode or headset mode.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Handset.
PT
Dial 9.Press STORE.
or
Dial 1 or 2.
1 : to select Handset mode
2 : to select Headset mode
129
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial programming mode. The display shows the...")
![Page 84
Station Programming
84User Manual
2.2.6 Initial Display Selection
Allows you to select the initial display, Caller ID, CO line name or DID name which is shown
on the display when a call is received.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Caller ID mode.
PT
Dial 81.Press STORE.
or
Dial 1, 2 or 3.
1 : for the Caller ID
2 : for the CO line name
3 : for the DID name
1182
AUTO DIAL...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-83.png "Page 84
Station Programming
84User Manual
2.2.6 Initial Display Selection
Allows you to select the initial display, Caller ID, CO line name or DID name which is shown
on the display when a call is received.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Caller ID mode.
PT
Dial 81.Press STORE.
or
Dial 1, 2 or 3.
1 : for the Caller ID
2 : for the CO line name
3 : for the DID name
1182
AUTO DIAL...")
![Page 85
Station Programming
User Manual85
2.2.7 Intercom Alert Assignment
Allows you to select the alert mode (tone / voice) when receiving an intercom (extension) call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Ring-Calling (Tone Call).
PT
Dial 4.Press STORE.
or
Dial 1 or 2.
1 : to select the Ring-Calling (Tone Call) mode
2 : to select the Voice-Calling mode
142
AUTO DIAL
STORE
The STORE...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-84.png "Page 85
Station Programming
User Manual85
2.2.7 Intercom Alert Assignment
Allows you to select the alert mode (tone / voice) when receiving an intercom (extension) call.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Ring-Calling (Tone Call).
PT
Dial 4.Press STORE.
or
Dial 1 or 2.
1 : to select the Ring-Calling (Tone Call) mode
2 : to select the Voice-Calling mode
142
AUTO DIAL
STORE
The STORE...")
![Page 86
Station Programming
86User Manual
2.2.8 Live Call Screening (LCS) Mode Set*1
Assigns whether the recording message is monitored through the built-in speaker (Hands-free
mode) or an alert tone is sent (Private mode) while incoming callers are leaving a message in
the called extensions mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Hands-free mode.
*1Available when the Digital...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-85.png "Page 86
Station Programming
86User Manual
2.2.8 Live Call Screening (LCS) Mode Set*1
Assigns whether the recording message is monitored through the built-in speaker (Hands-free
mode) or an alert tone is sent (Private mode) while incoming callers are leaving a message in
the called extensions mailbox.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is Hands-free mode.
*1Available when the Digital...")
Station Programming User Manual81 – [EXT No.1] Group No. – [EXT No.2] DN – [EXT No.2] Group No. Voice Mail (VM) Transfer Button (Assignment) Allows you to assign a Flexible (CO, DSS, PF) button as a VM Transfer button. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. Conditions You cannot enter non-existent extension or a floating directory number.*1 Please refer to Floating Station of Section 1.3 System Features in the Features Guide. Programming Guide References 3.3 Extension Group – FDN – Group Type 5.10 VPS Integration *1A Floating Directory Number (FDN) is a virtual extension number which appears to be an extension. (-xxxx:VM extension number) To erase an incorrect entry, press the CLR (S2) button or the TRANSFER (CLEAR) button. (The TRANSFER button becomes the CLEAR button in the Station Programming mode.) VTR- CLR VTR-xxxx CLR PT Press the desired Flexible (CO, DSS, PF) button you wish to assign as the VM Transfer button.Dial 8.Press STORE. Enter the Voice Mail extension number (3 or 4 digits). Voice Mail extension no.AUTO DIAL STORE8 The STORE indicator lights. The display shows the initial programming mode.
Station Programming 82User Manual 2.2.4 Full One-Touch Dialing Assignment Allows you to enable or disable the Full One-Touch Dialing function. The Hands-free Operation mode is activated by pressing a One-Touch Dialing button, DSS button, REDIAL button or SAVE button. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. Conditions The default is On. PT Dial 3.Press STORE. or Dial 1 or 2. 1 : to select the off mode 2 : to select the on mode AUTO DIAL STORE132 The STORE indicator lights. The display shows the initial programming mode. The STORE indicator light turns off. Hands-free:Off(–When disabled)
Station Programming User Manual83 2.2.5 Handset / Headset Selection Allows you to select the handset mode or headset mode. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. Conditions The default is Handset. PT Dial 9.Press STORE. or Dial 1 or 2. 1 : to select Handset mode 2 : to select Headset mode 129 AUTO DIAL STORE The STORE indicator lights. The display shows the initial programming mode. The display shows the current status.
Station Programming 84User Manual 2.2.6 Initial Display Selection Allows you to select the initial display, Caller ID, CO line name or DID name which is shown on the display when a call is received. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. Conditions The default is Caller ID mode. PT Dial 81.Press STORE. or Dial 1, 2 or 3. 1 : for the Caller ID 2 : for the CO line name 3 : for the DID name 1182 AUTO DIAL STORE The STORE indicator lights. The display shows the initial programming mode. The display shows the current display type. or3
Station Programming User Manual85 2.2.7 Intercom Alert Assignment Allows you to select the alert mode (tone / voice) when receiving an intercom (extension) call. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. Conditions The default is Ring-Calling (Tone Call). PT Dial 4.Press STORE. or Dial 1 or 2. 1 : to select the Ring-Calling (Tone Call) mode 2 : to select the Voice-Calling mode 142 AUTO DIAL STORE The STORE indicator lights. The display shows the initial programming mode. When Ring-Calling (Tone Call) mode is selected; When Voice-Calling mode is selected; Voice Call Tone Call
Station Programming 86User Manual 2.2.8 Live Call Screening (LCS) Mode Set*1 Assigns whether the recording message is monitored through the built-in speaker (Hands-free mode) or an alert tone is sent (Private mode) while incoming callers are leaving a message in the called extensions mailbox. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. Conditions The default is Hands-free mode. *1Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic Voice Processing System (one that supports Digital Proprietary Telephone [DPT] integration; e.g., KX-TVS100). PT Dial 7.Press STORE. or Dial 1 or 2. 1 : for the Hands-free 2 : for the Private mode 172 AUTO DIAL STORE The STORE indicator lights. The display shows the initial programming mode. When the Hands-free mode is selected; When the Private mode is selected; Private Hands-free
Station Programming User Manual87 2.2.9 PDN/SDN Button Delayed Ringing Assignment Allows you to assign a delayed ringing function on the PDN/SDN button. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. Conditions If more than one PDN button is assigned on a PT, Delayed Ringing can be set to the first PDN button (assigned to the CO 01) only. This Delayed Ringing setting applies to all PDN buttons on the same PT. If you want to change the delayed ringing type, enter another type number again. Immediate Ring 1-ring Delay PT Press PDN or SDN you wish to assign the delayed ringing function.Dial 76. or Press STORE. Enter the delayed ringing type number (0 through 4). -0: Immediate Ring -1: 1-ring Delay -2: 3-ring Delay -3: 6-ring Delay -4: No Ring delayed ringing type no.67 AUTO DIAL (PDN) (SDN) STORE The STORE indicator lights. The display shows the initial programming mode.
Station Programming 88User Manual 2.2.10 Phantom Button Ringing On/Off Assignment Allows you to assign a ringing On/Off function on a Phantom button. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. Ring On PT Press Phantom you wish to turn On/Off the ringing.Dial 1or 2. -1: Ring Off -2: Ring Onor Press STORE. Press the same Phantom again. 12 AUTO DIAL (Phantom) STORE The STORE indicator lights. The display shows the initial programming mode. The display shows the current status.
Station Programming User Manual89 2.2.11 Preferred Line Assignment — Incoming Allows you to select the method used to answer incoming calls from the following three line preferences: a)No Line Preference b)Ringing Line Preference (— default) c)Prime Line Preference Follow the corresponding programming procedure according to your selection.
Station Programming 90User Manual No Line Preference — Incoming (Assignment) No line is selected when you go off-hook to answer a call. You must select a line to answer an incoming call. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. Ringing Line Preference — Incoming (Assignment) You are connected to a call ringing on your extension automatically, when you go off-hook to answer a call. — Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. — To exit the Station Programming mode: Press [PROGRAM]. PT Dial 1.Press STORE. Dial 2. 12 AUTO DIAL STORE The STORE indicator lights. The display shows the initial programming mode. The display shows the current status. Pref.In :No PT Dial 2.Press STORE. Dial 2. 22 AUTO DIAL STORE The STORE indicator lights. The display shows the initial programming mode. The display shows the current status. Pref.In :Ring