Panasonic Kx Td500 User Manual

							Station Features and Operation (PT/SLT)
User Manual211
4.3.17 Call Waiting
During a call, a Call Waiting tone informs you that there is another call waiting for you. You 
can answer the second call by disconnecting or placing the current call on hold.
PT users can choose one of three Call Waiting modes.
Setting
SLT
PT
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and dial tone1. Dial 7311.
2. Dial 7312.
3. Dial 7313.
1. Call Waiting BSS
2. Call Waiting OHCA
3. Call Waiting W-OHCA7
7
7
3
3
3
1
1
1
1
2
3
Lift the handset.Hang up.Confirmation tone
and dial tone Dial 7311.
3171

C.Waiting W-OHCA
C.Waiting OHCA C.Waiting BSS -1 :
-2 :
-3 : 
						

							Station Features and Operation (PT/SLT)
212User Manual
Canceling
To talk to the new party by terminating the current call
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and dial tone Dial 7310.
3710

C.Waiting Off
PTSLT
Talk to the
new caller.
While hearing a Call Waiting tone;
Press the flashing CO or
INTERCOM or DN.
or
Talk to the new caller.
While hearing a Call Waiting tone;
Lift the handset. Hang up.
or(CO)INTERCOM(DN)
The current call is disconnected. The current call is disconnected. 
						

							Station Features and Operation (PT/SLT)
User Manual213
To talk to the new party by holding the current call
PT
SLT
Talk to the
new caller. Press the flashing
CO or INTERCOM or DN.
or
Press HOLD.
While hearing the Call Waiting tone and the CO or INTERCOM or DN indicator is flashing rapidly;
Talk to the
new caller.
While hearing a Call Waiting tone;
Lift the
handset. Hang up.Flash the 
switchhook.Dial toneConfirmation tone
and dial toneDial 50.
HOLD(CO)INTERCOMor(DN)
50
The current call is placed on hold.
The current call is placed on hold.
If both the current call and new call are extension calls,
you will be connected to the new caller simply by pressing HOLD. 
						

							Station Features and Operation (PT/SLT)
214User Manual
Conditions
BSS / OHCA / Whisper OHCA
If an extension user dials 1 while hearing a busy tone, BSS or OHCA or Whisper OHCA 
may be activated at the called extension.
This is determined by the following conditions.
The call waiting tone is generated when a CO call, a doorphone call is received, or when an 
extension caller executes Busy Station Signaling.
Data Line Security
Setting Data Line Security temporarily cancels Call Waiting which has been turned on by 
an extension user.

BSS, OHCA and Whisper OHCA do not function, if the other extension is a DN type PT. 

Call Waiting Tone Selection
For PT users, two types of call waiting tones are provided to prevent them from missing the 
tone. A Call Waiting Tone type can be selected either by Station or System Programming.
Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial 
tone (dial tone 2) after going off-hook depending on System Programming .
With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature 
using the display operation.
Programming Guide References
2.3 Numbering Plan Calling extension Called extension
COS-OHCA 
assignmentCall Waiting setting
OFF ON
0123
Disable———BSS BSS BSS
Enable———BSS OHCA
*1 BSS
*1OHCA(Off-Hook Call Announcement ) is activated when the called extension is KX-T7130, KX-T7235 or 
KX-T7436.
W-OHCA*2  
OHCA  BSS
*2Whisper OHCA is activated when both calling and called extensions are using one of the KX-T7400 series PTs. 
						

							Station Features and Operation (PT/SLT)
User Manual215
– Call Waiting Set / Cancel
2.4 Class of Service (COS)
– Off-Hook Call Announcement (OHCA)
2.8 System Option
– Special dial tone after setting feature
– Answering Call Waiting call by SLT hooking
4.3 Extension Line
– Call Waiting Tone Type
Features Guide References
1.6 Originating Features
Busy Station Signaling (BSS)
Off-Hook Call Announcement (OHCA)
Off-Hook Call Announcement (OHCA), Whisper
1.9 Answering Features
Call Waiting
1.12 Conversation Features
Data Line Security
User Manual References
2.2.2 Call Waiting Tone Type Assignment
4.3.8 Busy Station Signaling (BSS)
4.3.25 Data Line Security
4.3.49 Off-Hook Call Announcement (OHCA)
4.3.50 Off-Hook Call Announcement (OHCA) —Whisper
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access 
Menu 
						

							Station Features and Operation (PT/SLT)
216User Manual
4.3.18 Call Waiting from Central Office
During a conversation with an outside party, a call waiting tone offered by the local Central 
Office signals your extension that there is another incoming CO call that is waiting. You can 
answer the second call by placing the first call on hold.
Using the FLASH button
7230 / 7235 / 7433 / 7436
EFA
S1
S2S3
While hearing a Call Waiting tone through the handset;
Press EFA(S2).
The current call is placed on hold and you can
talk to the second caller.
You can return to the first call by pressing the
EFA(S2) button again.
PT
Press FLASH.
While hearing a Call Waiting tone through the handset;
FLASH
The current call is placed on hold and
you can talk to the second caller.
You can return to the first call by 
pressing the FLASH button again. 
						

							Station Features and Operation (PT/SLT)
User Manual217
Using the feature number
Conditions
This is an optional telephone company service.
For more information, consult the local telephone company.
FLASH Button Operation
Pressing the FLASH button on a PT results in either sending Flash signal or disconnecting 
the current call.
This is determined by System Programming .
Flash Time
The flash time must be assigned as required by the Central Office.

This feature does not function, if an SLT has a call on Consultation Hold.
Programming Guide References
2.3 Numbering Plan
– External Feature Access
2.8 System Option
– FLASH button operation while CO talking
– FLASH button operation when Dont release the trunk is selected at #3
3.2 Trunk Group
– Flash Time
PT and SLT
Press TRANSFER or 
flash the switchhook.
While hearing a Call Waiting tone through the handset;
Dial 6.
6
The first party is placed on hold.
  You can talk to the second party.
  You can return to the first party
   by flashing the switchhook and
   dialing 6 again.
TRANSFER
OR 
						

							Station Features and Operation (PT/SLT)
218User Manual
Features Guide References
1.9 Answering Features
Call Waiting from Central Office
1.12 Conversation Features
External Feature Access
Flash
User Manual References
4.3.35 External Feature Access 
						

							Station Features and Operation (PT/SLT)
User Manual219
4.3.19 Calling Line Identification Presentation (CLIP)
When you make an outside call through an ISDN line, you can let the other party see your pre-
assigned identification number. You can select to show an identification number assigned for 
an ISDN line or your extension. This is one of the ISDN supplementary service.
To select a CLIP number for an outside line
To select a CLIP number for an extension
Conditions
CLIP Numbers for ISDN PRI Lines
When you make an outside call using an ISDN PRI line, one of the following numbers 
(depending on your choice) is displayed on the telephone of the other party as the CLIP 
number.
a)CLIP number assigned to the trunk line
The number stored in Subscriber .
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and dial tone Dial 7111.
1711

CLIP:CO
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and dial tone Dial 7112.
1712

CLIP:EXT 
						

							Station Features and Operation (PT/SLT)
220User Manual
b)CLIP number assigned to the extension line
The number stored in [CLIP Number] Public/Private .
CLIP Number for ISDN BRI Line
When you make an outside call using an ISDN BRI line, the number stored in DN 
 is displayed 
on the telephone of the other party as the CLIP number.
In this case, above operations do not work.
The CLIP number actually displayed on the telephone of the other party may be different 
from the system programmed CLIP number depending on the contract with your ISDN 
Service Provider.
Disabling the CLIP service
You can choose whether to utilize the CLIP service or not before making an outside call 
.
Programming Guide References
1.2 Slot Assignment
1.8 BRI Port Assignment
1.9 PRI Port Assignment
2.3 Numbering Plan
– CLIP
4.2 Trunk Line
– Subscriber
4.3 Extension Line
– [CLIP Number] Public
– [CLIP Number] Private
4.7 ISDN Extension Line
– [CLIP Number] Public
– [CLIP Number] Private
Features Guide References
2.2 ISDN Originating Features
Calling Line Identification Presentation (CLIP)
Calling Line Identification Restriction (CLIR)
User Manual References
4.3.20 Calling Line Identification Restriction (CLIR) / Calling Name Identification 
Restriction (CNIR)