Panasonic Kx Td500 User Manual

							Station Programming
User Manual51
Exiting Station Programming mode
PT
Press PROGRAM.
PROGRAM
To exit the Station Programming mode, press PROGRAM. You are in
the call handling mode.
When the display shows the initial programming mode; 
						

							Station Programming
52User Manual
Confirming the assigned function data
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
—To exit the Station Programming mode: Press [PROGRAM].
— If you wish to change the data, follow the programming procedure explained in this section.
* A programming access number is required to program/confirm the function data by Station 
Programming.
PT
Press HOLD (END). Enter the program access number.
program access numberHOLD
Enter the program access number* as follows.
-  1:Preferred Line Assignment 
- Outgoing
-  2:Preferred Line Assignment 
- Incoming
-  3:Full One-Touch Dialing Assignment 
-  4:Intercom Alert Assignment
-  5:Call Waiting Tone Type Assignment
-  6:Self-Extension Number Confirmation
-  7:Live Call Screening Mode Set†
 
-81:Initial Display Selection
-82:Bilingual Display Selection
- 9:Handset/Headset Selection
-01:Remote Station Look Control (
- Operator / Manager only)
-02:Call Log Lock Control, Incoming (
- Operator / Manager only)
-03:Live Call Screening Password Control (
- Operator / Manager only)
-  #:Station Programming Data Default Set
The display shows the programmed data.

When you press [5], the display shows:
(- The Call Waiting tone is currently programmed to Tone 1.)
The display shows the initial programming mode.
C.W. Tone1
 † Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic
    Voice Processing System (one that supports Digital Proprietary Telephone [DPT] integration; e.g., KX-TVS100). 
						

							Station Programming
User Manual53
Confirming the assigned data on the Flexible button
—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
—To exit Station Programming mode: Press [PROGRAM].
—If you wish to change the data, follow the programming procedure explained in this section.
Clearing the data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit Station Programming mode: Press [PROGRAM].
—The following lists are the buttons and programming access numbers used for Station 
Programming. Detailed operating instructions are explained on each page in this section.
The display shows the initial programming mode. The display shows the current status.
PT
Press HOLD (END). Press the desired Flexible
(CO,DSS,PF) button.
HOLD
PT
Press the desired Flexible
(CO, DSS, PF) button that
you wish to cancel the
assignment.  Dial 2.Press STORE.
AUTO DIAL
STORE2
The STORE indicator lights.
The display shows the initial programming mode. 
						

							Station Programming
54User Manual
Station Programming Outline [Flexible Button Assignment]
(Station Programming)
Direct Station Selection (DSS) Button
One-Touch Dialing Button
Message Waiting (MESSAGE) Button
FWD/DND Button
SAVE Button
Account Button
Conference (CONF) Button
Log-In / Log-Out Button
Phantom Button
Day / Night Button
Primary Directory Number (PDN) Button
Secondary Directory Number (SDN) Button
Alarm Button
Tone Through Button
Voice Mail (VM) Transfer Button
Two-Way Record Button
* 
Two-Way Transfer Button*
Live Call Screening (LCS) Button*
Live Call Screening (LCS) Cancel Button* 
Answer Button
Release Button
Single-CO (S-CO) Button
Loop-CO (L-CO) Button
Group-CO (G-CO) Button
(Ringing Tone Selection for CO Button)
(Ringing Tone Selection for ICM Button)
(PDN/SDN Key Delayed Ringing Assignment)
(Phantom Button Ringing On/Off Assignment)
(Station Speed Dialing Number / Name Assignment)
[KX-T7235 / KX-T7436 only]
(Exit)
1
2
3
4
5
6
70
71
72
8
77
90
91
92
93
0
#
PROGRAM99
CO
DSS
PF
COCO
73
74
75
78
Group Log-In / Log-Out Button 79
94
95
PDN
Phantom
(F1 - F10)
Phantom
/SDN
Function
PROGRAM
ICMICM
76
* : Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic
    Voice Processing System (one that supports Digital Proprietary Telephone [DPT] integration; e.g., KX-TVS100).
Alert Button97
Group FWD Button98 
						

							Station Programming
User Manual55
Note
Please refer to Flexible Buttons in Section 1.1.4 Feature Buttons for 
applicability of CO / DSS / PF buttons.
[Function Assignment]
(Preferred Line Assignment - Outgoing)
(Preferred Line Assignment 
- Incoming)
(Full One-Touch Dialing Assignment)
(Intercom Alert Assignment)
(Call Waiting Tone Type Assignment)
(Self-Extension Number Confirmation)
(Live Call Screening Mode Set)†
(Initial Display Selection)
(Bilingual Display Selection)
(Handset / Headset Selection)
(Remote Station Lock Control)
- see Operator / Manager Service Features (Section 4.4)
(Control of Call Log Incoming, Log Lock)
- see Operator / Manager Service Features (Section 4.4)
(Live Call Screening Password Control)†
- see Operator / Manager Service Features (Section 4.4)
 
(Station Programming Data Default Set)
(Exit)
1
3
4
5
6
7
0
0
0
#
1
3
2
2
PROGRAM
(Station Speed Dialing Number / Name Assignment)
81
82
9
PROGRAM99
 † Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic
    Voice Processing System (one that supports Digital Proprietary Telephone [DPT] integration; e.g., KX-TVS100). 
						

							Station Programming
56User Manual
2.2 Station Programming
2.2.1 Bilingual Display Selection
Allows you to select the display in English or French.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The default is English display mode.
PT
Dial 82.Press STORE. Dial 1 or 2.
1 : for the English display
2 : for the French display
AUTO DIAL
STORE
or1282
The STORE indicator lights.
The display shows the current display type.
The display shows the initial programming mode. 
						

							Station Programming
User Manual57
2.2.2 Call Waiting Tone Type Assignment
Allows you to select the call waiting tone type (Tone 1 or Tone 2).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
The tone type patterns are described in Section 6 Appendix.
The default is Tone 1.
PT
Dial 5.Press STORE.
or
Dial 1 or 2.
1 : to select Call Waiting Tone 1
2 : to select Call Waiting Tone 2
AUTO DIAL
STORE512
The STORE indicator lights.
The display shows the initial programming mode. The display shows the current tone type. 
						

							Station Programming
58User Manual
2.2.3 Flexible Button Assignment
Each Flexible (CO,DSS,PF) button on your PT and DSS Console can be assigned as various 
feature buttons such as an Account Button, FWD/DND Button, etc. The features assignable are 
limited by the button type. Please refer to Flexible Buttons in Section 1.1.4 Feature 
Buttons. The Flexible CO Button Assignment by User or System Programming can be used 
for this assignment.
Account Button (Assignment)
Allows you to assign a Flexible (CO, DSS, PF) button as an Account button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
PT
Press the desired Flexible (CO, DSS,
PF) button you wish to assign as the
Account button.Dial 6.Press STORE.
AUTO DIAL
STORE6
The STORE indicator lights.
The display shows the initial programming mode. 
Account 
						

							Station Programming
User Manual59
Alarm Button (Assignment)
Allows you to assign a Flexible (CO) button as an Alarm button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
Alarm button is available for the Manager only.
PT
Press the desired Flexible (CO) 
button you wish to assign as the
Alarm button.Dial 77.
(CO)
Press STORE.
AUTO DIAL
STORE77
The STORE indicator lights.
The display shows the initial programming mode. 
ALARM 
						

							Station Programming
60User Manual
Alert Button (Assignment)
Allows you to assign a Flexible (CO) button as an Alert button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
PT
Press the desired Flexible (CO) 
button you wish to assign as the
Alert button.Dial 97.
(CO)
Press STORE.
AUTO DIAL
STORE97
The STORE indicator lights.
The display shows the initial programming mode. 
ALERT