Panasonic Kx Td500 User Manual

							Appendix
User Manual541
Extrnl Page 1 RECH. EXT. 1Access to Paging — External (- to a specific 
external pager).
FWD(ALL) Ext1234 RNV(TOUS)PST1234Complete to set Call Forwarding — All 
Calls.
Confirm key programming on the FWD/DND 
button.
FWD(B/NA)Ext1000 RNV(O/SR)PST1000Complete to set Call Forwarding — Busy/
No Answer.
Confirm key programming on the FWD/DND 
button.
FWD(BSY) Ext2345 RNV(OCC) PST2345Complete to set Call Forwarding — Busy.
Confirm key programming on the FWD/DND 
button.
FWD(CO) 91201431 RNV(LR) 91201431Complete to set Call Forwarding — to 
Outside Line.
Confirm key programming on the FWD/DND 
button.
FWD(From)Ext1234 RNV(DE)  PST1234Complete to set Call Forwarding — Follow 
Me.
FWD(NA) Ext3456 RNV(SR) PST3456Complete to set Call Forwarding — No 
Answer.
Confirm key programming on the FWD/DND 
button.
FWD(NACO) 91234 RNV(SRLR) 91234Complete to set Call Forwarding — No 
Answer to Outside Line.
Confirm key programming on the FWD/DND 
button.
FWD Cancel E1234 ANNUL. RNV P1234Cancel Call Forwarding — Follow Me (All 
Calls) at another extension.
FWD/DND Cancel ANNULER RNV/NPDCancel Call Forwarding or Do Not Disturb 
(DND).
Gone Home Gone HomeAbsent Message 2.
Group Page 01 RECHERCHE GR 01Access to Paging — Group (- to a particular 
paging group).
Group Page All RECH. GR - TOUSAccess to Paging — Group (- to all paging 
groups).
Handset: ** COMBINE : **Volume Control — handset on handset mode.
Headset: ** CASQUE: **Volume Control — headset on headset mode. English Display French Display Description 
						

							Appendix
542User Manual
In a Meeting In a MeetingAbsent Message 6.
Locked NO. : 123 CODE VERR. : 123Complete to set Electronic Station Lockout.
Log Locked :123 REG FERME : 123Complete to set Call Log Lock, Incoming.
Message Cancel MESSAGE ANNULECancel Absent Message.
MODEM command 1 COMMANDE MODEM 1Complete to send an AT Command to the 
external modem.
— External Modem Control
MW at Ext 1234 MESS. PST 1234Complete to set Message Waiting.
MW Not Accepted MESS ATT. REFUSENot complete to set Message Waiting.
MW Cancel:E1234 MESS ANNUL:P1234Cancel Message Waiting of desired 
extension.
MW Cancelled MESS ATT. ANNULECancel ones own Message Waiting.
Night Mode SERVICE DE NUITNight mode status. (Cancel Day mode.)
— Night Service
No Held Call AUCUN APPEL ATT.There is no held call when retrieving call on 
hold or parked call.
No Incoming Call AUCUN APPEL ENT.There is no incoming call when trying to pick 
up the call.
Not Valid NON VALIDEIllegal operation.
OGM 1 Play:28 REP 1  LECT:28When playing back the OGM. 
OGM 1  Rec.:12 REP 1   ENP:12When recording the OGM.
Out Until 12/12 Out Until 12/12Absent Message 5.
Paging Deny Off APPEN GEN. NONCancel Paging — DENY.
Paging Deny On APPEN GEN. OUIComplete to set Paging — DENY.
Parallel Off PARALLELE : NONCancel Paralleled Telephone Connection.
Parallel On PARALLELE:OUIComplete to set Paralleled Telephone 
Connection.
Park at 00 N/A ATT. A 00N.VALNot complete to set Call Park.
PT-PGM Mode TP-MODE PROGEntered the Station Programming mode.
RCL:Tony Viola RAPL:Tony ViolaCalled by transfer recall, with name. — Call 
Transfer
RCL:Ext 1234 RAPL:PST 1234Called by transfer recall, without name.
— Call Transfer
Restricted RESTREINTAn outgoing call is restricted. English Display French Display Description 
						

							Appendix
User Manual543
Ringer : *** SONN. : ***Volume Control — ringer on idle status.
SP:************ HP:************Volume Control — speaker on hands-free 
mode.
Transfer to CO TRANSFERT A LRThe destination extension is set Call 
Forwarding — to Outside Line.
Try Again RESSAYERWhen the destination extension is in one of 
the following states.
 — Off-hook, incoming call
 — Call Hold
 — All buttons on PT are in use
Unlocked DEVERROUILLECancel Call Log Lock, Incoming.
Cancel Electronic Station Lockout.
Will Return Soon Will Return SoonAbsent Message 1.
*1Provides you with a callers information, such as his name and telephone number, on the CO line assigned to receive Caller 
ID service calls. This requires a subscription for caller identification services. For more details, please consult with your 
dealer.
English Display French Display Description 
						

							Appendix
544User Manual
Examples – in Station Programming mode
English Display French Display Description
Account COMPTEAccount button is assigned.
C.W. Tone1 TON.APPEL1Select Call Waiting tone.
Clear Ready? ANNULER DONNEES?Available to clear Station Programming data.
CO-10101 LR-10101Single-CO (S-CO) button is assigned.
Conference CONFERENCEConference (CONF) button is assigned.
1400:CO Lock 1400:LR VERR.Complete to lock the outside calls of other 
extension.
— Remote Station Lock Control.
1400:ICM Lock 1400:INTCM VERR.Complete to lock the intercom calls of other 
extension.
— Remote Station Lock Control.
1400:Unlock 1400:DEVERR.Cancel Remote Station Lock Control
Ext-1234 PST-1234DSS button is assigned.
FWD/DND RNV/NPDFWD/DND button is assigned.
Hands-free:Off MAINS LIB.:NONDisable Full One-Touch Dialing mode.
Hands-free:On MAINS LIB.:OUIEnable Full One-Touch Dialing mode.
Handset COMBINESelect Handset mode.
Headset CASQUESelect Headset mode.
10101 EXT1001 10101  PST1001Confirm jack number and extension number.
Loop-CO BOUCLE DE LRLoop-CO (L-CO) button is assigned.
Message Waiting MESS. EN ATTENTEMessage Waiting (Owner Extension) button 
is assigned.
MW-1234 MW-1234Message Waiting (Another Extension/
Phantom Extension) button is assigned.
DAY/NIGNT JOUR/NUITDay/Night button is assigned.
Not Stored NON MEMORISENo programming is assigned.
Pref.In :CO-02 ENT.PREF:LR-02Select Prime Line (Outside Line) Preference 
— Incoming.
Pref.In :No ENT.PREF:NONSelect No Line Preference — Incoming.
Pref.In :Ring ENT.PREF:SONNSelect Ring Line Preference — Incoming.
Pref.Out:CO-02 SOR.PREF:LR-02Select Prime Line (Outside Line) Preference 
— Outgoing. 
						

							Appendix
User Manual545
Conditions
If the displayed characters exceed 16 digits, & is shown at the right-hand edge.
The duration time display is only shown when you make or receive an outside call. Count 
start time for outgoing calls can be programmed as desired.
When you confirm key programming, be sure to press a button while on-hook. If the Full 
One-Touch Dialing feature is set, dialing mode will start when pressing PF (Programmable 
Feature), DSS (Direct Station Selection), SAVE or REDIAL button. Pref.Out:ICM SOR.PREF:INTCMSelect Prime Line (INTERCOM) Preference 
— Outgoing.
Pref.Out:Idle SOR.PREF:LIB.Select Idle Line Preference — Outgoing.
Pref.Out:No SOR.PREF:NONSelect No Line Preference — Outgoing.
Save SAUVEGARDESAVE button is assigned.
Tone Call APPEL-TON.Select Ring-Calling mode.
Tone Type-2 TON. TYPE-2Select ringing tone for a CO button or 
intercom calls.
TRK GRP-03 GR LR  -03Group-CO (G-CO) button is assigned.
VTR-1010 TMV-1010Voice Mail (VM) Transfer button is assigned.
Voice Call APPEL VOCALSelect Voice-Calling mode.
092-555-2111 092-555-2111One-Touch Dialing button is assigned. Examples – in Station Programming mode
English Display French Display Description 
						

							Appendix
546User Manual
6.1.2 Feature Numbers List
Numbers listed below are the initial factory settings (default value). There are flexible feature 
numbers and fixed feature numbers. The flexible feature numbers can be changed by System 
Programming .
Flexible Feature Numbers
Feature Default Additional Digits
1st hundred block extension 10 00-99
2nd hundred block extension 11 00-99
3rd hundred block extension 12 00-99
4th hundred block extension 13 00-99
5th hundred block extension 14 00-99
6th hundred block extension 20 00-99
7th hundred block extension 21 00-99
8th hundred block extension 22 00-99
9th hundred block extension 23 00-99
10th hundred block extension 24 00-99
11th through 16th hundred block extension—00-99
Absent Message set/cancel 750 1-9 / 0
Account Code Entry 49 Account code + #(99)
Automatic Callback Busy (Camp-On) cancel 46
Background Music (BGM) — External on/off 35
Call Forwarding — set/cancel 710
2-6,  / 0
Call Forwarding — Follow Me set/cancel 710 7/8 + your extension no.
Call Hold 50
Call Hold, Retrieve outside call 53 trunk port physical no.
Call Hold, Retrieve intercom call 51 extension no.
Call Log Incoming, Overwrite Mode set/
cancel56 1 / 0
Call Log Incoming, Log lock 57 000-999 twice
Call Log Incoming, Log Unlock 57 000-999 (same lock code)
Call Park/Call Park Retrieve 52 00-99
Call Pickup, CO Line
4
Call Pickup, Directed 41 extension no. 
						

							Appendix
User Manual547
Call Pickup, Group 40
Call Pickup Deny set/cancel 720 1 / 0
Call Waiting set/cancel 731 1, 2, 3 / 0
Calling Line Identification Presentation 
(CLIP)711 1 / 2
Calling Line Identification Restriction (CLIR)/
Calling Name Identification Restriction 
(CNIR)59 0 / 1 / 2
Data Line Security set/cancel 730 1 / 0
Dial Information (CTI)—code + # / 99
Do Not Disturb (DND) set/cancel 710 1 / 0
Doorphone Call calling 31 1-8
Doorphone Call door open 55 1-8
Electronic Station Lockout set 762 000-999 twice
Electronic Station Lockout cancel 762 000-999
Executive Busy Override Deny set/cancel 733 1 / 0
External Feature Access 6
External Modem Control 791 1-5
Group Login / Logout 48
(1-0)+   / incoming group 
Group  FWD 714 (1-0) + source incoming group + destination 
incoming / extension group
Live Call Screening (LCS) Password set 799 000-999 twice
Live Call Screening (LCS) Password cancel 799 000-999
Log-In/Log-Out 45 1 / 0
Message Waiting set/cancel 70 1+extension no. / 0+extension no.
Message Waiting call back 70 2
Night Service set/cancel 78 0-4
Operator Call 0
Other PBX 01-16—00-99
Outgoing Message (OGM) recording/playback 36 1  / 2+1-8
Outward Dialing — Local Access/ARS 9
Outward Dialing — Trunk Group Access 8 01-48Flexible Feature Numbers
Feature Default Additional Digits 
						

							Appendix
548User Manual
Paging — All 32 / 33
Paging — External 32 0 / 1-2
Paging — External Answer/TAFAS Answer  42 1 / 2
Paging — Group  33 01-16
Paging — Group Answer 43
Paging Deny set/cancel 721 1 / 0
Paralleled Telephone Connection set/cancel 39 1 / 0
Pickup Dialing (Hot Line) assign/set/cancel 74 2+phone no. +# / 1 / 0
Quick Dial 1-8—
Redial, Last Number #
Remote DND (Do Not Disturb) set/cancel 722 destination extension no.
Remote FWD (Call Forwarding) Cancel-Once 723 destination extension no.
Station Program clear 790
Station Speed Dialing
30-9
Station Speed Dialing programming 30 (0-9)+phone no. +#
Switching COS, Primary 792
Switching COS, Secondary 793
System Speed Dialing (for SLT) 000-999 (system speed dial number)
TIE Line Access 77
Timed Reminder set 761 1+hhmm*
1 +(0 / 1)+(0 / 1)
Timed Reminder cancel/confirm 761 0 / 2
Timed Reminder, Remote set
71+extension no. +hhmm*
1+(0 / 1)+(0 / 1)
Timed Reminder, Remote cancel/confirm
70+extension no. / 2+extension no.
Trunk Busy-out set/cancel 726 (1 / 0)+trunk port physical no.
Trunk Busy-out confirm 726 2+trunk port physical no.
Trunk Route control 724 trunk port physical no.
UCD Monitor mode set/cancel 725
FDN / 
Walking COS set 47 Walking COS password+your extension no.
Walking Station start 727 1
Walking Station end 727 0+source extension no.Flexible Feature Numbers
Feature Default Additional Digits 
						

							Appendix
User Manual549
Conditions
Extension numbers can be three or four digits in length. Any number can be set as the 
leading first or second digit.
Flexible feature numbers can only be dialed while a dial tone is heard.
If   or # is included in a feature number, it will not be possible for users with dial pulse 
(DP) telephones to access the feature.
Feature Number Conflicts 
Examples: 1 and 11, 0 and 00, 2 and 21, 10 and 101, 32 and 321, etc.
Additional Digits
Some flexible feature numbers require additional digits to make the feature active. For  *
1hhmm hh: hour(01-12) mm: minute(00-59)
Fixed Feature Numbers
Feature Type-1 
(Default)Ty p e - 2
While a busy tone is heard:
Automatic Callback Busy
Busy Station Signaling (BSS) / Off-Hook Call
Announcement (OHCA) / Whisper OHCA
Executive Busy Override6
1
26
2
3
While a Do Not Disturb tone is heard:
Do Not Disturb Override 1 2
While calling or talking:
Account Code Delimiter
Alternate Calling - Ring / Voice
Conference
Door Open
Pulse to Tone Conversion# / 99
3
5
 ## / 99
3
5
 #
When the extension is on-hook:
Background Music (BGM) on / off
Day / Night mode display
Time display / Self-Extension Number display 
switching1
#HOLD / TRANSFER
#
When a CO call is arriving (Receiving the 
Caller ID information):
Switching CO Line Name / Caller ID Number / 
Caller ID Name   
						

							Appendix
550User Manual
example, to set Call Waiting, the feature number for Call Waiting must be followed by 1 
and to cancel it, the same feature number should be followed by 0.
Fixed Feature Numbers Type-1 or Type-2 can be selected by System Programming. 
(Default = Type-1)
Programming Guide References
1.4 Extension Port Assignment
– Attribute
– DN
2.3 Numbering Plan
2.8 System Option
– Fixed Feature Number
Features Guide References
1.3 System Features
Flexible Numbering
User Manual References
None