Panasonic Kx Td500 User Manual
Have a look at the manual Panasonic Kx Td500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix User Manual551 6.1.3 Tone List 1 s Confirmation Tone 1 Confirmation Tone 2 Confirmation Tone 3 Confirmation Tone 4 Dial Tone 1 Dial Tone 2 Dial Tone 4 Busy Tone Ringback Tone 1 Ringback Tone 2 Do Not Disturb (DND) Tone Reorder Tone Dial Tone 3 CO-CO Line Call Limit Warning Tone
Appendix 552User Manual Hold Alarm Tone 15 s Call Waiting Tone 1 (outside/intercom) 1 s Outside Calls / Outside Call Hold Recall Intercom Calls / Intercom Call Hold Recall Doorphone Calls / Timed Reminder Callback Ringing (Camp-on Recall) 5 s Call Waiting Tone 2 (outside) Call Waiting Tone 2 (intercom) 15 s
Appendix User Manual553 6.1.4 Troubleshooting If a power failure should occur... Your KX-TD500 System enables conversations between specific CO lines and extensions (Power Failure Transfer), and supports system data backup. Power Failure Transfer Specific extensions are automatically connected straight to specific CO lines. This provides CO line conversations between the pre-assigned extensions and CO lines: All other conversations are disconnected during a power failure. Digital Proprietary Telephones (DPTs) cannot be used during a power failure. SLTs can work in the event of a power failure. When power is restored after a power failure, your system automatically re-starts operation, maintaining as much of the previous system data as possible. Problem Probable Cause Possible Solution Nothing is heard in the hands- free mode.The Headset mode is selected.When the headset is not used, set the mode to Handset. Refer to Handset/Headset Selection in Station Programming (Section 2), or DPT Overview (Section 1). The unit does not ring.The CO button is not assigned. The Ringer Volume is set to OFF.Assign the CO button. Increase the Ringer Volume. Refer to DPT Overview (Section 1). The display flashes the following message:The system internal clock does not work properly.Consult with an authorized Panasonic Factory Service Center. THU JAN01 12:00A
Panasonic Consumer Electronics Company Division of Matsushita Electric Corporation of America Printed in JapanPSQX1495SA 2000 Panasonic Communications Co., Ltd. All Rights Reserved. KK0899MN6113 (M) Copyright: This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC). You may print out this manual solely for internal use with this model. Except above, you may not reproduce this manual in any form, in whole or part, without the prior written consent of PCC and its licensee. Panasonic Sales Company Division of Matsushita Electric of Puerto Rico, Inc. One Panasonic Way Secaucus, NJ 07094 Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 http://www.panasonic.com/csd