Panasonic Kx Td500 User Manual

							Station Features and Operation (PT/SLT)
User Manual411
4.4.3 Call Log Incoming, Log Lock 
The Manager and the Operators can cancel the Call Log Incoming, Log Lock feature set at 
any other extension.
Programming
Conditions
If the extension user forgets his pre-set password, he can ask the Manager or an Operator to 
clear the password.
User Manual References
4.5.5 Call Log Incoming, Log Lock (KX-T7436 / KX-T7433 / KX-T7235 / KX-T7230 
only)
PT
You are in the Station 
Programming mode:


PT—PGM Mode

EXT NO?
1234:Unlock?
Press PROGRAM.
Press PROGRAM to exit
the Station Programming mode.  Dial 99. Dial 02.Press STORE. Dial the extension number
(3 or 4 digits) or    .
- extension number: to clear one extension-                        : to clear all extensions
extension no. or
AUTO DIAL
STORE9902
PROGRAM
PROGRAM
The STORE indicator lights. 
						

							Station Features and Operation (PT/SLT)
412User Manual
4.4.4 Live Call Screening (LCS) Password Clear*1
The Manager and the Operators can clear the Live Call Screening password of any extension.
Programming
Conditions
If the extension users forget their pre-set password, they can ask the Manager or an Operator 
to clear the password.
User Manual References
 4.3.43 Live Call Screening (LCS)
*1Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic Voice 
Processing System (one that supports Digital Proprietary Telephone [DPT] integration; e.g., KX-TVS100).
PT
You are in the Station
Programming mode:


PT—PGM Mode

EXT NO?
1234:Cancel?
Press PROGRAM.
Dial 99. Dial 03.
Press STORE.
extension no. or
Dial the extension number
(3 or 4 digits) or    .
- extension number: to clear one extension-                        : to clear all extensions
AUTO DIAL
STORE
9903PROGRAM
The STORE indicator lights. 
						

							Station Features and Operation (PT/SLT)
User Manual413
4.4.5 Local Alarm
If a system error is detected during on-line communication mode, the Alarm light on the 
Manager extension turns red. The Manager can confirm the error message by pressing the red 
lit Alarm button.
If a major error occurs, minor errors will be neglected and only the first major error message 
will be displayed. The second error will be neglected, if the error priority is the same as the first 
one. Please refer to Section 5 Troubleshooting in the Installation Manual for further 
information on error messages.
Error Message List (Priority order)
Error Message Description Priority Alarm LED
ERR CLCK ICCalendar IC failure  1 A
ERR DC DOWNDC power down 1 B
B/S FAN FLT!Basic shelf fan alarm 1 E
E/S1 FAN FLT!Expansion shelf 1 fan alarm 1 E
E/S2 FAN FLT!Expansion shelf 2 fan alarm 1 E
B/S OVER HEAT!Basic shelf heat alarm 1 E
E/S1 OVER HEAT!Expansion shelf 1 heat alarm 1 E
E/S2 OVER HEAT!Expansion shelf 2 heat alarm 1 E
ERR TSW DWNTSW clock down 1 B
ERR BAT ALMCPU RAM battery alarm 1 A
ERR AC DOWNAC power down 2 B
ERR xyy CRD ERROption Card failure 2 A
ERR xyy DISCNCTCard disconnect 2 B
ERR xyy DTR AISDigital trunk AIS reception 2 D
*1
ERR xyy DTR FRMDigital trunk frame failure 2 D*1
ERR xyy DTR RAIDigital trunk RAI reception 2 D*1
ERR xyy DTR SYCDigital trunk out of 
synchronization2D*1
ERR xyy LPR RAMOption Card RAM failure 2 A
ERR xyy LPR ROMOption Card ROM failure 2 A
ERR xyyz  MODEMModem failure 2 A
ERR xyy OGM LOSDISA OGM is lost 2 C
ERR xyy OPX POWOPX power failure 2 C
ERR SMDRPrinter is not connected 2 B 
						

							Station Features and Operation (PT/SLT)
414User Manual
[Legend]
Error Message
Priority
Alarm LED
(When a problem occurs)
The Alarm light turns red automatically. The corresponding error message is shown on the 
display PT, if it is idle, by pressing the red lit Alarm button.
If the red lit Alarm button is pressed again, whether the problem is solved or not, the Alarm 
light goes off and the display PT shows the initial display (Date and Time or Self-
Extension number).
The Alarm light turns red and the corresponding error message is shown on the display PT 
automatically, if it is idle. This situation continues until the problem will be solved.
(When the problem is solved) ERR xyy DSP1LNKDSP-1 link failure 2 D
*1
ERR xyy CD FLTCard status fault 2 A
*1Regarding the T1 card, please refer to Reference Guide for T1 Digital Trunk card.
x: Shelf Number (1-3)
yy: Slot Number (01-14)
z: Error Number
1: Major Error
2: Minor Error
A: LED on PT / Top Shelf / Card...........................OFF   ON
B: LED on PT / Top Shelf............................OFF   ON
C: LED on PT.............................OFF   ON
D: LED on PT / Card.............................OFF   ON
E: LED on PT / Top Shelf...........................OFF   ON
A/B/C/D: LED on PT..............................................ON (no change)
LED on Top Shelf / Card...................................ON   OFF
E: LED on PT / Top Shelf.............................ON   OFFError Message List (Priority order)
Error Message Description Priority Alarm LED 
						

							Station Features and Operation (PT/SLT)
User Manual415
When the problem is solved, the Alarm light goes off and the display PT shows the initial 
display.
Displaying an error message
Clearing the error message
Conditions
Alarm button assignment
Alarm button can be assigned to a flexible CO button on PT by Station, User or System 
Programming.
Alarm LED indication
Major alarm (Priority 1) – Red moderate flash
Minor alarm (Priority 2) – Red On
If multiple errors occur at a time, only the error with highest priority will be displayed by 
pressing the red lit Alarm button.
PT
Press the red lit Alarm 
(flexible button).
When the Alarm button turns red;

ERR 20211DISCNCT
(Alarm)
PT
Press the red lit Alarm
(flexible button).
(Alarm)
While the error message is displayed;

Date and Time display
WED JAN 1 10:40A 
						

							Station Features and Operation (PT/SLT)
416User Manual
Programming Guide References
4.3 Extension Line
– CO Key
Features Guide References
1.4 Fault Recovery/Diagnostics
Local Alarm
User Manual References
2.2.3 Flexible Button Assignment
3.2.5 [005] Flexible CO Button Assignment 
						

							Station Features and Operation (PT/SLT)
User Manual417
4.4.6 Outgoing Message (OGM) Record/Playback
The Manager and the Operators can record and play back outgoing voice messages.
Recording a message
7235 / 7436
Lift the handset or
press SP-PHONE.
Record a message
(up to 30 seconds).
OGM Group no.
Enter OGM Group
number (1 through 8).
AUTO DIAL
STORE
Press STOREor wait until a
maximum recording time (30
seconds) has elapsed.
Press 
Features.
Confirmation tone 
AUTO DIAL
STORE
Press STOREor wait until
playback is finished. Confirmation tone Hang up or press
SP-PHONE. Confirmation tone
and dial tone 
FeaturesNEXT
OROGM Recording(→1-8)
The recording is stopped and STORE
indicator light turns steady red.
The recorded message will be played
back automatically.

Time counter
(seconds)
OGM group
number selected
(1 through 8)
The STORE indicator light flashes red slowly.
Recording starts after the confirmation tone.
OGM 2    Rec.:00
OGM 2    Play:28
The STORE indicator light turns off.
Rotate Jog Dialor press
NEXT until the following is
displayed.Press OGM Recording.  
						

							Station Features and Operation (PT/SLT)
418User Manual
Recording a message
Lift the handset or
press SP-PHONE.
Record a message
(up to 30 seconds).
OGM Group no.
Enter OGM Group
number (1 through 8).
AUTO DIAL
STORE
Press STOREor wait until a
maximum recording time (30
seconds) has elapsed.
Press MODEuntil
Feature Accessis
displayed.
Confirmation tone 
AUTO DIAL
STORE
Press STOREor wait until
playback is finished. Confirmation tone Hang up or press
SP-PHONE.
OGM Record 1-8→SELECT
MODE
The recording is stopped and STORE
indicator light turns steady red.
The recorded message will be played
back automatically.

Time counter
(seconds)
OGM group
number selected
(1 through 8)
The STORE indicator light flashes red slowly.
Recording starts after the confirmation tone.
OGM 2  Rec.:00
OGM 2  Play:28
The STORE indicator light turns off.
Rotate Jog Dialuntil
OGM Record is
displayed.Press SELECT.
7431
MODE
Confirmation tone
and dial tone  
						

							Station Features and Operation (PT/SLT)
User Manual419
Recording a message
Lift the handset or
press SP-PHONE.
Record a message
(up to 30 seconds).
OGM Group no.
Enter OGM Group
number (1 through 8).
AUTO DIAL
STORE
Press STOREor wait until a
maximum recording time (30
seconds) has elapsed. Confirmation tone 
AUTO DIAL
STORE
Press STOREor wait until
playback is finished. Confirmation tone Hang up or press
SP-PHONE.
The recording is stopped and STORE
indicator light turns steady red.
The recorded message will be played
back automatically.

Time counter
(seconds)
OGM group
number selected
(1 through 8)
The STORE indicator light flashes red slowly.
Recording starts after the confirmation tone.
OGM 2    Rec.:00
OGM 2    Play:28
The STORE indicator light turns off.
Press SHIFTuntil
FEATis
displayed.Press FEAT.
Rotate Jog Dialuntil
OGM Record is at the
arrow.Press SEL.
SHIFTFEAT
OGM Record   1-8
Page Deny    1/0
MENU →
SEL
         7433
Confirmation tone
and dial tone  
						

							Station Features and Operation (PT/SLT)
420User Manual
Recording a message
Lift the handset or pressSP-PHONE/MONITOR.Enter OGM Group
number (1 through 8).Record a message
(up to 30 seconds).
Press STORE or wait until
a maximum recording time
(30 seconds) has elapsed.Confirmation
tone
Confirmation 
tone
Press STORE or wait until 
playback is finished
Dial 361.
OGM Group no.
Hang up or press
SP-PHONE/MONITOR.
361
AUTO DIAL
STORE
AUTO DIAL
STORE

Time counter
(seconds)
OGM group
number selected
(1 through 8)
The STORE indicator light flashes red slowly.
Recording starts after the confirmation tone.
OGM 2  Rec.:00
The recording is stopped and STORE indicator light turns steady red.
The recorded message will be played back automatically.

The STORE indicator light turns off.
OGM 2  Play:28
PT and SLT
Confirmation tone
and dial tone