Panasonic Kx Td500 User Manual

							Station Features and Operation (PT/SLT)
User Manual331
[Idle]
Automatic Route Selection (ARS)
Trunk Access, Idle functions when Automatic Route Selection (ARS) is not activated. If 
ARS is activated by System Programming , the least expensive route for the destination is 
selected automatically.
Local Hunt Sequence
An idle CO line is selected from the Trunk Group assigned to the extension, If multiple 
Trunk Groups are available, the Trunk Group hunting sequence is determined by System 
Programming .
For ICM type PT only
Dialing the CO line access code (default=9) selects a CO button on a PT according to the 
priority as follows:
S-CO > G-CO > L-CO on a hunted Trunk Group
[Direct]
By pressing an idle CO button, the hands-free operation mode is established and you can 
perform On-Hook Dialing. There is no need to press the SP-PHONE button, MONITOR 
button or lift the handset.
[Individual Trunk]
ARS Override
If Automatic Route Selection (ARS) is activated, it is overridden by an outgoing call made 
by pressing the S-CO button.
[Trunk Group]
Line Hunting Order
An idle CO line in a Trunk Group is selected in one of the following three line hunting 
orders: Normal, Reverse (default), Sequential.
This is determined by System Programming .
Programming Guide References
2.2 Tenant
– Automatic Route Selection
2.3 Numbering Plan
– Local CO Line Access / ARS
– Trunk Group Access
2.4 Class of Service (COS)
– Trunk Group Setting
2.6 Local Hunt Sequence 
						

							Station Features and Operation (PT/SLT)
332User Manual
3.2 Trunk Group
– Line Hunting Order
4.3 Extension Line
– CO Key
– [Preferred Line] Outgoing
Features Guide References
1.3 System Features
Account Code Entry
Remote Station Lock Control
Trunk Group
1.6 Originating Features
Automatic Callback Busy (Camp-On)
Automatic Route Selection (ARS)
Electronic Station Lockout
Line Preference—Outgoing (Idle Line/No Line/Prime Line)
Toll Restriction
Trunk Access
Trunk Connection Assignment—Outgoing
1.16 Button Features
Button, Line Access
User Manual References
2.2.3 Flexible Button Assignment
2.2.12 Preferred Line Assignment — Outgoing
3.2.5 [005] Flexible CO Button Assignment 
						

							Station Features and Operation (PT/SLT)
User Manual333
4.3.55 Paging
Allows you to make a voice announcement to a lot of people in the office simultaneously. Your 
message is announced through built-in speakers of Proprietary Telephones (PTs) or external 
speakers (External Pagers) or both. The paged person can answer your paging announcement 
from any telephone in the office (Paging Answer). Making and answering a paging 
announcement is possible either from a PT or SLT. You can also make a paging announcement 
while putting a call on consultation hold in order to transfer it (Paging and Transfer). There 
are three types of paging as shown below. You can select the appropriate type according to your 
needs.
Allows the PT user to deny receiving a paging announcement through built-in speaker of his 
own PT (Paging Deny).
Paging – All: To access all external pagers and paging groups
Type Description
Paging — All Paging through both built-in speakers of PTs and external 
pagers simultaneously.
Paging — ExternalPaging through all external pagers simultaneously.
Paging through a specific external pager.
Paging — GroupPaging to all paging groups through built-in speakers of 
PTs.
Paging to a particular paging group through built-in 
speakers of PTs.
Confirmation tone
(Optional) Lift the handset
or press
SP-PHONE/MONITOR.Announce. Wait for
an answer.Dial 32   .Talk.
32

You may dial 33  instead.
All Call Page PT and SLT 
						

							Station Features and Operation (PT/SLT)
334User Manual
Paging – External: To access all external pagers
Paging – External: To access a particular pager
Paging – Group: To access all paging groups (01-16) simultaneously
Confirmation tone
(optional) Lift the handset or press 
SP-PHONE/MONITOR.Announce. Wait for
an answer.Dial 320.Talk.
320

Extrnl Page All PT and SLT
Confirmation tone 
(optional) Lift the handset or press
SP-PHONE/MONITOR.Announce. Wait for
an answer.Dial 32.Talk.Dial external pager 
number (1 or 2).
external pager no.32

Extrnl Page X
external pager number
PT and SLT
Confirmation tone
(optional) Lift the handset or press
SP-PHONE/MONITOR.Announce. Wait for an answer.Dial 33#.Talk.
33

Group Page All PT and SLT 
						

							Station Features and Operation (PT/SLT)
User Manual335
Paging – Group: To access a particular paging group
Conditions
[General]
A confirmation tone is sent to extensions, when the paging announcement is made. 
Eliminating the tone is programmable .
A confirmation tone is sent to extensions, when the paging announcement is answered. 
Eliminating the tone is programmable .
With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute Paging 
feature using the display operation.
[All], [External]
An external pager (user-supplied) must be connected to the System beforehand.
Up to two external pagers can be connected to the KX-TD500 System.
External Paging Tone
External paging tone is emitted from external pagers, before the voice announcement. 
Eliminating the tone is programmable .
External Paging Priority
External pagers can be used for TAFAS, Paging – External or Background Music (BGM) – 
External in this order.
For example, if Paging – External is overridden by TAFAS, a reorder tone is returned to the 
performer of Paging – External. If Background Music (BGM) – External is overridden by 
another higher priority, it is interrupted and starts again when the higher priority is finished.
If you hear a busy tone after dialing an external pager access number, the external pager(s) 
you specified is(are) busy.
Confirmation tone
(optional) Lift the handset or press
SP-PHONE/MONITOR.Announce. Wait for
an answer.Dial 33.Talk.Enter the paging group
number (01 through 16).
paging group no.33

paging group number
(01 through 16)
Group Page XX
PT and SLT 
						

							Station Features and Operation (PT/SLT)
336User Manual
[All], [Group]
A maximum of 16 station paging groups, each consisting of one or more extension groups, 
can be created in the System .
A single Extension Group cannot belong to two or more different Paging Groups at a time.
To page extensions, paged extensions must belong to some extension group(s), and this/
these extension group(s) must belong to some paging group(s).
Paging – Group to different paging groups can be performed simultaneously.
Paging – Group feature overrides Do Not Disturb (DND) feature assigned to the paged 
extension.
Installation Manual References
2.8.1 External Pager (Paging Equipment)
Programming Guide References
2.2 Tenant
– External Paging Tone
– Confirmation Tone for Station or External Paging
2.3 Numbering Plan
– External Paging
– Station Paging
2.8 System Option
– Confirmation tone for Call Pickup, Paging, Paging-Answer, TAFAS-Answer, Hold
Retrieve and Call Park Retrieve
3.4 Paging Group
– Paging Group No.
– Extension Group No.
Features Guide Reference
1.3 System Features
Background Music (BGM)—External
1.5 Attended Features
Trunk Answer From Any Station (TAFAS)
1.14 Paging Features
Paging
User Manual Reference
4.3.56 Paging — Answer
4.3.57 Paging Deny 
						

							Station Features and Operation (PT/SLT)
User Manual337
4.3.58 Paging and Transfer
4.3.78 Trunk Answer From Any Station (TAFAS)
4.4.2 Background Music (BGM) — External
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access 
Menu 
						

							Station Features and Operation (PT/SLT)
338User Manual
4.3.56 Paging — Answer
Allows you to answer an announced page at any extension within the system.
Answering a page sent through a built-in speaker
Answering a page sent through a particular external pager
Conditions
Only extensions within the paged group can answer Paging — Group.
A confirmation tone is sent to extensions, when the page is made. Eliminating the tone is 
programmable .
With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature 
using the display operation.
Programming Guide References
2.3 Numbering Plan
– External Paging Answer / TAFAS Answer
– Station Paging Answer
2.8 System Option
– Confirmation tone for Call Pickup, Paging, Paging-Answer, TAFAS-Answer, Hold
Retrieve and Call Park Retrieve
3.4 Paging Group
– Paging Group No.
Confirmation tone
(optional) Lift the handset or press
SP-PHONE/MONITOR.Talk.Dial 43.
43
PT and SLT
Confirmation tone
(optional) Lift the handset or press
SP-PHONE/MONITOR.Talk.Dial 42.Dial external pager number(1 or 2).
external pager no.42
PT and SLT 
						

							Station Features and Operation (PT/SLT)
User Manual339
– Extension Group No.
Features Guide References
1.14 Paging Features
Paging
User Manual References
4.3.55 Paging
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access 
Menu 
						

							Station Features and Operation (PT/SLT)
340User Manual
4.3.57 Paging Deny
Allows you to deny receiving paging announcement through the built-in speakers of your PTs.
Setting
Canceling
Conditions
Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial 
tone (dial tone 2) after going off-hook depending on System Programming .
With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature 
using the display operation.
Programming Guide References
2.3 Numbering Plan
PT
Dial 7211.Lift the handset or press
SP-PHONE/MONITOR.Hang up or press
SP-PHONE/MONITOR. Confirmation tone
and dial tone
1217

Paging Deny On
PT
Dial 7210.Lift the handset or press
SP-PHONE/MONITOR.Hang up or press
SP-PHONE/MONITOR. Confirmation tone
and dial tone
0217

Paging Deny Off