Panasonic Kx Td500 User Manual
Have a look at the manual Panasonic Kx Td500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 126
User Programming
126User Manual
3.2.5 [005] Flexible CO Button Assignment
Description
Used to determine the use of the flexible CO buttons on Proprietary Telephones in the system.
Selection
Extension number: 3 or 4 digits
Button Code (plus parameter, if required):
Button Code Parameter
0 (Single-CO)10101 through 31408 (trunk port physical number)
1 (DSS)3 through 4 digits (Extension number)
2 (One-Touch Dialing)24 digits max. (Telephone number)
3 (Message Waiting) None (Owner Extension) or 3 through 4...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-125.png "Page 126
User Programming
126User Manual
3.2.5 [005] Flexible CO Button Assignment
Description
Used to determine the use of the flexible CO buttons on Proprietary Telephones in the system.
Selection
Extension number: 3 or 4 digits
Button Code (plus parameter, if required):
Button Code Parameter
0 (Single-CO)10101 through 31408 (trunk port physical number)
1 (DSS)3 through 4 digits (Extension number)
2 (One-Touch Dialing)24 digits max. (Telephone number)
3 (Message Waiting) None (Owner Extension) or 3 through 4...")
![Page 131
User Programming
User Manual131
3.2.6 [006] Caller ID Dial Set
Description
Sets the identification code of the calling party (Caller ID Code) to utilize Caller ID Service
provided by a specific central office (CO). If an ID Code transmitted from CO is found in the
Caller ID Code Table, the callers ID Code or a name given to the code in program [007] Caller
ID Name Set is displayed on the telephone, allowing the called party to recognize the caller.
Selection
Location number: 000 through 999
Caller...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-130.png "Page 131
User Programming
User Manual131
3.2.6 [006] Caller ID Dial Set
Description
Sets the identification code of the calling party (Caller ID Code) to utilize Caller ID Service
provided by a specific central office (CO). If an ID Code transmitted from CO is found in the
Caller ID Code Table, the callers ID Code or a name given to the code in program [007] Caller
ID Name Set is displayed on the telephone, allowing the called party to recognize the caller.
Selection
Location number: 000 through 999
Caller...")
![Page 132
User Programming
132User Manual
Programming
Conditions
Up to 1000 Caller ID Codes per tenant, 2000 per system, can be assigned.
Program [007] Caller ID Name Set is used to give names to Caller ID Codes. If an ID
Code is given a name, the called partys telephone shows the name with the ID Code.
Display PT
Dial 006. Enter a location number
(000 through 999).
location no.
Press NEXT.
NEXT
Location NO?→
To enter location number 000,
you can also press NEXT.
000:Not Stored
Press END.
END
Repeat...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-131.png "Page 132
User Programming
132User Manual
Programming
Conditions
Up to 1000 Caller ID Codes per tenant, 2000 per system, can be assigned.
Program [007] Caller ID Name Set is used to give names to Caller ID Codes. If an ID
Code is given a name, the called partys telephone shows the name with the ID Code.
Display PT
Dial 006. Enter a location number
(000 through 999).
location no.
Press NEXT.
NEXT
Location NO?→
To enter location number 000,
you can also press NEXT.
000:Not Stored
Press END.
END
Repeat...")
![Page 134
User Programming
134User Manual
3.2.7 [007] Caller ID Name Set
Description
With Caller ID Service, the calling party is displayed either by its ID Code or by its name. If
the name display is required, use this program to give a name to a Caller ID Code stored in
program [006] Caller ID Dial Set.
Selection
Location number: 000 through 999
Caller ID Name: 16 characters (max.) consisting of 0 through 9, A through Z, a through
z or the following marks: ! # $ % & ( ) + , - . / : ; < = > ? @
Default...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-133.png "Page 134
User Programming
134User Manual
3.2.7 [007] Caller ID Name Set
Description
With Caller ID Service, the calling party is displayed either by its ID Code or by its name. If
the name display is required, use this program to give a name to a Caller ID Code stored in
program [006] Caller ID Dial Set.
Selection
Location number: 000 through 999
Caller ID Name: 16 characters (max.) consisting of 0 through 9, A through Z, a through
z or the following marks: ! # $ % & ( ) + , - . / : ; < = > ? @
Default...")
![Page 135
User Programming
User Manual135
Programming
Conditions
Up to 1000 Caller ID Names per tenant, 2000 per system, can be assigned. Each name
corresponds to a Caller ID Code programmed by [006] Caller ID Dial Set.
A Caller ID Name cannot be assigned if the corresponding Caller ID Dial is not assigned.
For entering characters, please refer to Section 2.2.17 Station Speed Dialing Number/
Name Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only].
Display PT
Dial 007. Enter a location number
(000 through...](http://img.usermanuals.tech/thumb/58/69274/w64_kx-td500_en_om_d-134.png "Page 135
User Programming
User Manual135
Programming
Conditions
Up to 1000 Caller ID Names per tenant, 2000 per system, can be assigned. Each name
corresponds to a Caller ID Code programmed by [006] Caller ID Dial Set.
A Caller ID Name cannot be assigned if the corresponding Caller ID Dial is not assigned.
For entering characters, please refer to Section 2.2.17 Station Speed Dialing Number/
Name Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only].
Display PT
Dial 007. Enter a location number
(000 through...")
User Programming User Manual131 3.2.6 [006] Caller ID Dial Set Description Sets the identification code of the calling party (Caller ID Code) to utilize Caller ID Service provided by a specific central office (CO). If an ID Code transmitted from CO is found in the Caller ID Code Table, the callers ID Code or a name given to the code in program [007] Caller ID Name Set is displayed on the telephone, allowing the called party to recognize the caller. Selection Location number: 000 through 999 Caller ID Code: 24 digits (max.), consisting of 0 through 9, or # Default All locations — Not Stored
User Programming 132User Manual Programming Conditions Up to 1000 Caller ID Codes per tenant, 2000 per system, can be assigned. Program [007] Caller ID Name Set is used to give names to Caller ID Codes. If an ID Code is given a name, the called partys telephone shows the name with the ID Code. Display PT Dial 006. Enter a location number (000 through 999). location no. Press NEXT. NEXT Location NO?→ To enter location number 000, you can also press NEXT. 000:Not Stored Press END. END Repeat these steps Enter a Caller ID Number. Caller ID Number Press STORE. Press NEXT or PREV or SELECT.Enter the desired location number (000 through 999). location no. To delete the current entry, press CLEAR. To change the current entry, press CLEAR and enter the new number. 006 006 CALLER ID # NEXT PREV SELECT STORE [When SELECT is pressed]
User Programming User Manual133 Features Guide References 1.5 Attended Features Caller ID Service
User Programming 134User Manual 3.2.7 [007] Caller ID Name Set Description With Caller ID Service, the calling party is displayed either by its ID Code or by its name. If the name display is required, use this program to give a name to a Caller ID Code stored in program [006] Caller ID Dial Set. Selection Location number: 000 through 999 Caller ID Name: 16 characters (max.) consisting of 0 through 9, A through Z, a through z or the following marks: ! # $ % & ( ) + , - . / : ; < = > ? @ Default All locations —Not Stored
User Programming User Manual135 Programming Conditions Up to 1000 Caller ID Names per tenant, 2000 per system, can be assigned. Each name corresponds to a Caller ID Code programmed by [006] Caller ID Dial Set. A Caller ID Name cannot be assigned if the corresponding Caller ID Dial is not assigned. For entering characters, please refer to Section 2.2.17 Station Speed Dialing Number/ Name Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only]. Display PT Dial 007. Enter a location number (000 through 999). location no. Press NEXT. NEXT Location NO?→ To enter location number 000, you can also press NEXT. 000:Not Stored Press END. END [When SELECT is pressed] Repeat these steps Enter a Caller ID Name. Caller ID Name Press STORE. Press NEXT or PREV or SELECT.Enter the desired location number (000 through 999). location no. To delete the current entry, press CLEAR. To change the current entry, press CLEAR and enter the new number. 007 007 CALLER NAME NEXT PREV SELECT STORE
User Programming 136User Manual Features Guide References 1.5 Attended Features Caller ID Service
User Programming User Manual137 3.2.8 [008] Absent Messages Set Description Used to program the absent messages. An absent message, if set by the extension user, is displayed on the display of calling extensions PT to show the reason for the users absence. Selection Message number: 1 through 9 Message: 16 characters (max.) Default 1: Will Return Soon 2: Gone Home 3: At Ext %%%% 4: Back at %%:%% 5: Out Until %%/%% 6: In a Meeting 7: through 9: Blank (not stored)
User Programming 138User Manual Programming Display PT Dial 008. Enter a message number (1 through 9). message no. Press NEXT. NEXT MSG NO?→ To enter message number 1, you can also press NEXT. MSG1:Will Return Press END. END [When SELECT is pressed] Repeat these steps Enter the message. message Press STORE. Press NEXT or PREV or SELECT.Enter the desired message number (1 through 9). message no. To delete the current entry, press CLEAR. To change the current entry, press CLEAR and enter the new message. 008 008 ABSENT MSG. NEXT PREV SELECT STORE
User Programming User Manual139 Conditions There is a maximum of nine messages. Messages 1 through 6 are programmed at the factory but can be changed. Each message has a maximum of 16 characters. For entering characters, please refer to Section 2.2.17 Station Speed Dialing Number/ Name Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only]. You can enter a maximum of seven % characters per message which can be programmed at each users station. The extension user can enter 0 through 9, and # for the % characters. If the user enters digits less than the number of % characters, it is recommended to fill the remaining % characters with # or . To display parts of the message which have scrolled off the display, press or . Features Guide References 1.17 Display Features Absent Message Capability
User Programming 140User Manual 3.2.9 [009] Quick Dial Number Set Description Stores up to eight quick dial numbers. Selection Location number: 1 through 8 Desired number: 24 digits (max.) Default All location numbers — Not Stored