Panasonic Kx Td500 User Manual
Have a look at the manual Panasonic Kx Td500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Station Features and Operation (PT/SLT) User Manual221 4.3.20 Calling Line Identification Restriction (CLIR) / Calling Name Identification Restriction (CNIR) When making an outside call through an ISDN line, you can prevent the other party from seeing you identification number/name. You can change the setting at any time for a particular call. This is one of the ISDN supplementary service. To restrict the presentation of your number/name to the other party To present your number/name to the other party PT and SLT Lift the handset or press SP-PHONE/MONITOR.Hang up or press SP-PHONE/MONITOR.Confirmation tone and dial tone Dial 592. 952 CLIR ON PT and SLT Lift the handset or press SP-PHONE/MONITOR.Hang up or press SP-PHONE/MONITOR.Confirmation tone and dial tone Dial 590. 950 CLIR OFF
Station Features and Operation (PT/SLT) 222User Manual To change the setting at any time for a particular call Conditions If the presentation is enabled, the other party can check the callers number/name before answering the call. Programming Guide References 2.3 Numbering Plan – CLIR/CNIR Features Guide References 2.2 ISDN Originating Features Calling Line Identification Presentation (CLIP) Calling Line Identification Restriction (CLIR) Calling Name Identification Presentation (CNIP) Calling Name Identification Restriction (CNIR) User Manual References 4.3.19 Calling Line Identification Presentation (CLIP) PT and SLT Lift the handset or press SP-PHONE/MONITOR.Confirmation tone and dial tone Dial 591. 951 For SLT, PTFor PT9 CO trunk group no.8For SLT, PTDial toneTalk.Hang up or press SP-PHONE/MONITOR. phone no. Dial the phone number. The display shows the phone number The selected CO indicator light turns green. For PT: Press CO. For SLT, PT: Dial 9. For SLT, PT: Dial 8 and the trunk group number (01 through 48).
Station Features and Operation (PT/SLT) User Manual223 4.3.21 Conference, 3-Party During a two-party conversation, you can add a third party to make a three-party conference. The members of a conference on a line may be three extensions, one extension and two CO lines, or two extensions and one CO line. To establish a 3-party conference SLT PT Dial desired partys number.Talk to the third party. During a two-party conversation; Flash the switchhook.Dial 3.Flash the switchhook. A three-party conference is now established.desired partys no. Confirmation tone (optional)Confirmation tone and dial tone 3 Enter a line access code (9 or 801 through 848) before an external phone number. The other party is placed on hold. Talk to the third party. During a two-party conversation; Confirmation tone (optional)Confirmation tone and dial tone Press CONF. Press CONF. CONFCONFA three-party conference is now established. Press a CO button or enter a line access code (9 or 801 through 848) before an external phone number. The CONF indicator light turns steady red. The corresponding CO or INTERCOM or DN indicator light turns green . The current party is placed on hold. The CONF indicator light flashes red slowly. Dial desired partys number. desired partys no.
Station Features and Operation (PT/SLT) 224User Manual To leave a 3-party conference To terminate one party and talk to the other To talk to the third party while holding the original party PT and SLT Hang up or press SP-PHONE. The other two parties may continue their conversation. If both other two parties are on outside lines, they will be disconnected. PT A conversation with the desired party is established and the other party is disconnected. This operation is available only when the extension user established the conference call by using two different line access buttons. (Not available when only one button is used.) or Talk. Press the CO or INTERCOM or DN of the party to remain connected. or Confirmation tone (optional) (CO)(DN)INTERCOM PT If both other two parties are extensions, the INTERCOM or PDN indicator light flashes green moderately. Talk to the third party. Press TRANSFER.Confirmation tone (optional) TRANSFER
Station Features and Operation (PT/SLT) User Manual225 To talk to the original party while holding the third party To put both parties on hold Conditions Conference call arrangement A conference call can be one of the following three arrangements: 1-inside and 2-outside; 2-inside and 1-outside; and 3-inside. Conference trunk Up to eight conference calls are available at a time by default. If optional TSW Conference Expansion card is installed, up to 64 conference calls are available at a time. Executive Busy Override, Privacy Release A 3-party conference call is also established by Executive Busy Override or Privacy Release. Confirmation tone When a 2-party call is changed to a 3-party conference call and vice versa, a confirmation tone is sent to all three parties. Eliminating the tone is programmable. Pressing a CO button which is not in the conference, allows you to exit from the conference SLT Talk to the original party.Flash the switchhook.Confirmation tone (optional) PT Press HOLD. HOLD For an ICM type PT, this operation is available only when at least one party is on a CO line. For a DN type PT, this operation is available only when the extension user established the conference call using two different line access buttons. (Not available when only one button is used.)
Station Features and Operation (PT/SLT) 226User Manual leaving the other two parties connected unless they both are on CO lines. If they both are on CO lines, they will be disconnected. You can return to the original party before the third party answers by pressing the TRANSFER button. If a CONF button is not provided on your PT, it can be assigned to a flexible (CO, DSS, PF) button by Station, User or System Programming. Call Splitting During a 3-party conference call, the conference originator can talk to either one of other two parties alternately by pressing the TRANSFER button (for PT user) or flashing the switchhook (for SLT user). In this case, the PT user is connected with the latter party first and the SLT user is connected with the previous party first. If Released Link Operation is enabled on your extension by System Programming, you cannot establish a conference call. Programming Guide References 2.4 Class of Service (COS) – Released Link Operation 2.8 System Option – Confirmation tone for Override, Barge-in, Conference and Privacy Release 4.3 Extension Line – CO Key – PF Key 4.4 DSS Console – DSS Key – PF Key Features Guide References 1.6 Originating Features Executive Busy Override 1.10 Holding Features Call Splitting 1.12 Conversation Features Conference, 3-Party Conference, 5-Party Conference, Unattended Privacy Release
Station Features and Operation (PT/SLT) User Manual227 User Manual References 2.2.3 Flexible Button Assignment 3.2.5 [005] Flexible CO Button Assignment 4.3.23 Conference, Unattended 4.3.33 Executive Busy Override 4.3.63 Privacy Release
Station Features and Operation (PT/SLT) 228User Manual 4.3.22 Conference, 5-Party A PT user can originate a 5-party conference call which includes outside or inside parties or both in any combination. To establish a 5-party conference PT Dial 52 . Repeat these steps Dial extension/phone number of the other party extension / phone no. You must dial a line access code (9 or 801 through 848) as the leading digit(s) when calling an outside party. 52 Conference Start Lift the handset or press SP-PHONE/MONITOR.Dial tone The CONF indicator light begins to flash slowly in red. The INTERCOM or DN indicator light turns green. Talk to the other party. CONF Press CONF. The call is parked in the idle parking zone with the smallest zone number. CONF Press CONF.Confirmation tone All the calls you parked are retrieved from the parking zones.A 5-party conference is now established.
Station Features and Operation (PT/SLT) User Manual229 To terminate the 5-party conference (conference originator only) Conditions Up to two 5-party conference calls can be held at a time in the system, even if TSW Conference Expansion card is installed on the TSW card. Conference call arrangement A 5-party conference call can include both inside and outside parties in any combination. Conference trunk At least three idle conference trunks are required to establish a 5-party conference call. Executive Busy Override Executive Busy Override does not function to the extension engaged in the 5-party conference call. CONF (Conference) button If a CONF button is not provided on a PT, it can be assigned to a flexible (CO, DSS, PF) button by Station, User or System Programming. If the other party you called is in one of the following status, you can terminate the current call and call a new party by pressing the FLASH button. – the other party does not answer the call. – the other party refuses to join a five-party conference call. – the other party is a Voice Mail extension. Programming Guide References 2.3 Numbering Plan – Call Park / Call Park Retrieve 4.3 Extension Line – CO Key – PF Key 4.4 DSS Console – DSS Key – PF Key PT All other participants are disconnected from the call. OR(CO)(DN) or Press an idle CO or DN button. During the 5-party conference call Hang up or press SP-PHONE/MONITOR.
Station Features and Operation (PT/SLT) 230User Manual Features Guide References 1.12 Conversation Features Conference, 5-Party User Manual References 2.2.3 Flexible Button Assignment 3.2.5 [005] Flexible CO Button Assignment