Panasonic Kx Td500 User Manual

							Station Features and Operation (PT/SLT)
User Manual341
– Paging Deny Set / Cancel
2.8 System Option
– Special dial tone after setting feature
Features Guide References
1.14 Paging Features
Paging
User Manual References
4.3.55 Paging
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access 
Menu 
						

							Station Features and Operation (PT/SLT)
342User Manual
4.3.58 Paging and Transfer
You can transfer a call after making a paging announcement via Paging — All, Paging — 
External, or Paging — Group. 
Using Paging — All
PT and SLT
Dial tone
Confirmation tone
(optional)
Confirmation tone
(optional)Announce.
Wait for an answer.Dial 32   .
During a conversation;
Hang up or press SP-PHONE/MONITOR. For PT: Press TRANSFER.
For SLT: Flash the switchhook.
For SLT For PT32
TRANSFER
The other party is placed on
consultation hold.You may dial 33  instead.
The held party and the paged extension are
connected and can start a conversation. 
						

							Station Features and Operation (PT/SLT)
User Manual343
Using Paging — External: to all external pagers
Using Paging — External: to a particular external pager
PT and SLT
Dial tone
Confirmation tone
(optional)
Confirmation tone
(optional)Announce.
Wait for an answer.Dial 320.
During a conversation;
Hang up or press SP-PHONE/MONITOR. For PT: Press TRANSFER.
For SLT: Flash the switchhook.
For SLTFor PT
TRANSFER
320
The other party is placed on
consultation hold.
The held party and paged extension are connected
and can start a conversation.
PT and SLT
Dial tone
Confirmation tone
(optional)
Confirmation tone
(optional)
Announce.
Wait for an answer.
Dial 32.
During a conversation;
Hang up or press SP-PHONE/MONITOR. For PT: Press TRANSFER.
For SLT: Flash the switchhook.
For SLTFor PT
Dial external pager number(1 or 2).
external pager no.32
TRANSFER
The other party is placed on
consultation hold.
The held party and paged extension are connected
and can start a conversation. 
						

							Station Features and Operation (PT/SLT)
344User Manual
Using Paging — Group: to all paging groups (01-16)
Using Paging — Group: to a particular paging group
PT and SLT
Dial toneConfirmation
tone (optional)Confirmation
tone (optional) Announce. Wait for
an answer.
During a conversation;
Hang up or
press
SP-PHONE.For PT: Press 
             TRANSFER.
For SLT: Flash the
              switchhook.
For SLTFor PT
Dial 33 #.
TRANSFER
33
The other party is placed on
consultation hold.The held party and the paged extension are
connected and can start a conversation.
PT and SLT
Dial tone
Confirmation
tone (optional)
Confirmation
tone (optional)
Announce. Wait
for an
answer.
Dial 33.
During a conversation;
Hang up or pressSP-PHONE. For PT: Press TRANSFER.
For SLT: Flash the 
switchhook.
For SLTFor PT
Enter a paging
group number
(01 through 16).
paging 
group no.33
TRANSFER
The other party is placed on
consultation hold.
The held party and the paged extension are
connected and can start a conversation. 
						

							Station Features and Operation (PT/SLT)
User Manual345
4.3.59 Paralleled Telephone Connection
A Proprietary Telephone (PT) can be connected in parallel with a Single Line Telephone (SLT). 
This feature allows you to enable or disable SLT ringing. When a parallel connection is made, 
either telephone can be used.
To enable / disable SLT ringing
Conditions
The default is Parallel Off (No ring).
The PT can be used to perform normal operations whether or not the SLT is set to ring.
When receiving a call:
—If SLT ringing is enabled, then both the PT and the SLT will ring except when the PT is 
in Hands-free Answerback mode or Voice-Calling mode with the Alternate 
Calling —Ring/Voice feature.
—If SLT ringing is disabled, then the PT rings but the SLT does not. However, the SLT 
can answer the call.
When the SLT is in use, the display and the indicators of the PT will work in the same way 
as if the PT is in use.
In the DPT + SLT combination, if one telephone goes off-hook while the other telephone is 
on a call, the call is switched to the former. 
In the APT + SLT combination, if one telephone goes off-hook while the other telephone is 
on a call, a 3-party call is established. If one user goes on-hook, the other user continues the 
call.
The XDP
*1 feature is available. Please refer to EXtra Device Port (XDP) in Section 1.1 
System Expansion of the Features Guide.
PT
Confirmation 
tone and dial 
toneDial 39.Hang up or press SP-PHONE/
MONITOR.For Ring mode: Dial 1.
For No Ring mode: Dial 0.
No Ring Ring39
1
0
Lift the handset or press 
SP-PHONE/MONITOR.

— (when enabling)
— (when disabling)
Parallel Off
Parallel On 
						

							Station Features and Operation (PT/SLT)
346User Manual
This feature is only available for PT extensions that are connected to a DHLC or HLC card.
With the KX-T7431, KX-T7433, KX-T7436, or KX-T7235, you can execute this feature 
using the display operation.
Installation Manual References
2.4.12 Parallel Connection of the Extensions
Programming Guide References
1.4 Extension Port Assignment
– Parallel / XDP (DHLC card)
– Parallel / XDP (HLC card)
Features Guide References
1.1 System Expansion
EXtra Device Port (XDP)
1.3 System Features
Paralleled Telephone
1.6 Originating Features
Alternate Calling—Ring/Voice
User Manual References
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access 
Menu
*1XDP (eXtra Device Port) expands the number of telephones available in the system by allowing an extension port to contain two 
telephones. For more details, please consult your dealer. 
						

							Station Features and Operation (PT/SLT)
User Manual347
4.3.60 PDN Call
If an SDN button (which corresponds with the PDN of another extension) is assigned on your 
PT, you can call that extension with a simple operation.
Making a PDN call
PT
The SDN indicator light turns green.
Lift the handset or
press
SP-PHONE/MONITOR.Press an idle SDN
(flexible button).
(SDN) (SDN)
Press the same
SDN again.Talk.Dial tone. Hang up or press
SP-PHONE/MONITOR. 
						

							Station Features and Operation (PT/SLT)
348User Manual
Screened Call Transfer
Unscreened Call Transfer
(SDN)
Press an idle SDN
(flexible CO button).
(SDN)
Press the same
SDN again.
Press TRANSFER.
Announce.
Wait for 
an answer.
Confirmation tone
and dial toneDial tone
Hang up or press
SP-PHONE/MONITOR.
PT
The call is transferred.
The other party is placed on
consultation hold.
During a conversation;
TRANSFER
The SDN indicator light turns green.
PT
(SDN) (SDN)
Press an idle SDN.
(flexible CO button)Press the
same SDN
again.
TRANSFER
Press TRANSFER.Confirmation tone
and dial toneDial tone.
Hang up or press
SP-PHONE/MONITOR.
The call is transferred. The other party is placed on
consultation hold.
The SDN indicator light turns green.
During a conversation; 
						

							Station Features and Operation (PT/SLT)
User Manual349
Conditions

SDN button
An SDN button can be assigned to a flexible CO button on a DN type PT by Station, User 
or System Programming.

FWD/DND Override
The call originated by this feature overrides FWD/DND (Call Forwarding/Do Not Disturb) 
feature assigned on the PDN owner extension.

A call made by this feature rings the destination PDN button immediately even if delayed 
ringing or no ring is set on that PDN button. Please refer to Section 2.2.9 PDN/SDN 
Button Delayed Ringing Assignment.
Programming Guide References
4.3 Extension Line
– CO Key
Features Guide References
1.6 Originating Features
PDN Call
1.11 Transferring Features
Ringing Transfer
1.16 Button Features
Button, Line Access
User Manual References
2.2.3 Flexible Button Assignment
2.2.9 PDN/SDN Button Delayed Ringing Assignment
3.2.5 [005] Flexible CO Button Assignment
4.3.68 Ringing Transfer 
						

							Station Features and Operation (PT/SLT)
350User Manual
4.3.61 Phantom Extension
Allows you to route calls to a phantom extension. The call arrives at the extension who has the 
corresponding Phantom button. A flexible CO button can be assigned as the Phantom button. 
The lighting patterns of Phantom button and status are as follows.
Off: Idle
Red: You are calling a phantom extension.
Flashing green rapidly: Incoming call
To call a phantom extension
PT
Press Phantom 
(flexible button).or
While the Phantom button indicator light is off;
The Phantom indicator light turns red (steady).
SLT
Dial the phantom 
extension number.
Phantom extension no.
Dial the phantom 
extension number.
Phantom extension no.
Lift the handset.Talk.
(Phantom)
Lift the handset 
or press 
SP-PHONE/
MONITOR.Talk.