Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-117 CAMA/E911 Installation 
5
Screen 5-8. CAMA Numbering Format form
33. In the CAMA Numb ering  - E911 Format sc reen (p ag e 1), in System 
CESID Default:
 field , enter your own system d efault and p ress 
En t e r. 
This is the numb er outp ulsed  when the extension c od e is not found in the 
CAMA Numb ering  tab le. See Sc reen 5-8
.
34. In the Ext Len
, Ext Code
, CESID
, and  Total Length
 field s, fill out to 
your own CAMA numb ering  p lan and  p ress 
En te r. Be sure to c over all 
extensions.
35. At the promp t, typ e change cor 
 
(the c lass of restriction (COR) 
to be changed) and press 
En t e r. Chang e all CORs that are defined  for 
stations in ord er to remove any c alling  p arty restric tions for 911 c alls.
                                                                     Page 1 of 3
                         CAMA NUMBERING - E911 FORMAT
System CESID Default: 5241100______
Ext  Ext                   Total         Ext  Ext                   Total
Len Code      CESID      Length         Len  Code      CESID      Length
4_  101__  5381234_____    7_             __  _____  __________     __
4_  1____  555_________    7_             __  _____  ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __ 
						

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-118 Add IP Interface 
5
Screen 5-9. Class of Restriction form (page 1)
36. On the Class of Restric tion sc reen (pag e 1), in the Calling Party 
Restriction:
 field , typ e none 
and  p ress 
En te r.
37. Typ e Save Translation
 and press 
En te r.
Add IP Interface
NOTE:
This sec tion c ontains p reliminary material for Med ia Proc essor features.
DEFINITY ECS IP Solutions allows you to send voice and fax from the DEFINITY 
ECS through an Internet protocol (IP) network to other DEFINITY ECSs having 
this feature or to other H.323 V2 compliant endpoints. It is implemented using the 
TN802/B IP Interface, which is a Windows NT server residing on the IP Interface 
Assembly inside the DEFINITY ECS.
The IP Interface is an assembly composed of a TN802B circuit board, a processor 
card, and DSP resource card. For ordering purposes, the assembly is identified as 
a J58890MA-1 L30, but for simplicity, we refer to it in this book as the TN802B IP 
Interface.
The TN802B IP Interface operates in two modes: IP Trunk, available with Release 
7 or later, and Media Processor (MedPro), available with Release 8. The IP Trunk 
mode is Internet Telephone Server—Enterprise (ITS-E) compatible, and the 
MedPro mode is H.323 V2 compatible. The TN802B IP Interface is backwards 
compatible and defaults to IP Trunk mode.To use it in MedPro mode, you activate 
it through administration on the change circuit-packs command.
 Page 1 of 3
CLASS OF RESTRICTION
               COR Number: 10
          COR Description: supervisor
                      FRL: 0 APLT? y
  Can Be Service Observed? n           Calling Party Restriction: none
Can Be A Service Observer? n Called Party Restriction: none
Time of Day Chart: 1  Forced Entry of Account Codes? n
         Priority Queuing? n                Direct Agent Calling? n
     Restriction Override: none Facility Access Trunk Test? n
     Restricted Call List? n Can Change Coverage? n
Unrestricted Call List?
            Access to MCT? y  Fully Restricted Service? n
Category For MFC ANI:   7  Hear VDN of Origin Annc.? n
         Send ANI for MFE? n_  Add/Remove Agent Skills? n
Hear System Music on Hold? y PASTE (Display PBX Data on Phone)? n
Automatic Charge Display? n 
Can Be Picked Up By Directed Call Pickup? n
Can Use Directed Call Pickup? n 
						

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-119 Add IP Interface 
5
For more information on the IP Interface capabilities and limitations, refer to the 
DEFINITY Enterprise Communications Server Release 8 Overview.
The following sections describe the process for installing the TN802B IP Interface 
and cables and connecting it to a computer terminal, first for IP Trunk mode, then 
for MedPro mode.
!WARNING:
When c onnec ted  remotely via p c ANYWHERE, only use the p c ANYWHERE 
Restart Host Computer button on the toolbar to restart Windows NT.
Media Processor Mode
To operate in MedPro mode, you must install the TN802B IP Interface and, if the 
system does not have one, you must also install and administer a TN799B C-LAN 
circuit pack. For C-LAN administration, refer to 
DEFINITY Enterprise 
Communications Server Administration for Network Connectivity.
If you have existing TN802 IP Interface, however, you can upgrade them to 
TN802Bs by downloading the firmware onto the circuit pack (see ‘‘
Making a 
TN802 into a TN802B’’ on page 5-144). 
Prepare for Installation
Have the following equipment on site before your shipment arrives:
nAC power outlets for the modem and monitor.
nThree unoccupied and adjoining port slots in the DEFINITY ECS for the 
TN802B IP Interface, if needed.
The TN802B oc c up ies only one slot, b ut it need s the two slots to its left for 
c learanc e.
nAn additional unoccupied port slot for the TN799B, if needed. If you have 
an existing TN799 circuit pack, replace it with the TN799B.
nA 10 BaseT or 10/100 BaseT Ethernet connection into your local area 
network
nTwo or more valid, unused IP addresses on your network that can be 
assigned to the IP Interface server. You also need the subnet mask and 
default gateway. 
nAn analog telephone line reserved (DID is okay) for the IP Interface 
diagnostic modem 
nA valid telephone number reserved for the IP Interface diagnostic modem  
						

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-120 Add IP Interface 
5
In addition if non-U.S. customer:
nModem comparable to a U.S. Robotics Sportster Model USR 33.6 EXT. 
nCable from modem to TN802B external cable assembly.
We recommend that you protect your cabinet with an uninterruptible power 
system (UPS).
Check your Shipment
When your DEFINITY Media Processor order arrives at your site, check the 
contents.
1. Insp ec t the ship p ing  c arton for d amag e b efore op ening  it. If the b ox is 
d amag ed , d o not op en it. Inform the ship p ing  c omp any, and  ask for 
instruc tions on filing a c laim.
2. If the b ox is und amag ed , c hec k the c ontents ag ainst the p ac king  slip . 
Chec k the c ondition of eac h c omp onent, and note any d amag e or 
shortag es on the p ac king  slip . The c arton should  c ontain the following  for 
eac h IP Interfac e ord ered :
3. Read  and  follow any d irec tions inserted  into the p ac kag e b y the fac tory.
Table 5-26. Required Hardware
Equipment Description Quantity
108525528 TN799B C-LAN c irc uit p ac k. One 
TN799B may supp ort more than one 
TN802B, d ep end ing  on the numb er of 
trunks.1
J58890MA-1 L30 TN802B IP Interfac e Assemb ly
1 or more
H600-475 TN802B external c ab le assemb ly 1
259A c onnec tor 1
DW8 c ab le 1
407633999 U.S. Rob otic s Sp ortster external 
mod em, Mod el USR 33.6 EXT (U.S. 
customers only). Non-U.S. customers 
must p rovid e a mod em c omp arab le to 
this model
. 1
601087091 20-ft DB-25 serial c ab le from modem 
to TN802B external c ab le assemb ly 
(U.S. c ustomers only). Non-U.S. 
c ustomers must p rovid e a serial c ab le.1 
						

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-121 Add IP Interface 
5
The TN802B external cable assembly is a bundle of cables with an amphenol 
connector at the end of the bundle and various PC-type connectors (VGA, 
Universal Serial Bus [USB], mouse, keyboard, Ethernet, modem, and COM2) at 
the ends of the individual cables. See Figure 5-44
. Look for the label where the 
bundle enters the amphenol connector. 
Figure 5-44. TN802B IP Interface External Cable Assembly
Connect the Cables
1. Determine into whic h p ort slots you are p utting the TN799B C-LAN and  
TN802B IP Interfac e c irc uit p ac ks.
NOTE:
Make sure that at least 3 ad jac ent slots are free for the TN802B.
From the rear of the cabinet:
2. If add ing  a new TN799B, c onnec t the 259A c onnec tor to the b ac kp lane 
c onnec tor c orrespond ing  to the TN799B slot. Figure Notes
1. Amp henol c onnec tor to c onnec tor 
c orresp ond ing to TN802B slot
2. To VGA monitor
3. To USB (not used )
4. To keyb oard5. To mouse
6. To ethernet
7. 25-p in male c onnec tor to mod em
8. 25-p in male c onnec tor to COM2 
cbdfocto AWF 122398
2
1
345678 
						

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-122 Add IP Interface 
5
3. If add ing  a new TN799B, c onnec t one end  of the DW8 c able to the 259A 
c onnec tor. Connec t the other end  to the c ustomer’s network.
4. Connec t the amp henol c onnec tor on the external c ab le assemb ly to the 
b ac kp lane c onnec tor c orresp ond ing  to the TN802B slot (the hig hest 
numb ered c onnec tor of the 3 slots req uired )
Connect the Modem
NOTE:
These instruc tions are for c onnec ting  the U.S. Rob otic s mod em 
sup p lied  to U.S. c ustomers only. If using  a d ifferent mod em, follow 
the manufac turer’s instruc tions on c onnec ting  the mod em.
1. Connec t the RS232 p ort of the mod em to the MODEM c onnec tor of the 
TN802B external c ab le assembly. 
NOTE:
Chec k the lab els near the c onnec tors; the MODEM and  COM2 
c onnec tors look the same.
2. Connec t an analog  telephone line to the left most analog -line p ort on the 
mod em as shown in Fig ure 5-45
. 
3. Make sure that the mod em’s DIP switc hes are set as shown in 
Fi g u re  5 - 4 5
. 
4. Plug  the mod em into an AC p ower outlet.
5. Turn on the mod em using  the switc h on the front of the mod em.
Figure 5-45. External Modem Connections for U.S. Robotics Modem Figure Notes
1. Connec t analog  line here.
2. DIP switch 5 must b e up .3. Connec t MODEM c onnec tor here.
4. Connec t p ower c onnec tor here.
12345678
modfrobo KLC 030499
234
1 
						

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-123 Add IP Interface 
5
Connect the Ethernet
1. Connec t the network c ab le to the ETHERNET c onnec tor on the TN802B 
external c ab le assemb ly.
Upgrading to TN802B
If you have a TN802 IP Interface, you must either install a TN802B or upgrade the 
existing circuit pack to operate in MedPro mode. Refer to ‘‘
Making a TN802 into a 
TN802B’’ on page 5-144. To operate in the MedPro mode, you need to upgrade 
the switch to Release 8 or later.
Install the Circuit Packs
!CAUTION:
When ad d ing  or rep lac ing any hard ware, b e sure to g round  yourself 
ag ainst elec trostatic  d isc harge (ESD) b y wearing  a g rounded  wrist 
strap .
NOTE:
The TN799B and  TN802B c irc uit p ac ks are hot-swap p ab le, so you 
d o not need  to p ower down the c arrier to install them.
If you need  to remove the TN802B IP Interfac e from the c arrier at a 
later time, shut d own Wind ows NT first b y p ressing  the rec essed  
reset b utton on the fac ep late (see Fig ure 5-4 6
) of the TN802B IP 
Interfac e until the LCD shows a flashing  MSHUT *
. When the flashing  
stop s and  the asterisk d isap p ears (ab out 2 min), it is safe to remove 
the c irc uit pac k. 
						

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-124 Add IP Interface 
5
Figure 5-46. TN802B IP Interface faceplate
1. Insert the TN799B c irc uit p ac k into the p ort slot id entified  earlier.
NOTE:
If rep lac ing  the existing  TN799 c irc uit p ac k, remove it first and 
rep lac e it with the new one.
To p rop erly seat the c irc uit p ac k, p ush firmly on the front of the 
fac ep late until the latc h reac hes the bottom rail of the c arrier. Then 
c lose the latc h until it is fully eng ag ed . Figure Notes
1. LCD display
2. Reset b utton (rec essed )
3. Red  b oard  status LED4. PCMCIA c ard  slot
5. Yellow PCMCIA disk-in-use LED
1
2
3
4
5
fpdfmapd KLC 030899 
						

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-125 Add IP Interface 
5
2. Insert the TN802B IP Interfac e into the rig ht most of the three slots you 
reserved  for it (see Fig ure 5-47
) and  seat it p rop erly.
When you p lug  in the TN802B IP Interfac e, the c irc uit p ac k starts to b oot 
and  the LCD read s PC Boot
. After ab out 3 to 4 minutes, it c hang es to 
MEDPRO *
. 
NOTE:
If this is an initial installation, the TN802B IP Interfac e need s to b e 
administered first (see ‘‘
Ad minister the IP Interfac e’’ on p age 5-126). 
Figure 5-47. J58890MA-1 L30
 IP Interface Assembly
Administer the TN799B C-LAN
Refer to the DEFINITY Enterprise Communications Server Administration for 
Network Connectivity
.
456
789
1
0
1
11
21
3
1
41
51
6
indfmapd KLC 031299 
						

							DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-126 Add IP Interface 
5
Administer the IP Interface
Administration is usually done remotely; call your service representative to start 
the process.
Administration Steps
NOTE:
Refer to the DEFINITY Enterp rise Communic ations Server 
Ad ministration for Network Connec tivity for Release 8 for sp ec ific  
information.
1. Login as craft
2. Type change node-names
 and  p ress 
En te r 
3. On sc reen 2, typ e in the node name and  IP add ress for the TN802B.
4. Type change circuit-pack
 and  p ress 
En te r.
change node-names                                               Page   2 of   6 
                                  NODE NAMES                                    
    Name             IP Address           Name              IP Address
clan-a1             192.168.1 .31  .   .   . 
clan-b1             192.168.2 .31  .   .   . 
default             0  .0  .0  .0  .   .   . 
med-a1              192.168.1 .81  .   .   . 
.   .   .  .   .   .   
.   .   .  .   .   .   
.   .   .  .   .   .