GE Logiq P5 Service Manual

							GE HEALTHCARE
DIRECTION 5394141, REVISION 1 LOGIQ™ P5 SERVICE MANUAL
Section 4-2 - Required Equipment 4 - 15
4-3-10 Using the DVD-R
4-3-10-1 Using the DVD-R
1.) Go to the Utility->Connectivity->Removable Media.
2.) Insert CD/DVD media.
3.) Press Verify 
4.) The properties will be like below. a.) Capacity, Free space depends on media type.
b.) Formatted / Finalized : No
5.) Go to Patient.
6.) Press Data Transfer (located at the upper-left side of Patient screen)
7.) Select Export task.
NOTICENever move the unit with a disk in the DVD-R because the drive actuator will not be locked 
and the DVD-R could break. 
Figure 4-7   Removable Media 
						

							GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL 
4 - 16 Section 4-2 - Required Equipment
4-3-10-1              Using the DVD-R (cont’d)
8.) Select the type of Removable CD/DVD on the [To] combo box.
9.) It will do auto -formatting.
10.) After auto-formatting, select some patients on  the upper list area and then press the [Transfer] 
button.
11.) it will do trans ferring to CD/DVD.Figure 4-8   Formatting
Figure 4-9   Transferring 
						

							GE HEALTHCARE
DIRECTION 5394141, REVISION 1 LOGIQ™ P5 SERVICE MANUAL
Section 4-2 - Required Equipment 4 - 17
4-3-10-1              Using the DVD-R (cont’d)
12.) The selected data is transferred correctly.
13.) Press F3 and select the [Yes and Verify files].
14.) It will do finalizing. Figure 4-10   Transfer
Figure 4-11   Finalizing 
						

							GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL 
4 - 18 Section 4-2 - Required Equipment
4-3-10-1              Using the DVD-R (cont’d)
15.) It will do Verifying.
16.) It will eject the CD/DVD and Go  to Utility and reinsert the CD/DVD.
17.) Go to Utility- >Connectivity->Removable Media.
18.) Press Verify 
19.) The properties will be like below.  a.) Capacity is the size of transferred data.
b.) Free space is 0.
c.) Formatted / Database  Present / Finalized : Yes
(DICOMDIR Present : depends on setting) Figure 4-12   Verifying
Figure 4-13   Removable Media
NOTICEAvoid mechanical ejection whenever possible . Mechanical ejection leaves the actuator 
unlocked. If forced to use this method, reboot the system, then insert and eject a known good 
disk using one of the other methods. 
						

							GE HEALTHCARE
DIRECTION 5394141, REVISION 1 LOGIQ™ P5 SERVICE MANUAL
Section 4-2 - Required Equipment 4 - 19
4-3-11 Backup and Restore Database, Preset Configurations and Images
NOTE: When upgrading from R1.0.x or R2.0.x to R3.0.x or R4.0.x ,preset cannot be transferred. Refer 
to the table below.
4-3-11-1 Formatting Media 1.) To format the backup media, CD- R or DVD-R, select the UTILITY
 key on the Front Panel.
2.) Select CONNECTIVITY
, then RERNOVABLE MEDIA. Properly label and Insert the backup 
media. 
3.) Select the media type from the drop down menu.
4.) Enter the label for the media as shown in Figure  4-14. It is best to use all capital letters with no 
Table 4-4    LP5 BT11(R4.x.x) compatibility
Preset
Compatibility
R1.x.xR2.x.xR3.x.x
Patient Archive
YesYes Yes
Report Archive YesYes Yes
Imaging Presets NoNoYes
Connectivity ConfigurationNoNoYes
Measurement ConfigurationNoNoYes
Comment/Body Pattern LibrariesNoNoYes
Report Templates (Same Software Version Only) NoNoNo
3D/4D NoNoYes
Key Macro NoNoYes
All OthersNoNoYes 
						

							GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL 
4 - 20 Section 4-2 - Required Equipment
spaces or punctuation marks.
5.) The Ultrasound system displays a pop-up menu, as shown in Figure 4-15. When the formatting  has been completed, press OK
 to continue.
6.) If desired, verify that the form at was successful by returning to  Utility > Connectivity > 
Removable Media  and selecting VERIFY
 as shown in Figure 4-12. 
Figure 4-14   Format and Verify Media
Figure 4-15   Format Successful Pop-up Menu
Verify Format
Format
Media 
Selection
Media Label 
						

							GE HEALTHCARE
DIRECTION 5394141, REVISION 1 LOGIQ™ P5 SERVICE MANUAL
Section 4-2 - Required Equipment 4 - 21
4-3-11-2 Backup System Presets and Configurations
NOTE: Always backup any preset configurations before a so ftware reload. This ensures that if the presets need 
to be reloaded, afte r the software update, they will be the same ones the cu stomer was using prior to 
service.
1.) Insert a formatted CD-R or DVD-R into the drive.
2.) Press UTILITY
 key 
3.) Select SYSTEM
. on the monitor screen
4.) On the monitor display, select BACKUP/RESTORE
.
5.) In the Backup list, select Patient Archive,  Report Archive, User Defined Configuration.
6.) In the Media field, select DVD-R.
7.) Select BACKUP
.
The system performs the backup. As  it proceeds, status information is displayed on the Backup/Restore 
screen.
Figure 4-16   Backup/Restore Menu
Check here to 
backup presets 
and configurations 
						

							GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL 
4 - 22 Section 4-2 - Required Equipment
4-3-11-3 Restore System Presets and Configurations
1.) Insert the Backup/Restore CD-R or DVD-R into the drive. 
2.) Press the UTILITY
. key
3.) Select SYSTEM
.menu on the monitor screen
4.) On the monitor display,  select BACKUP/RESTORE
.
5.) In the Restore list, select Pa tient Archive, Report Archive, User Defined Configuration.
6.) In the Media field, select the Backup/Restore DVD-R.
7.) Select RESTORE
.
d.) The system performs the restore. As it proceeds, status information is displayed on the  Backup/Restore screen.
CAUTIONThe restore procedure  overwrites the existing database on the local hard drive. Make sure to insert 
the correct CD-R or DVD-R.
Figure 4-17   Backup/Restore Menu 
						

							GE HEALTHCARE
DIRECTION 5394141, REVISION 1 LOGIQ™ P5 SERVICE MANUAL
Section 4-2 - Required Equipment 4 - 23
4-3-11-4 Archiving Images
To export an exam(s) to a compatible Ultrasound system:
1.) Format the removable media (CD-ROM/DVD-R).  Label the removable media. Answer Yes/OK 
to the messages.Press Patient. Deselect any select ed patient(s) in the search portion of the 
Patient screen. Press Exam Data Transfer (located at the upper, left-hand corner of the Patient 
menu).
2.) Select Export task Button.
3.) The [From] combo box is not active. It displa ys Local Archive. The [To] combo box is active. 
Select the type of removable media CD R/DVD- R. Then please wait until the patient list is 
visible. Figure 4-18   Exam Data Transfer
Figure 4-19   Task button
Figure 4-20   To Combo Box 
						

							GE HEALTHCARE
DIRECTION 5394141, REVISION  1 LOGIQ™ P5 SERVICE MANUAL 
4 - 24 Section 4-2 - Required Equipment
4-3-11-4              Archiving Images (cont’d)
4.) In the patient list at the top of the Patient me nu, select the patient(s) you want to export. You 
can use Windows commands to select more than  one patient. To select a consecutive list of 
patients, click the cursor on the first name, move  the cursor to the last name, then press and 
hold down the Shift+right Set ke y to select all the names. To select a non-consecutive list of 
patients, click the cursor at the first name, move the cursor to the next name, then press and 
hold down the Ctrl+right Set key, move the cursor to the next name, then press and hold down 
the Ctrl+right Set key again, etc.  You can also search for patients via the Search key and string. 
Or, Select All Button  from the Patient Menu:
NOTE: You need to use your best judgment when movi ng patients images. If there are lots of images 
or loops, then only move a few patients at a time.
5.) Once you have selected all of the patients to export, press Transfer Button as shown in Figure 4-18 from the Patient Menu.
6.) The progress bar appears as the copy is taking place. Once transfer completed, the exported  patient list will be shown as Figure 4-22.
7.) Press F3 to eject the media. Specify that you want to  finalize the CD-ROM.
Figure 4-21   Source Section
Figure 4-22   Destination Section of Patient Screen