Toshiba Estudio 230 Manual
Have a look at the manual Toshiba Estudio 230 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1 June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES 1 - 19 Area Taiwan Korea Machine version (destination) TWD (110V) KRD (220-240V) Model name e-STUDIO282 e-STUDIO282 Platen cover KA-3511PC Standard RADF MR-3020 MR-3020 Drawer module (for Equipment) Standard Standard Drawer module (for PFP) MY-1021 MY-1021 Slot cover - - ADU MD-0102 MD-0102 PFP KD-1011 KD-1011 LCF KD-1012A4 KD-1012A Finisher (Hanging type) MJ-1022 MJ-1022 Staple cartridge (for MJ-1022) STAPLE-1600 STAPLE-1600 Saddle stitch finisher MJ-1025 MJ-1025 Staple cartridge (for MJ-1025) STAPLE-2000 STAPLE-2000 Hole punch unit MJ-6005E MJ-6005E Bridge kit KN-3520 KN-3520 Job separator MJ-5004 MJ-5004 Offset tray MJ-5005 MJ-5005 Work tray KK-3511 KK-3511 Damp heater Standard Standard Fax board GD-1150TW GD-1150AS 2nd line for Fax board GD-1160TW GD-1160EU-N Wireless LAN module GN-1041 GN-1041 Bluetooth module GN-2010 GN-2010 Antenna GN-3010 GN-3010 PCI slot GO-1060 GO-1060 Scrambler board GP-1040 GP-1040 Printer kit GM-1070 GM-1070 Printer/Scanner kit GM-2070 GM-2070 Scanner kit GM-4070 GM-4070 Data overwrite kit GP-1060 GP-1060 Desk MH-1700 MH-1700 Harness kit for coin controller GQ-1020 GQ-1020 05/11
e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES June 2004 © TOSHIBA TEC 1 - 20 e-STUDIO232/232S Area North America Central and South Amer- ica/Hong Kong Argentina Australia Europe Machine version (destination) NAD (115V) ASD (220-240V) ARD (220-240V) AUD (220-240V) MJD (220-240V) Model name e-STUDIO232 e-STUDIO232 e-STUDIO232 e-STUDIO 232 e-STUDIO232 Platen cover KA-3511PC KA-3511PC KA-3511PC KA-3511PC KA- 3511PC RADF MR-3020 MR-3020 MR-3020 MR-3020 MR-3020 Drawer module (for Equipment) Standard MY-1021 MY-1021 Standard Standard Drawer module (for PFP) MY-1021 MY-1021 MY-1021 MY-1021 MY-1021 Slot cover - Standard Standard - - ADU Standard MD-0102 MD-0102 Standard Standard PFP KD-1011 KD-1011-N KD-1011 KD-1011 KD-1011 LCF KD-1012LT KD-1012A4 KD-1012A4 KD-1012A4 KD-1012A4 Finisher (Hanging type) MJ-1022 MJ-1022 MJ-1022 MJ-1022 MJ-1022 Staple cartridge (for MJ-1022) STAPLE-1600 STAPLE-1600 STAPLE-1600 STAPLE-1600 STAPLE- 1600 Saddle stitch finisher MJ-1025 MJ-1025 MJ-1025 MJ-1025 M J-1025 Staple cartridge (for MJ-1025) STAPLE-2000 STAPLE-2000 STAPLE-2000 STAPLE-2000 STAPLE- 2000 Hole punch unit MJ-6005N MJ-6005E MJ-6005E MJ-6005E MJ-6 005E/F/S Bridge kit KN-3520 KN-3520 KN-3520 KN-3520 KN-3520 Job separator MJ-5004 MJ-5004 MJ-5004 MJ-5004 MJ-5004 Offset tray MJ-5005 MJ-5005 MJ-5005 MJ-5005 MJ-5005 Work tray KK-3511 KK-3511 KK-3511 KK-3511 KK-3511 Damp heater MF-2320U Standard Standard Standard MF-2320E Fax board GD-1150NA GD-1150AS GD-1150AS GD-1150AU GD-115 0EU 2nd line for Fax board GD-1160NA GD-1160EU-N GD-1160EU-N GD-1160EU-N GD-1160EU -N Wireless LAN module GN-1041 GN-1041 GN-1041 GN-1041 GN-1041 Bluetooth module GN-2010 GN-2010 GN-2010 GN-2010 GN-2010 Antenna GN-3010 GN-3010 GN-3010 GN-3010 GN-3010 PCI slot GO-1060 GO-1060 GO-1060 GO-1060 GO-1060 Scrambler board GP-1040 GP-1040 GP-1040 GP-1040 GP-1040 Printer kit GM-1070 GM-1070 GM-1070 GM-1070 GM-1070 Printer/Scanner kit GM-2070 GM-2070 GM-2070 GM-2070 GM-2 070 Scanner kit GM-4070 GM-4070 GM-4070 GM-4070 GM-4070 Data overwrite kit GP-1060 GP-1060 GP-1060 GP-1060 GP-106 0 Desk MH-1700 MH-1700 MH-1700 MH-1700 MH-1700 Harness kit for coin controller GQ-1020 GQ-1020 GQ-1020 GQ-1020 GQ-1020 05/11
1 June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES 1 - 21 Area Asia Saudi Arabia China Machine version (destination) ASU (220-240V) SAD (127V) CND (220-240V) Model name e-STUDIO232 e-STUDIO232 e-STUDIO232 e-STUDIO 232S Platen cover KA-3511PC KA-3511PC Standard Standard RADF MR-3020 MR-3020 MR-3020 MR-3020 Drawer module (for Equipment) MY-1021 MY-1021 Standard Standard Drawer module (for PFP) MY-1021 MY-1021 MY-1021-C MY-1021-C Slot cover KE-2330 KE-2330 - - ADU MD-0102 MD-0102 Standard MD-0102-C PFP KD-1011 KD-1011 KD-1011-C KD-1011-C LCF KD-1012 KD-1012A4 KD-1012A4-C KD-1012A4-C Finisher (Hanging type) MJ-1022 MJ-1022 MJ-1022-C MJ-1022-C Staple cartridge (for MJ-1022) STAPLE-1600 STAPLE-1600 STAPLE-1600 STAPLE-1600 Saddle stitch finisher MJ-1025 MJ-1025 MJ-1025 MJ-1025 Staple cartridge (for MJ-1025) STAPLE-2000 STAPLE-2000 STAPLE-2000 STAPLE-2000 Hole punch unit MJ-6005E MJ-6005E MJ-6005E MJ-6005E Bridge kit KN-3520 KN-3520 KN-3520-C KN-3520-C Job separator MJ-5004 MJ-5004 MJ-5004-C MJ-5004-C Offset tray MJ-5005 MJ-5005 MJ-5005-C MJ-5005-C Work tray KK-3511 KK-3511 KK-3511-C KK-3511-C Damp heater Standard Standard Standard Standard Fax board GD-1150AS GD-1150NA GD-1150C GD-1150C 2nd line for Fax board GD-1160EU-N GD-1160NA GD-1160C GD-1160C Wireless LAN module GN-1041 GN-1041 GN-1041 GN-1041 Bluetooth module GN-2010 GN-2010 GN-2010 GN-2010 Antenna GN-3010 GN-3010 GN-3010 GN-3010 PCI slot GO-1060 GO-1060 GO-1060 GO-1060 Scrambler board GP-1040 GP-1040 GP-1040 GP-1040 Printer kit GM-1070 GM-1070 GM-1070 - Printer/Scanner kit GM-2070 GM-2070 Standard - Scanner kit GM-4070 GM-4070 GM-4070 - Data overwrite kit GP-1060 GP-1060 GP-1060 GP-1060 Desk MH-1700 MH-1700 MH-1700 MH-1700 Harness kit for coin controller GQ-1020 GQ-1020 GQ-1020 GQ-1020 05/11
e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES June 2004 © TOSHIBA TEC 1 - 22 Area Taiwan Korea Machine version (destination) TWD (110V) KRD (220-240V) Model name e-STUDIO232 e-STUDIO232 Platen cover KA-3511PC Standard RADF MR-3020 MR-3020 Drawer module (for Equipment) Standard Standard Drawer module (for PFP) MY-1021 MY-1021 Slot cover - - ADU MD-0102 MD-0102 PFP KD-1011-TW KD-1011 LCF KD-1012A4 KD-1012A4 Finisher (Hanging type) MJ-1022 MJ-1022 Staple cartridge (for MJ-1022) STAPLE-1600 STAPLE-1600 Saddle stitch finisher MJ-1025 MJ-1025 Staple cartridge (for MJ-1025) STAPLE-2000 STAPLE-2000 Hole punch unit MJ-6005E MJ-6005E Bridge kit KN-3520 KN-3520 Job separator MJ-5004 MJ-5004 Offset tray MJ-5005 MJ-5005 Work tray KK-3511 KK-3511 Damp heater Standard Standard Fax board GD-1150TW GD-1150AS 2nd line for Fax board GD-1160TW GD-1160EU-N Wireless LAN module GN-1041 GN-1041 Bluetooth module GN-2010 GN-2010 Antenna GN-3010 GN-3010 PCI slot GO-1060 GO-1060 Scrambler board GP-1040 GP-1040 Printer kit GM-1070 GM-1070 Printer/Scanner kit GM-2070 GM-2070 Scanner kit GM-4070 GM-4070 Data overwrite kit GP-1060 GP-1060 Desk MH-1700 MH-1700 Harness kit for coin controller GQ-1020 GQ-1020 05/11
1 June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES 1 - 23 e-STUDIO202L Area North America Argentina Machine version (destination) NAD (115V) ARD (220-240V) Model name e-STUDIO202L e-STUDIO202L Platen cover KA-3511PC KA-3511PC RADF MR-3020 MR-3020 Drawer module (for Equipment) MY-1021 MY-1021 Drawer module (for PFP) MY-1021 MY-1021 Slot cover Standard Standard ADU MD-0102 MD-0102 PFP KD-1011 KD-1011-N LCF KD-1012LT KD-1012A4 Finisher (Hanging type) MJ-1022 MJ-1022 Staple cartridge (for MJ-1022) STAPLE-1600 STAPLE-1600 Saddle stitch finisher MJ-1025 MJ-1025 Staple cartridge (for MJ-1025) STAPLE-2000 STAPLE-2000 Hole punch unit MJ-6005N MJ-6005E Bridge kit KN-3520 KN-3520 Job separator MJ-5004 MJ-5004 Offset tray MJ-5005 MJ-5005 Work tray KK-3511 KK-3511 Damp heater MF-2320U Standard Fax board GD-1150NA GD-1150AS 2nd line for Fax board GD-1160NA GD-1160EU-N Wireless LAN module GN-1041 GN-1041 Bluetooth module GN-2010 GN-2010 Antenna GN-3010 GN-3010 PCI slot GO-1060 GO-1060 Scrambler board GP-1040 GP-1040 Printer kit GM-1080U GM-1080U Printer/Scanner kit GM-2080U GM-2080U Scanner kit GM-4080U GM-4080U Data overwrite kit GP-1060 GP-1060 Desk MH-1700 MH-1700 Harness kit for coin controller GQ-1020 GQ-1020 05/11
e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES June 2004 © TOSHIBA TEC 1 - 24
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 1 2 2. ERROR CODE AND SELF-DIAGNOSTIC MODE 2.1 Error Code List 2.1.1 Jam One of the following error codes is displayed at th e upper right of the screen while pressing the [CLEAR] button and the digital key [8] simultaneous ly when the “CLEAR PAPER” or “CALL SER- VICE” symbol is blinking. Error code Classification Contents Troubleshooting E010 Paper exit jam Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor. P. 5-1 E020 Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leadi ng edge has reached this sensor. P. 5-1 E030 Other paper jam Power-ON jam: The paper is remai ning on the paper transport path when power is turned ON. P. 5-2 E090 HDD abnormality causes jam: Image data to be printed cannot be prepared. P. 5-3 E110 Paper misfeeding ADU misfeeding (Paper not reach ing the 1st trans- port sensor): The paper which has passed through ADU does not reach the 1st transport sensor during duplex printing. P. 5-15 E120 Bypass misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the bypass tray does not reach the 1st transport sensor. P. 5-16 E130 Upper drawer misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the upper drawer does not reach the 1st transport sensor. P. 5-17 E140 Lower drawer misfeeding (Paper not reaching the 2nd transport sensor): The paper fed from the lower drawer does not reach the 2nd transport sensor. P. 5-18 E150 PFP upper drawer misfeeding (Paper not reaching the PFP upper drawer feed sensor): The paper fed from the PFP upper drawer does not reach the PFP upper drawer feed sensor. P. 5-19 E160 PFP lower drawer misfeeding (Paper not reaching the PFP lower drawer feed sensor): The paper fed from the PFP lower drawer does not reach the PFP lower drawer feed sensor. P. 5-20 E190 LCF misfeeding (Paper not reaching the LCF feed sensor): The paper fed from the LCF does not reach the LCF feed sensor. P. 5-21
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 2 E200 Paper transport jam Upper drawer transport jam ( Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st tran s- port sensor. P. 5-3 E210 Lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st tran s- port sensor. P. 5-3 E220 Lower drawer transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the lower drawer feed sensor. P. 5-4 E270 Bypass transport jam (paper not reaching the re gis- tration sensor): The paper does not reach the regis - tration sensor after it has passed the 1st transpor t sensor. P. 5-5 E280 ADU transport jam (paper not reaching the regis tra- tion sensor): The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing. P. 5-5 E300 PFP upper drawer transport jam (Paper not reach - ing the registration sensor): The paper does not reach the registration sensor after it has passed t he 1st transport sensor. P. 5-3 E310 PFP upper drawer transport jam (Paper not reach - ing the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor. P. 5-4 E320 PFP upper drawer transport jam (Paper not reach - ing the 2nd transport sensor): The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor. P. 5-6 E330 PFP lower drawer transport jam (Paper not reach- ing the registration sensor): The paper does not reach the registration sensor after it has passed t he 1st transport sensor. P. 5-3 E340 PFP lower drawer transport jam (Paper not reach- ing the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the PFP lower drawer feed sensor. P. 5-4 E350 PFP lower drawer transport jam (Paper not reach- ing the 2nd transport sensor): The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor. P. 5-6 E360 PFP lower drawer transport jam (Paper not reach- ing the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sen- sor. P. 5-7 E3C0 LCF transport jam (Paper not reaching the regis tra- tion sensor): The paper does not reach the registra - tion sensor after it has passed the 1st transport sensor. P. 5-3 E3D0 LCF transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the 2nd trans- port sensor. P. 5-4 Error code Classification Contents Troubleshooting
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 3 2 E3E0 Paper transport jam LCF transport jam (Paper not reaching the 2nd transport sensor): The paper does not reach the 2nd transport sensor after it has passed the LCF feed sensor. P. 5-6 E400 Cover open jam Transfer cover open jam: The tran sfer cover has opened during printing. P. 5-22 E410 Front cover open jam: The front cover has opene d during printing. P. 5-23 E420 PFP side cover open jam: The PFP side cover has opened during printing. P. 5-24 E430 ADU open jam: The ADU has opened during print- ing. P. 5-25 E440 Side cover open jam: The side cover has opened during printing. P. 5-25 E450 LCF side cover open jam: The LCF side cover has opened during printing. P. 5-26 E480 Bridge unit open jam: The bridge unit has opene d during printing. P. 5-26 E490 Job separator cover open jam: The job separator cover has opened during printing. P. 5-27 E491 Offset tray cover open jam: The offset tray cov er has opened during printing. P. 5-27 E510 Paper transport jam (ADU section) Stop jam in the ADU: The paper does not reach the ADU exit sensor after it has passed the ADU entrance sensor. P. 5-8 E520 Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section. P. 5-9 E550 Other paper jam Paper remaining jam on the trans port path: The paper is remaining on the transport path when print - ing is finished (caused by a multiple paper feeding ).P. 5-10 Error code Classification Contents Troubleshooting
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 4 E711 RADF jam Jam not reaching the original length sen sor: The original fed from the original feeding tray does no t reach the original length sensor. P. 5-28 E712 Jam not reaching the registration sensor: The or igi- nal fed from the original feeding tray does not rea ch the registration sensor. P. 5-28 E713 Stop jam at the original length sensor: The tra iling edge of the original does not pass the original length sensor after its leading edge has reached this sensor. P. 5-28 E714 Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray. P. 5-29 E721 Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side). P. 5-29 E722 Jam not reaching the exit sensor (during scanni ng): The original which passed the read sensor does not reach the exit sensor when it is transported from t he scanning section to exit section. P. 5-30 E723 Jam not reaching the reverse sensor (during sca n- ning): The original which passed the read sensor does not reach the reverse sensor when it is trans- ported from the scanning section to reverse section .P. 5-30 E724 Stop jam at the registration sensor: The trailin g edge of the original does not pass the registration sensor after its leading edge has reached this sen- sor. P. 5-30 E725 Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its le ad- ing edge has reached this sensor. P. 5-31 E726 Transport/exit signal reception jam: RADF recei ves the transport/exit reception signal from the equip- ment when no original is at the exposure waiting position. P. 5-31 E731 Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its le ad- ing edge has reached this sensor. P. 5-32 E741 Stop jam at the reverse sensor: The trailing ed ge of the original does not pass the reversal sensor after its leading edge has reached this sensor. P. 5-32 E742 Jam not reaching the reverse sensor (during reverse feeding): The leading edge of the original does not reach the reverse sensor when original is fed from the reverse section. P. 5-33 E743 Jam not reaching the exit sensor (during revers e feeding): The original does not reach the exit sen- sor after it has passed the reverse sensor when the original is exited from the reverse section. P. 5-33 E860 RADF jam access cover open: The RADF jam access cover has opened during RADF operation. P. 5-34 E870 RADF open jam: RADF has opened during RADF operation. P. 5-34 Error code Classification Contents Troubleshooting