Toshiba Estudio 230 Manual

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 85
2
Notes:   The digit after the hyphen in “Code” of the follow ing table is a sub code.
 e-STUDIO200L/230/280: In “RAM”, the NVRAM of the bo ard in which the data of each code
is stored is indicated. “M” stands for the LGC boar d, “SYS” and
 “UTY” stands for the SYS board and “NIC” stands fo r the NIC
board.
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
200 General Date and time setting ALL -  - Year/month/date/day/
hour/minute/second 
Example:03 07 0 13 13 27 48 
“Day” - “0” is for  
“Sunday”. Pro- 
ceeds Monday 
through Saturday  
from “1” to “6”. 5
201 General Destination selection ALL EUR: 0 UC: 1
JPN: 2  M 0: EUR
1: UC 
2: JPN 1
202 User  interface Counter installed externally ALL 0
M 0: No external counter
1: Coin controller 
2: Copy key card 
3: Key copy counter 1
203 General Line adjustment mode ALL 0 M 0: For factory shipment
1: For line 
* Field: “0” must be selected 1
204 User  interface Auto-clear timer setting ALL 3
SYS Timer to return the 
equipment to the 
default settings when  
the [START] button is  
not pressed after the 
function and the mode  
are set 
0: Not cleared
1 to 10: Set number x  
15 sec. 1
205 User  interface Auto power save mode  
timer setting ALL EUR: 11
UC: 11
JPN: 6
Others:  11
 SYS Timer to automatically 
switch to the Auto  
power save mode when 
the equipment has not  
been used 
0: Invalid 6: 3min.
7: 4min. 8: 5min. 
9: 7min. 
10: 10min.
11: 15min. 
12: 20min. 
13: 30min.
14: 45min. 
15: 60min. 1
05/12 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 86
206 User 
interface Auto Shut Off Mode timer  
setting (Auto Shut Off  
Mode/Sleep Mode) ALL Refer to 
content SYS Timer to turn OFF the 
power or to enter the 
Sleep Mode automati- 
cally when the equip-
ment has not been  
used 
(Refer to 08-601)
0: 3min. 1: 5min. 
2: 10min. 3: 15min. 
4: 20min. 5: 25min. 
6: 30min. 7: 40min. 
8: 50min. 9: 60min. 
10: 70min. 
11: 80min. 
12: 90min. 
13: 100min.
14: 110min. 
15: 120min. 
16: 150min.
17: 180min. 
18: 210min. 
19: 240min.
20: Not used
 
The models except  
e-STUDIO200L:EUR: 7   UC: 9   
JPN: 0   Others: 9
e-STUDIO200L: EUR: 7   UC: 6   
JPN: 0   Others: 6 1
207 User  interface Highlighting display on  
LCD ALL 0
 SYS 0: Black letter on white 
background
1: White letter on black  background 1
209 User  interface Default setting of filing for- 
mat when E-mailing ALL 0
 SYS 0: TIFF (Multi)
1: PDF 1
210 Paper  feeding Paper size (A6-R) feeding/ 
widthwise direction PRT 148/105
 M 10
219 User  interface Default setting of filing for-
mat when storing files SCN 0
 SYS 0: TIFF (Multi)
1: PDF  2: Not used 
3: TIFF (Single) 1
220 User  interface Language displayed at  
power-ON ALL EUR: 0
UC: 0
JPN: 5  SYS 0: Language 1
1: Language 2
2: Language 3 
3: Language 4 
4: Language 5
5: Language 6 
6: Language 7 1
221 User  interface Language selection in UI  
data at Web power ON ALL EUR: 0
UC: 0
JPN: 5  SYS 0: Language 1
1: Language 2 
2: Language 3 
3: Language 4 
4: Language 5 
5: Language 6 
6: Language 7 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 87
2
224 Paper  feeding Paper size for bypass feed PPC UNDEF SYS Press the butto
n on the 
LCD to select the size. 9
225 Paper  feeding Paper size for upper  
drawer ALL EUR: A4
UC: LT
JPN: A4 M Press the button on the 
LCD to select the size. 9
226 Paper  feeding Paper size for lower  
drawer ALL EUR: A3
UC: LD
JPN: A3 M Press the button on the 
LCD to select the size. 9
227 Paper  feeding Paper size for PFP upper 
drawer ALL EUR:
A4-R
UC: LT-R
JPN:
A4-R M Press the button on the 
LCD to select the size. 9
228 Paper  feeding Paper size for PFP lower  
drawer ALL EUR: A4
UC: LG
JPN: B4 M Press the button on the 
LCD to select the size. 9
229 Paper  feeding Paper size (A3) feeding/ 
widthwise direction ALL 420/297
 M 10
230 Paper  feeding Paper size (A4-R) feeding/ 
widthwise direction ALL 297/210
 M 10
231 Paper  feeding Paper size (A5-R) feeding/
widthwise direction ALL 210/148
 M 10
232 Paper  feeding Paper size (B4) feeding/ 
widthwise direction ALL 364/257
 M 10
233 Paper  feeding Paper size (B5-R) feeding/ 
widthwise direction ALL 257/182
 M 10
234 Paper  feeding Paper size (LT-R) feeding/
widthwise direction ALL 279/216
 M 10
235 Paper  feeding Paper size (LD) feeding/ 
widthwise direction ALL 432/279
 M 10
236 Paper  feeding Paper size (LG) feeding/ 
widthwise direction ALL 356/216
 M 10
237 Paper  feeding Paper size (ST-R) feeding/
widthwise direction ALL 216/140
 M 10
238 Paper  feeding Paper size (COMPUTER)  
feeding/widthwise direction ALL 356/257
 M 10
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 88
239 Paper 
feeding Paper size (FOLIO) feed- 
ing/widthwise direction ALL 330/210
 M 10
240 Paper  feeding Paper size (13” LG) feed- 
ing/widthwise direction ALL 330/216
 M 10
241 Paper  feeding Paper size (8.5”X8.5”)  
feeding/widthwise direction ALL 216/216
 M 10
242 Paper  feeding Paper size (Non-standard) 
feeding/widthwise direction ALL 432/279
 SYS 10
243 Paper  feeding Memory 1 
Paper size (bypass feed- 
ing/non-standard type)  
feeding/widthwise direction ALL 148/100
 SYS Registers the paper 
size of bypass feed  
(non-standard type) into  
[MEMORY 1]. 10
244 Paper  feeding Paper size (8K) feeding/ 
widthwise direction ALL 390/270
 M 10
245 Paper  feeding Paper size (16K-R) feed-
ing/widthwise direction ALL 270/195
 M 10
247 Paper  feeding Memory 2 
Paper size (bypass feed- 
ing/non-standard type)  
feeding/widthwise direction ALL 148/100
 SYS Registers the paper 
size of bypass feed  
(non-standard type) into  
[MEMORY 2]. 10
248 Paper  feeding Memory 3 
Paper size (bypass feed-
ing/non-standard type)  
feeding/widthwise direction ALL 148/100
 SYS Registers the paper 
size of bypass feed  
(non-standard type) into  
[MEMORY 3]. 10
249 Paper  feeding Memory 4 
Paper size (bypass feed- 
ing/non-standard type)  
feeding/widthwise direction ALL 148/100
 SYS Registers the paper 
size of bypass feed  
(non-standard type) into  
[MEMORY 4]. 10
250 Mainte- nance Service technician tele- 
phone number ALL 0
 SYS A telephone number 
can be entered up to 32  
digits. Use the [Monitor/ 
Pause] button to enter a  
hyphen (-). 11
251 Mainte- nance Setting value of PM 
counter ALL Refer to 
content
 M 
e-STUDIO200L 
UC, EUR: 64,000 
JPN: 0
e-STUDIO 230 
UC, EUR: 74,000 
JPN: 0
e-STUDIO 280 
UC, EUR: 90,000 
JPN: 0 1
252 Mainte- nance Current value of PM 
counter Display/0 clearing ALL 0
 M Counts up when the 
registration sensor is  
ON. 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 89
2
253 Mainte- nance Error history display ALL - SYS Displaying of the lates
t 
20 errors data 2
254 Paper  feeding LT  A4/LD  A3 PRT 0
SYS Sets whether the data is 
printed on the different  
but similar size paper or  
not when the paper of  
corresponding size is  
not available. 
0: Valid (The data is printed on A4/A3 
when LT/LD is 
selected or vice  
versa.)
1: Invalid (The mes-
sage to use the 
selected paper size  
is displayed.) 1
255 Paper  feeding PFP/LCF installation ALL 0
M 0: Automatic
1: PFP single-drawer type installed
2: PFP dual-drawer 
type installed
3: LCF installed 
4: Not installed 1
256 Paper  feeding Paper size setting /LCF ALL EUR: A4
UC: LT
JPN: A4 M Press the button on the 
LCD to select the size. 9
257 Counter Counter copy ALL - - 1) Electrical counter  
 Backup counter
2) Backup counter   
Electrical counter
(P. 2-150 Fig. 2-4) -
258 Mainte- nance FSMS acceptance ALL 1
SYS Sets whether the FSMS 
connection is accepted  
or not. 
0: Prohibited 
1: Accepted (USB nor-mal connection)
2: Accepted (USB 
forcible connection) 1
259 Network Storage period trial and pri- vate PRT 14
 SYS 0: No limits
1 to 30: 1 to 30 days 1
260 Network Web data retention period SCN 10 SYS When a certain period 
of time has passed  
without operation after 
accessing TopAccess,  
the data being regis- 
tered is automatically 
reset. This period is set  
at this code. 
(Unit: Minute) 1
263 User  interface Administrators password
(Maximum 10 digits) ALL 123456
 - The password can be 
entered in alphabets  
and figures (A-Z, a-z, 0- 
9) within 10 digits. 11
264 Network File retention period SCN 30 SYS 0: No limits
1 to 999: 1 to 999 days 1
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 90
265 Network Maximum data capacity at 
E-mailing SCN 30
 SYS 2 to 30 M bytes 1
266 Network Maximum data capacity at  Internet FAX ALL 30
 SYS 2 to 30 M bytes 1
267 Elec- tronic Fil-
ing Full guarantee of docu- 
ments in Electronic Filing 
when HDD is full ALL 0
 SYS Sets the file retention 
level when editing the 
files in the Electronic  
Filing (at CutDoc/Save- 
Doc command execu- 
tion). 
0: Not full retained 
1: Fully retained - Retains the source  
file until CutDoc/ 
SaveDoc command 
is completed.
* The file is not 
deleted even if the 
HDD has become  
full during the exe- 
cution of command 
when “1” is set. 1
270 Elec- tronic Fil-ing Default value for user box 
retention period
ALL 0
 SYS Sets the data retention 
period when creating a  
user box. 
0: Not deleted 
1 to 999: Retention  
period (Unit: Day) 1
271 General Warning display of the  HDD capacity to be filled ALL 90
 SYS Sets the percentage of 
the HDD capacity filled  
which warning is dis- 
played 
0 to 100: 0 to 100% 1
272 Scanning Notification setting of E- mail saving time limit ALL 3
 SYS Sets the days left the 
notification of E-mail  
saving time limit  
appears
0 to 99: 0 to 99 days 1
273 Scanning Default setting of partial  size when transmitting E-
mail ALL 0
 SYS Sets the default value 
for the partial size of E-
mail to be transmitted 
when creating a tem- 
plate. 
0: Not divided
1: 64 2: 128 
3: 256 4: 512 
5: 1024 
6: 2048 (Unit: KB) 1
274 FAX Default setting of page by  page when transmitting  
Internet FAX FAX 0
 SYS Sets the default value 
for the page by page of 
Internet FAX to be 
transmitted when creat- 
ing a template. 
0: Not divide 1: 128
2: 512 3: 1024 
4: 2048 (Unit: KB) 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 91
2
276 User  interface Default setting for density  
adjustment SCN 0
 SYS 0: Automatic density
1: Step -5 
2: Step -4 
3: Step -3
4: Step -2 
5: Step -1 
6: Step 0 (center) 
7: Step +1 
8: Step +2 
9: Step +3 
10: Step +4 
11: Step +5 
(1 to 11: Manual den- 
sity) 1
281 User  interface Default setting of resolution SCN 1
SYS 0: 150 dpi 1: 200 dpi
2: 300 dpi 3: 400dpi
4: 600 dpi 1
283 User  interface Default setting of original 
mode SCN 0
 SYS 0: Text
1: Text/Photo 
2: Photo 1
284 User  interface Default setting of scanning  
mode SCN 0
 SYS 0: Single 1: Book
2: Tablet 1
285 User  interface Default setting of rotation 
angle of original SCN 0
 SYS 0: 0 degree
1: 90 degrees
2: 180 degrees 
3: 270 degrees 1
286 User  interface Default setting of original  
paper size SCN 0
 SYS 0: Automatic
1: A3 2: A4
3: LD 4: LT 
5: A4-R 6: A5-R 
7: LT-R 8: LG
9: B4 10: B5 
11: ST-R 12: COMP 
13: B5-R 14: FOLIO
15: 13”LG 
16: 8.5” x 8.5” 
18: A6-R 
19: Size mixed 
20: 8K 21: 16K  
22: 16K-R 1
288 General Searching interval of delet- ing expired flies ALL 12
 SYS Sets the search inter-
val of expired files.  
Deletes if expired file is  
found.
(Unit: Hour) 1
290 Network Raw printing job (Duplex) PRT 1 SYS 0: Valid
1: Invalid 1
291 Network Raw printing job (Paper size) PRT EUR: 6
UC: 2
JPN: 6
 SYS 0: LD 1: LG
2: LT 3: COMP
4: ST 5: A3 
6: A4 7: A5 
8: A6 9: B4
10: B5 11: FOLIO 
12: 13”LG 
13: 8.5” x 8.5” 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 92
292 Network Raw printing job
(Paper type) PRT 0
 SYS 0: Plain paper
1: Thick paper 1 
2: Thick paper 2 
3: Thick paper 3
4: OHP film 1
293 Network Raw printing job (Paper direction) PRT 0
 SYS 0: Portrait
1: Landscape 1
294 Network Raw printing job (Staple) PRT 1 SYS 0: Valid
1: Invalid 1
295 Network Raw printing job (receiving tray) PRT 0
 SYS 0: Inner tray
1: Finisher tray 1 
2: Finisher tray 2 
3: Not used 
4: Job Separator upper tray
5: Job Separator lower 
tray
* The settings 4 and 5 
are effective only 
when the Job Sepa- 
rator (MJ-5004) is  
installed. 1
296 Network Raw printing job (Number of form lines) PRT 1200
 SYS Sets the number of 
form lines from 5 to 
128. (A hundredfold of  
the number of form  
lines is defined as the 
setting value.) 1
297 Network Raw printing job (PCL font pitch) PRT 1000
 SYS Sets the font pitch from 
0.44 to 99.99. (A hun- 
dredfold of the font  
pitch is defined as the  
setting value.) 1
298 Network Raw printing job (PCL font size) PRT 1200
 SYS Sets the font size from 
4 to 999.75. (A hun- 
dredfold of the font size  
is defined as the setting  
value.) 1
299 Network Raw printing job (PCL font number) PRT 0
 SYS Sets the PCL font num-
ber. 1
300 User  interface Maximum number of copy  
volume (MAX9) PPC 0
 SYS 0: 999 1: 99
2: 9 1
302 User  interface Original counter display ALL EUR: 2
UC: 0
JPN: 0  SYS Sets whether the origi-
nal counter is dis- 
played or not. 
0: Not displayed 
2: Displayed 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 93
2
305-0 Counter Number of  output pages  
in copier func- 
tionA3 PPC 0
SYS Counts the output 
pages in the copier  
function for each paper  
size according to the 
setting for the count  
setting of large-sized  
paper (08-352) and the 
definition setting of  
large-sized paper (08- 
353). 4
305-1 A4 
305-2 A5
305-3 A6 
305-4 B4 
305-5 B5 
305-6 FOLIO 
305-7 LD 
305-8 LG 
305-9 LT
305-10 ST
305-11 COMP
305-12 13”LG
305-13 8.5” x 8.5” 
305-14 16K 
305-15 8K
305-16 Others 306-0 Counter Number of  output pages  
in printer func- 
tionA3 PRT 0
SYS Counts the output 
pages in the printer  
function for each paper  
size according to the  
setting for the count 
setting of large-sized  
paper (08-352) and the  
definition setting of 
large-sized paper (08- 
353). 4
306-1 A4 
306-2 A5 
306-3 A6 
306-4 B4 
306-5 B5 
306-6 FOLIO 
306-7 LD 
306-8 LG
306-9 LT
306-10 ST 306-11 COMP
306-12 13”LG
306-13 8.5” x 8.5” 
306-14 16K 
306-15 8K 
306-16 Others Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 94
307-0 Counter Number of 
output pages  
at list print  
modeA3 PRT 0
SYS Counts the output 
pages at the list print  
mode for each paper  
size according to the 
setting for the count  
setting of large-sized  
paper (08-352) and the 
definition setting of  
large-sized paper (08- 
353). 4
307-1 A4 
307-2 A5
307-3 A6 
307-4 B4 
307-5 B5 
307-6 FOLIO 
307-7 LD 
307-8 LG 
307-9 LT
307-10 ST
307-11 COMP
307-12 13”LG
307-13 8.5” x 8.5” 
307-14 16K 
307-15 8K
307-16 Others 308-0 Counter Number of  output pages  
in FAX func- 
tionA3 FAX 0
SYS Counts the output 
pages in the FAX func- 
tion for each paper size  
according to the setting  
for the count setting of 
large-sized paper (08- 
352) and the definition  
setting of large-sized 
paper (08-353). 4
308-1 A4 
308-2 A5 
308-3 A6 
308-4 B4 
308-5 B5 
308-6 FOLIO 
308-7 LD 
308-8 LG
308-9 LT
308-10 ST 308-11 COMP
308-12 13”LG
308-13 8.5” x 8.5” 
308-14 16K 
308-15 8K 
308-16 Others Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure