Toshiba Estudio 230 Manual
Have a look at the manual Toshiba Estudio 230 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 205 2 1013 Network Availability of NCP Burst ALL 1 NIC 1: Available 2: Not available 12 1014 Network Availability of AppleTalk ALL 1 NIC 1: Available 2: Not available 12 1015 Network Zone setting of AppleTalk ALL * NIC Maximum 32 letters *: Wildcard character 12 1016 Network Availability of LDAP ALL 1 NIC 1: Available 2: Not available 12 1017 Network Availability of DNS ALL 1 NIC 1: Available 2: Not available 12 1018 Network IP address to DNS server (Primary) ALL - NIC 000.000.000.000- 255.255.255.255 (Default value 000.000.000.000) 12 1019 Network IP address to DNS server (Secondary) ALL - NIC 000.000.000.000- 255.255.255.255 (Default value 000.000.000.000) 12 1020 Network DDNS Desired level ALL 1 NIC 1: Invalid 2: Via DHCP 3: Insecure DDNS 4: Secure DDNS 5: Multi-secure DDNS 12 1023 Network NetBios name ALL MFP_ serialUTY Maximum 15 letters The Network-related serial number of the equipment appears at “serial“ 12 1024 Network Name of WINS server or IP address (Primary) ALL - UTY 000.000.000.000- 255.255.255.255 (Default value 000.000.000.000) 12 1025 Network Name of WINS server or IP address (Secondary) ALL - UTY 000.000.000.000- 255.255.255.255 (Default value 000.000.000.000) 12 1026 Network Availability of Bindery ALL 1 NIC 1: Available 2: Not available 12 1027 Network Availability of NDS ALL 1 NIC 1: Available 2: Not available 12 1028 Network Directory service context ALL - NIC Maximum 1 27 letters 12 1029 Network Directory service tree ALL - NIC Maximum 47 l etters 12 1030 Network Availability of HTTP server ALL 1 NIC 1: Available 2: Not available 12 1031 Network Port number to NIC HTTP server ALL 80 NIC 12 1032 Network Port number to system HTTP server ALL 8080 SYS 1 1037 Network Availability of SMTP client ALL 1 NIC 1: Available 2: Not available 12 1038 Network FQDN or IP address to SMTP server ALL - NIC Maximum 128 Bytes 12 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 206 1039 Network TCP port number of SMTP client ALL 25 NIC 12 1040 Network Availability of SMTP server ALL 1 UTY 1: Available 2: Not available 12 1041 Network TCP port number of SMTP server ALL 25 UTY 12 1042 Network E-mail box name to SMTP server ALL - UTY Maximum 192 letters 12 1043 Network Availability of Offramp ALL 2 UTY 1: Available 2: Not available 12 1044 Network Offramp security ALL 1 UTY 1: Available 2: Not available 12 1045 Network Printing at Offramp ALL 1 UTY 1: Available 2: Not available 12 1046 Network Availability of POP3 clients ALL 1 NIC 1: Available 2: Not available 12 1047 Network FQDN or IP address to POP3 server ALL - NIC Maximum 128 Bytes 12 1048 Network Types of POP3 server ALL 1 NIC 1: Automatic 2: POP3 3: APOP 12 1049 Network Login name to POP3 server ALL - NIC Maximum 96 letters 12 1050 Network Login password to POP3 ALL - NIC Maximum 96 letters 12 1051 Network E-mail reception interval (Unit: Minute) ALL 5 NIC 12 1052 Network TCP port number of POP3 client ALL 110 NIC 12 1055 Network TCP port number of FTP client ALL 21 UTY 12 1057 Network Login name to FTP server ALL - SYS Maximum 3 1 letters 11 1058 Network Login password to FTP server ALL - SYS Maximum 31 letters 11 1059 Network Availability of FTP server ALL 1 NIC 1: Available 2: Not available 12 1060 Network TCP port number of FTP server ALL 21 UTY 12 1061 Network Login name to FTP client ALL - SYS Maximum 3 1 letters 11 1062 Network Login password to FTP cli- ent ALL - SYS Maximum 31 letters 11 1063 Network MIB function ALL 1 NIC 1: Valid 2: Invalid 12 1065 Network Setting of read Community ALL public NIC Max imum 31 letters 12 1066 Network Setting of read/Write Com- munity ALL private NIC Maximum 31 letters 12 1067 Network Authentication TRAP func- tion ALL 1 NIC 1: Valid 2: Invalid 12 1068 Network ALERTS TRAP function ALL 1 NIC 1: Valid 2: Invalid 12 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 207 2 1069 Network TRAP destination IP address ALL - UTY 000.000.000.000- 255.255.255.255 (Default value 000.000.000.000) 12 1070 Network Community setting of TRAP (via IP) ALL public NIC Maximum 31 letters 12 1073 Network Availability of Raw/TCP ALL 1 NIC 1: Valid 2: Invalid 12 1074 Network TCP port number of Raw ALL 9100 NIC 12 1075 Network Availability of LPD client ALL 1 NIC 1: Valid 2: Invalid 12 1076 Network TCP port number of LPD ALL 515 NIC 12 1077 Network LPD queue name ALL - NIC Maximum 31 letters 1 2 1078 Network Availability of IPP ALL 1 NIC 1: Valid 2: Invalid 12 1079 Network Availability of IPP port number “80” ALL 1 NIC 1: Valid 2: Invalid 12 1080 Network TCP port number of IPP ALL 631 NIC 12 1081 Network IPP printer name ALL MFP_ serialNIC Maximum 127 letters The Network-related serial number of the equipment appears at “serial“ 12 1082 Network IPP printer location ALL - NIC Maximum 127 l etters 12 1083 Network IPP printer information ALL - NIC Maximum 12 7 letters 12 1084 Network IPP printer information (more) ALL - NIC Maximum 127 letters 12 1085 Network Installer of IPP printer driver ALL - NIC Maximum 127 letters 12 1086 Network IPP printer “Make and Model” ALL - NIC Maximum 127 letters 12 1087 Network IPP printer information (more) MFGR ALL - NIC Maximum 127 letters 12 1088 Network IPP message from opera- tor ALL - NIC Maximum 127 letters 12 1089 Network Availability of FTP print ALL 1 NIC 1: Available 2: Not available 12 1090 Network Printer user name of FTP ALL print NIC Maximu m 31 letters 12 1091 Network Printer user password of FTP ALL - NIC Maximum 31 letters 12 1092 Network TCP port number to FTP print server ALL 21 NIC 12 1093 Network Login name to Novell print server ALL MFP_ serial NIC Maximum 47 letters The Network-related serial number of the equipment appears at “serial“ 12 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 208 1094 Network Login password to Novell print server ALL - NIC Maximum 31 letters 12 1095 Network Name of SearchRoot server ALL - NIC Maximum 31 letters 12 1096 Network Scan rate setting of print queue ALL 5 NIC Unit: Second 12 1097 Network Page number limitation for printing text of received E- mail ALL 5 UTY 12 1098 Network MDN return mail setting when receiving E-mail ALL 2 UTY 1: Valid 2: Invalid 12 1099 Network Trap destination of IPX ALL - UTY Maximum 24 letters (Valid from 0 to 9 and from A to F) 12 1100 Network Method of SMTP server authentication ALL 5 NIC 1: Disable 2: Plain 3: Login 4: Cram-MD5 5: Digest MD5 6: Kerberos 10: Auto 12 1101 Network Login name for SMTP server authentication ALL - NIC Maximum 64 letters 12 1102 Network Login password for SMTP server authentication ALL - NIC Maximum 64 letters 12 1103 Network Rendezvous setting ALL 1 NIC 1: Valid 2: Invalid 12 1104 Network Link local host name ALL MFP_ serialNIC Maximum 127 letters The Network-related serial number of the equipment appears at “serial“ 12 1105 Network Service name setting ALL Refer to contentNIC Maximum 63 letters The Network-related serial number of the equipment appears at “serial“ e-STUDIO232: TOSHIBA e- STUDIO232_serial e-STUDIO282: TOSHIBA e- STUDIO282_serial 12 1112 Network Host name ALL MFP_seri alNIC Maximum 63 letters The Network-related serial number of the equipment appears at “serial“ 12 1113 Network Windows domain No.1 of user authentication ALL - UTY Maximum 128 letters 12 1114 Network Sending mail text of Inter- netFAX ALL 1 SYS 0: Invalid (Not sending the mail text) 1: Valid (Sending the mail text) 1 1117 Network SMB time-out period ALL 300 SYS Unit: Second 1 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 209 2 1118 General Clearing of TAT partition ALL - SYS 3 1119 Network Initialization of NIC infor- mation ALL - - Initializes only the infor- mation of the Network setting items. 3 1121 Network PDC (Primary Domain Controller) name ALL - UTY Maximum 128 letters 12 1122 Network BDC (Backup Domain Controller) name ALL - UTY Maximum 128 letters 12 1123 Network NT domain ON/OFF set- ting ALL 4 UTY 3: ON (Domain selected) 4: OFF (Work group selected) 12 1124 Network Workgroup name ALL work- groupUTY Maximum 15 letters 12 1125 General Data writing of address book data import (overwriting method) ALL 0 SYS 0: Invalid 1: Valid 1 1126 Counter Validity of interrupt copy- ing when external counters are installed ALL 0 SYS 0: Invalid 1: Valid 1 1128 Network NetwareUserAuthTree Name1 ALL - UTY Maximum 47 letters 12 1129 Network NetwareUserAuthContext Name1 ALL - UTY Maximum 127 letters 12 1130 User interface Job Build Function ALL 1 SYS Sets the Job Build Function. 0: Invalid 1: Valid 1 1131 User interface Maximum number of time job build performed ALL 2000 SYS Sets the maximum number of time a job build has been per- formed. 5-2000: 5 to 2000 times 1 1132 General Default screen selection of the User Function menu ALL 1 SYS Selects the default screen when entering the User Function menu by pressing the [USER FUNCTIONS] button. 0: ADDRESS 1: COUNTER 1 1133 Paper feeding Feeding direction setting of envelope ALL 0 SYS Sets the feeding direc- tion of envelopes. 0: Envelope flap comes on its trailing edge (front side of the equipment) 1: Envelope flap comes on its leading edge (rear side of the equipment) 1 1134 Network NetwareUserAuthTree Name2 ALL - UTY Maximum 47 letters 12 1135 Paper feeding Default setting of drawers (Printer/BOX) PRT 1 SYS 1: LCF 2: Upper drawer 3: Lower drawer 4: PFP upper drawer 5: PFP lower drawer 1 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 05/11
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 210 1136 Network Number of lines simulta- neously connectable when using SMB ALL 8 SYS 1 1137 Network Memory partition size when using Samba ALL 12 SYS 8-20 M bytes 1 1138 Network LDAP search method set- ting ALL 0 SYS Sets the search method when performing a LDAP search. 0: Partial match 1: Prefix match 2: Suffix match 3: Full match 1 1139 Network LDAP authentication set- ting ALL 0 SYS 0: Not authenticated 1: Authenticated 1 1140 User interface Restriction of the template function with the adminis- trator privilege ALL 0 SYS Selects the restriction of the template function usage setting. 0: No restriction 1: Only available with the administrator privilege. 1 1141 Network Display of MAC address ALL - SYS (**:**:**:** :**:**) The address is dis- played as above (6-byte data is divided by a colon at every 2 bytes). 2 1143 Network NetwareUserAuthContext Name2 ALL - UTY Maximum 127 letters 12 1144 Network NetwareUserAuthTree Name3 ALL - UTY Maximum 47 letters 12 1145 Mainte- nance (Remote) Counter notification Remote FAX setting ALL - SYS Maximum 32 digits Enter hyphen with the [MONITOR/PAUSE] button. 11 1148 Network NetwareUserAuthContext Name3 ALL - UTY Maximum 127 letters 12 1149 General Enhanced bold for PCL6 ALL 0 SYS 0:OFF 1:ON 1 1372 Counter Heater and energizing time accumulating counter Dis- play/0 clearing ALL 0 M Counts up the heater control time accumu- lated (when power of the equipment is ON) but does not count at the Sleep Mode. When the counter value of the fuser roller is cleared, this counter value is also cleared in sync at the PM support mode. 1 1376 Counter Toner cartridge drive counter ALL 0 M Counts the rotation number of the toner cartridge. 1 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 05/11
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 211 2 1378 Counter Counter for period of time fuser unit is at ready tem- perature ALL 0 M Counts up the heater control time accumu- lated (when the equip- ment is at ready status). When the counter value of the fuser roller is reset, this counter is also reset in sync at the PM support mode. 1 1380 Counter Counter for period of time fuser unit is at printing tem- perature ALL 0 M Counts up the heater control time accumu- lated (during printing). When the counter value of the fuser roller is reset, this counter is also reset in sync at the PM support mode. 1 1382 Counter Counter for period of time fuser unit is at energy sav- ing temperature/Counter reset ALL 0 M Counts up the heater control time accumu- lated (when the equip- ment is in the Energy Saving Mode). When the counter value of the fuser roller is reset, this counter is also reset in sync at the PM support mode. 1 1385 Image process-ing Number of output pages (Thick paper 1) ALL 0 M Counts up when the registration sensor is ON. When the counter value of the fuser roller is cleared, this counter value is also cleared in sync at the PM support mode. 1 1386 Image process-ing Number of output pages (Thick paper 2) ALL 0 M Counts up when the registration sensor is ON. When the counter value of the fuser roller is cleared, this counter value is also cleared in sync at PM support mode. 1 1387 Image process- ing Number of output pages (Thick paper 3) ALL 0 M Counts up when the registration sensor is ON. When the counter value of the fuser roller is cleared, this counter value is also cleared in sync at PM support mode. 1 1388 Image process- ing Number of output pages (OHP film) ALL 0 M Counts up when the registration sensor is ON. When the counter value of the fuser roller is cleared, this counter value is also cleared in sync at PM support mode. 1 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 05/11
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 212 1390 Paper feeding Feeding retry counter (upper drawer) ALL 0 M Counts the number of times of the feeding retry from the upper drawer. 1 1391 Paper feeding Feeding retry counter (lower drawer) ALL 0 M Counts the number of times of the feeding retry from the lower drawer. 1 1392 Paper feeding Feeding retry counter (PFP upper drawer) ALL 0 M Counts the number of times of the feeding retry from the PFP upper drawer. 1 1393 Paper feeding Feeding retry counter (PFP lower drawer) ALL 0 M Counts the number of times of the feeding retry from the PFP lower drawer. 1 1394 Paper feeding Feeding retry counter (bypass feed) ALL 0 M Counts the number of times of the feeding retry from the bypass tray. 1 1395 Paper feeding Feeding retry counter (LCF) ALL 0 M Counts the number of times of the feeding retry from the LCF. 1 1396 Paper feeding Feeding retry counter upper limit value (Upper drawer) ALL 0 M When the number of feeding retry (08-1390 to 08-1395) exceeds the setting value, the feeding retry will not be performed subse- quently. In case “0” is set as a setting value, however, the feeding retry continues regard- less of the counter set- ting value. 1 1397 Paper feeding Feeding retry counter upper limit value (Lower drawer) ALL 0 M 1 1398 Paper feeding Feeding retry counter upper limit value (PFP upper drawer) ALL 0 M 1 1399 Paper feeding Feeding retry counter upper limit value (PFP lower drawer) ALL 0 M 1 1400 Paper feeding Feeding retry counter upper limit value (Bypass feed) ALL 0 M 1 1401 Paper feeding Feeding retry counter upper limit value (LCF) ALL 0 M 1 1410 Counter Counter for period of toner cartridge rotation time ALL 0 M Counts up the period of rotation time of the toner cartridge. 1 1411 Counter Counter for envelope ALL 0 M Counts up when the registration sensor is ON. When the counter value of the fuser roller is reset, this counter is reset in sync at the PM support mode. 1 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 05/11
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 213 2 1422 Data overwrite kit HDD data overwriting type setting ALL 0 SYS Select the type of the overwriting level; LOW, MEDIUM, or HIGH for deleting HDD data. (This setting is enabled only when the GP-1060 is installed.) 0: LOW 1: MEDIUM 2: HIGH 1 1424 Data overwritekit HDD data clearing type setting (forcible clearing) ALL 0 SYS Select the type of the overwriting level; LOW, MEDIUM, or HIGH for deleting HDD data. (This setting is enabled only when the GP-1060 is installed.) 0: LOW 1: MEDIUM 2: HIGH 1 1426 Data overwrite kit Forcible HDD data clearing ALL - - HDD data is cleared in the procedure set in 08- 1424. * This setting is enabled only when the GP-1060 is installed. 3 1427 Data overwritekit Forcible NVRAM data all clearing ALL - - When this code is per- formed, the equipment cannot be started up. * This setting is enabled only when the GP-1060 is installed. 3 1428 Data overwrite kit Forcible SRAM backup data all clearing ALL - - When this code is per- formed, the equipment cannot be started up. * This setting is enabled only when the GP-1060 is installed. 3 1429 User interface Margin width (Top/Bottom, Left/Right) ALL Front: 7/ Back: 7 SYS This setting is not reflected in Right, even if the value less than 2 is set for Back. 10 1430 User interface Margin width (Bookbinding margin) ALL 14 SYS 1 1431 Network ACC (AT_CASETTE_CHANGE) for Printer/Box printing ALL 1 SYS 0: ACC prohibited 1: Only in the same paper direction 2: In both same direc- tion and different directions 1 1432 Network Mode only for Private Print ALL 0 SYS 0: Normal mode 1: Mode for Private Print 1 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 214 1433 Network Disable e-Filing function ALL 0 SYS 0: Function OFF (no restriction on data saving or other operations) 1: Function ON (Data saving or other operations are restricted) 1 1435 Network Disable private and proof print save function ALL 0 SYS 0: Function OFF (no restriction on data saving or other operations) 1: Function ON (Data saving or other operations are restricted) 1 1436 Network Disable fax save function ALL 0 SYS 0: Function OFF (no restriction on data saving or other operations) 1: Function ON (Data saving or other operations are restricted 1 1437 Paper feeding Hole punch on tab paper ALL 0 SYS 0: No hole punch 1: Hole punch 1 1438 Paper feeding Automatic feed setting of tab paper and insertion sheet (Remote) ALL 1 SYS 0: Disabled 1: Enabled 1 1439 Paper feeding Automatic feed setting of tab paper and insertion sheet (Local) ALL 1 SYS 0: Disabled 1: Enabled 1 1440 Network IP Conflict Detect ALL 1 - OFF/ON 1: Valid 2: Invalid 12 1441 Network SNTP Enable ALL 2 - OFF/ON 1: Valid 2: Invalid 12 1442 Network SNTP Polling rate ALL 24 - Data obtaining interval (Unit: Hour) 12 1444 Network Primary SNTP Address ALL - - SNTP server IP Address (Primary)12 1445 Network Secondary SNTP Address ALL - - SNTP server I P Address (Secondary) 12 1446 Network Port number to SNTP ALL 123 - 12 1447 Network IPP administrator name ALL - - This should b e an account which can con- trol all IPP jobs. 12 1448 Network IPP administrator pass- word ALL - - This should be the password of an account which can control all IPP jobs. 12 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 05/11