Toshiba Estudio 230 Manual

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 105
2
437 Fuser Fuser roller temperature  during printing 
(Center thermistor /Thick  
paper 2) ALL 8
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7: 175°C
8: 180°C 9: 185°C 
10: 190°C 
11: 195°C
12: 200°C 
13: 205°C 
14: 210°C 1
438 Fuser Fuser roller temperature  during printing 
(Center thermistor/OHP  
film) ALL 8
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7: 175°C
8: 180°C 9: 185°C 
10: 190°C 
11: 195°C
12: 200°C 
13: 205°C 
14: 210°C 1
439 Fuser Pre-running time for first  printing
(Thick paper 2) ALL 10
 M 0: Invalid 1: 1 sec.
2: 2 sec. 3: 3 sec.
4: 4 sec. 5: 5 sec. 
6: 6 sec. 7: 7 sec. 
8: 8 sec. 9: 9 sec. 
10: 10 sec. 
11: 12 sec. 
12: 14 sec. 
13: 16 sec. 
14: 18 sec. 
15: 20 sec. 1
440 Fuser Pre-running time for first  printing 
(Plain paper) ALL 0
 M 0: Invalid 1: 1 sec.
2: 2 sec. 3: 3 sec.
4: 4 sec. 5: 5 sec. 
6: 6 sec. 7: 7 sec.
8: 8 sec. 9: 9 sec. 
10: 10 sec. 
11: 12 sec.
12: 14 sec. 
13: 16 sec. 
14: 18 sec.
15: 20 sec. 1
441 Fuser Pre-running time for first  printing 
(Thick paper 1) ALL 0
 M 0: Invalid 1: 1 sec.
2: 2 sec. 3: 3 sec.
4: 4 sec. 5: 5 sec. 
6: 6 sec. 7: 7 sec. 
8: 8 sec. 9: 9 sec. 
10: 10 sec.
11: 12 sec. 
12: 14 sec. 
13: 16 sec. 
14: 18 sec. 
15: 20 sec. 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/05 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 106
448 Fuser Fuser roller temperature in 
Energy Saving Mode 
(Side thermistor) ALL 0
 M 0: OFF 1: 40°C
2: 50°C 3: 60°C
4: 70°C 5: 80°C 
6: 90°C 7: 100°C
8: 110°C 9: 120°C 
10: 130°C 
11: 140°C
12: 150°C 
13: 160°C 1
450 Fuser Fuser roller temperature  during printing 
(Side thermistor/Plain  
paper) ALL 8
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7: 175°C 
8: 180°C 9: 185°C
10: 190°C 
11: 195°C 
12: 200°C
13: 205°C 
14: 210°C 1
451 Fuser Fuser roller temperature  during printing 
(Side thermistor/Thick 
paper 1) ALL 8
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C
4: 160°C 5: 165°C
6: 170°C 7: 175°C 
8: 180°C 9: 185°C 
10: 190°C
11: 195°C 
12: 200°C 
13: 205°C 
14: 210°C 1
452 Fuser Fuser roller temperature  during printing 
(Side thermistor/Thick 
paper 2) ALL 8
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C
4: 160°C 5: 165°C
6: 170°C 7: 175°C 
8: 180°C 9: 185°C 
10: 190°C
11: 195°C 
12: 200°C 
13: 205°C
14: 210°C 1
453 Fuser Fuser roller temperature  during printing 
(Side thermistor/OHP film) ALL 8
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C
4: 160°C 5: 165°C
6: 170°C 7: 175°C 
8: 180°C 9: 185°C 
10: 190°C
11: 195°C 
12: 200°C 
13: 205°C
14: 210°C 1
455 Image  process-
ing Toner supply amount cor- 
rection/Toner motor control
ALL 0
 M Corrects the supply 
amount of the fresh  
toner (driving period of  
the toner motor) into the  
developer unit. 
0: x1.0 1: x0.75 
2: x0.5 3: x0.3 
4: x2.0 5: x1.5 1
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 107
2
462 RADF Setting for switchback  operation to copy mixed- 
sized original on RADF ALL 0
 SYS Sets whether or not 
detecting the original 
length by transporting  
without scanning in 
reverse when finding  
A4-R/FOLIO paper. 
0: Invalid- Judges as A4-R without trans- 
porting in reverse  
with no scanning.
1: Valid- Judges  whether it is A4-R or  
FOLIO size by  
transporting in  
reverse with no  
scanning.
* The original is trans- ported in reverse 
with no scanning  
when detecting LT- 
LG size-paper in LT,  
regardless of this 
setting. 1
463-0 Paper  feeding Feeding retry 
number set- 
ting 
(upper  
drawer) Plain  
paper
ALL 5
 M Sets the number of 
times of the feeding  
retry from the upper  
drawer. 4
463-1 Others ALL 5 M 4
464-0 Paper  feeding Feeding retry  
number set- 
ting (lower 
drawer) Plain  
paper
ALL 5
 M Sets the number of 
times of the feeding  
retry from the lower 
drawer. 4
464-1 Others ALL 5 M 4
465-0 Paper  feeding Feeding retry 
number set- 
ting 
(PFP upper 
drawer) Plain  
paper
ALL 5
 M Sets the number of 
times of the feeding  
retry from the PFP  
upper drawer. 4
465-1 Others ALL 5 M 4
466-0 Paper  feeding Feeding retry  
number set- 
ting
(PFP lower  
drawer) Plain  
paper
ALL 5
 M Sets the number of 
times of the feeding  
retry from the PFP 
lower drawer. 4
466-1 Others ALL 5 M 4
467-0 Paper  feeding Feeding retry 
number set-
ting 
(bypass feed) Plain  
paper
ALL 5
 M Sets the number of 
times of the feeding 
retry from the bypass  
tray. 4
467-1 Others ALL 5 M 4
468-0 Paper  feeding Feeding retry 
number set- 
ting
(LCF) Plain  
paper
ALL 5
 M Sets the number of 
times of the feeding  
retry from the LCF. 4
468-1 Others ALL 5 M 4
471 Paper  feeding Paper size (Postcard) 
feeding/widthwise direction ALL 148/100
 M * Postcard is sup-
ported only for JPN  
model. 10
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 108
477 General Machine identification 
information ALL Refer to 
content M 
Lower drawer refer- 
ence: 0 
Upper drawer refer-
ence: 1 2
478 Laser Judged number of polygo- nal motor rotation error 
(Normal rotation) ALL 0
 M Displays the error 
[CA10] when the set  
number of rotation error 
has been detected. 
0: 2 times 1: 12 times 1
479 Laser Judged number of polygo- nal motor rotation error 
(At acceleration/decelera- 
tion) ALL 0
 M 0: Waiting time for 
polygonal motor  
rotation overshoot- 
ing 0.6 sec.
1: Waiting time for  polygonal motor 
rotation overshoot- 
ing 2.2 sec. 1
480 Paper  feeding Default setting of paper 
source PPC 0
 SYS 0: A4/LT 1: LCF
2: Upper drawer 
3: Lower drawer 
4: PFP upper drawer
5: PFP lower drawer 1
481 Paper  feeding Automatic change of paper 
source PPC 1
 SYS Sets whether or not 
changing the drawer  
automatically to the  
other drawer with the 
paper of the same size  
when paper in the  
selected drawer has run 
out. 
0: OFF 
1: ON (Changes to the drawer with the  
same paper direc- 
tion and size: ex. A4  
to A4)
2: ON (Changes to the 
drawer with the 
same paper size.  
Paper with the dif- 
ferent direction is  
acceptable as long  
as the size is the  
same: ex., A4 to A4- 
R, LT-R to LT. “1” is  
applied when the  
staple/hole-punch is 
specified.) 1
482 Paper  feeding Feeding retry setting ALL 0
M 0: ON
1: OFF 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 109
2
483 Laser Pre-running rotation of  polygonal motor ALL 0
 SYS Sets whether or not 
switching the polygonal  
motor from the standby  
rotation to the normal 
rotation when the origi- 
nal is set on the RADF  
or the platen cover is  
opened. 
0: Valid (when using RADF and the origi- 
nal is set manually)
1: Invalid 
2: Valid (when using 
RADF only) 1
484 Laser Polygonal motor rotational  status switching at the Auto  
Clear Mode ALL 0
 SYS Sets whether or not 
switching the polygonal 
motor from the normal  
rotation to the standby  
rotation at the Auto  
Clear Mode.
0: Valid 1: Invalid 1
485 Laser Rotational status of polygo- nal motor on standby ALL JPN: 1
Others: 0 SYS Sets the rotational sta-
tus of polygonal motor  
on standby. 
0: Rotated (The rota-tional speed is set at  
08-490.)
1: Stopped 1
486 Laser Timing of auto-clearing of  polygonal motor pre-run- 
ning rotation ALL 0
 SYS Switches the polygonal 
motor to the standby 
rotation when a certain  
period of time has  
passed from the pre- 
running. At this code,  
the period to switch the 
status to the standby  
rotation is set. 
0: 15 sec.1: 30 sec.
2: 45 sec. 
* This setting is effec-
tive when “0” or “2”  
is set at 08-483. 1
488 Laser Setting of polygonal motor  type ALL 0
 M Set the type of polygo-
nal motor. 
0: 2-clock type 
1: 3-clock type 
2: 4-clock type 
3: 4-clock type 1
489 Laser Polygonal motor rotation  number on standby ALL 5
 M 0: 38,090.55 rpm
1: 35,000 rpm 
2: 30,000 rpm 
3: 25,000 rpm 
4: 20,000 rpm 
5: 10,000 rpm 1
490 Laser Polygonal motor rotation in  the energy saving mode ALL 0
 M 0: Stopped
1: 10,000 rpm 1
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
04/09 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 110
491 Transfer Transfer charger bias cor-
rection (H) at duplexing ALL 149
 M Corrects the transfer 
charger bias output  
value of the leading  
edge area of paper at 
duplexing. 1
492 Transfer Transfer charger bias cor- rection (C) at duplexing ALL 139
 M Corrects the transfer 
charger bias output  
value of the center area  
of paper at duplexing. 1
493 Transfer Transfer charger bias cor- rection (L) at duplexing ALL 128
 M Corrects the transfer 
charger bias output 
value of the trailing 
edge area of paper at  
duplexing. 1
502 Image Error diffusion and dither  setting at photo mode PPC 1
 SYS Sets the image repro-
duction method at  
photo mode. 
0: Error diffusion 
1: Dither 1
503 User  interface Default setting of density  
adjustment PPC 0
 SYS 0: Automatic
1: Manual (Center) 1
508 Image Custom Mode setting PPC 0 SYS 0: Not used
1: Custom Mode 1 when Text/Photo is  
set as a base
2: Custom Mode 2  when Text is set as 
a base
3: Custom Mode 3  when Photo is set 
as a base 1
509 Image Error diffusion and dither  setting at a photo mode 
(Custom Mode) PPC 1
 SYS Switches the image 
processing method 
when Custom Mode 3  
is set. 
0: Error diffusion 
1: Dither 1
515 Fuser Temperature setting of  warming-up 
(Center thermistor) ALL 9
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C
4: 160°C 5: 165°C 
6: 170°C 7: 175°C 
8: 180°C 9: 185°C 
10: 190°C 
11: 195°C 
12: 200°C
13: 205°C 
14: 210°C 1
516 Fuser Temperature setting of  warming-up 
(Side thermistor) ALL 9
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7: 175°C 
8: 180°C 9: 185°C
10: 190°C 
11: 195°C 
12: 200°C
13: 205°C 
14: 210°C 1
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 111
2
518 Fuser Fuser roller temperature  during printing 
(Side thermistor/Thick  
paper 3) ALL 9
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7: 175°C
8: 180°C 9: 185°C 
10: 190°C 
11: 195°C
12: 200°C 
13: 205°C 
14: 210°C 1
520 Fuser Fuser roller temperature  during printing 
(Center thermistor/Enve- 
lope) ALL 9
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C 
4: 160°C 5: 165°C 
6: 170°C 7: 175°C
8: 180°C 9: 185°C 
10: 190°C 
11: 195°C
12: 200°C 
13: 205°C 
14: 210°C 1
521 Fuser Fuser roller temperature  during printing
(Side thermistor/Envelope) ALL 9
 M 0: 140°C 1: 145°C
2: 150°C 3: 155°C
4: 160°C 5: 165°C 
6: 170°C 7: 175°C 
8: 180°C 9: 185°C 
10: 190°C 
11: 195°C 
12: 200°C 
13: 205°C 
14: 210°C 1
523 Fuser Pre-running time for first  printing 
(Envelope) ALL 10
 M 0: Invalid 1: 1 sec.
2: 2 sec. 3: 3 sec.
4: 4 sec. 5: 5 sec. 
6: 6 sec. 7: 7 sec. 
8: 8 sec. 9: 9 sec. 
10: 10 sec. 
11: 12 sec. 
12: 14 sec.
13: 16 sec. 
14: 18 sec. 
15: 20 sec. 1
525-0 Fuser Temperature  drop switching  
time setting  
during printing 
(Center ther- 
mistor)The first  
drop
ALL 20
 M This code is valid only 
when “20” is set to 08- 
535. 
Setting value x 5 sec.:  
from 0 to 1,000 sec.  
later 4
525-1 The sec- ond dropALL 38
 M 4
525-2 The third  dropALL 75
 M 4
525-3 The fourth  dropALL 75
 M 4
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/05 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 112
526 Fuser Pre-running time for first 
printing (OHP film) ALL 0
 M 0: Invalid 1: 0 sec.
2: 2 sec. 3: 3 sec. 
4: 4 sec. 5: 5 sec. 
6: 6 sec. 7: 7 sec.
8: 8 sec. 9: 9 sec. 
10: 10 sec. 
11: 12 sec. 
12: 14 sec. 
13: 16 sec. 
14: 18 sec. 
15: 20 sec. 1
527-0 Fuser Temperature  drop switching 
time setting 
during printing 
(Side ther- 
mistor)The first  
drop
ALL 20
 M This code is valid only 
when “20” is set to 08- 
535.
Setting value x 5 sec.:  
from 0 to 1,000 sec.  
later 4
527-1 The sec- ond dropALL 30
 M 4
527-2 The third  dropALL 48
 M 4
527-3 The fourth  dropALL 75
 M 4
535 Fuser Temperature drop control  setting during printing
(Temperature/Time) ALL 2
 M 0: None 
1: Pattern 1
2: Pattern 2
3: Pattern 3 
4: Pattern 4 
5: Pattern 5
6: Pattern 6 
7: Pattern 7 
8: Pattern 8 
9: Pattern 9 
10: Pattern 10 
11: Pattern 11
12: Pattern 12 
13: Pattern 13 
14: Pattern 14
15: Pattern 15 
16: Pattern 16 
17: Pattern 17
18: Pattern 18 
19: Pattern 19 
20: Manual adjustment 1
536-0 Fuser Temperature  drop setting  
during printing 
(Center ther-
mistor)The first 
drop
ALL 1
 M This code is valid only 
when “20” is set to 08- 
535. 
Setting value x -5°C: 
from 0°C to -50°C 4
536-1 The sec- ond dropALL 2
 M 4
536-2 The third  dropALL 3
 M 4
536-3 The fourth  dropALL 3
 M 4
537-0 Fuser Temperature  drop setting  
during printing 
(Side ther- 
mistor)The first  
drop
ALL 1
 M 4
537-1 The sec- ond dropALL 2
 M 4
537-2 The third  dropALL 3
 M 4
537-3 The fourth  dropALL 5
 M 4
Setting mode (08) 
Code Classifi-
cation ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/05 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 113
2
550 Image Default setting of original  mode PPC 0
 SYS 0: Text/Photo
1: Photo 2: Text 
3: Custom Mode 1
601 User  interface Setting for the Energy Sav- 
ing Mode ALL 0
 SYS 0:  Auto Shut Off Mode
1:  Sleep Mode 1
602 User  interface Screen setting for Auto 
power Save Mode and  
Auto Shut OFF Mode ALL EUR: 0
UC: 1
JPN: 1
 SYS 0: OFF 1: ON 1
603 User  interface Setting for automatic  
duplexing mode PPC 0
 SYS 0: Invalid
1: Single-sided to duplex copying
2: Double-sided to 
duplex copying
3: User selection 1
604 User  interface Default setting for APS/ 
AMS PPC 0
 SYS 0: APS (Automatic 
Paper Selection)
1: AMS (Automatic  Magnification Selec-
tion)
2: Not selected 1
605 User  interface Centering printing of pri-
mary/secondary direction  
at AMS PPC 1
 SYS 0: Invalid 1: Valid 1
607 User  interface Default setting of RADF  
mode PPC 0
 SYS 0: Continuous feeding 
(by pressing the 
[START] button)
1: Single feeding
(by setting original  
on the tray) 1
610 User  interface Key touch sound of control  
panel ALL 1
 SYS 0: OFF
1: ON 1
611 User  interface Book type original priority PPC 0
SYS 0: Left page to right 
page
1: Right page to left  page 1
612 General Summer time mode ALL 0 SYS 0: Not summer time
1: Summer time 1
613 User  interface Paper size selection for  
[OTHER] button PPC EUR:
FOLIO
UC: 
COMP
JPN:  A5-R SYS Press the button on the 
LCD to select the size. 9
614 Network Local I/F time-out period PRT 6 SYS Sets the period of time 
when the job is judged 
as completed in local I/ 
F printing (USB or par- 
allel). 
1: 1.0 sec. 
2: 1.5 sec. 
-50: 25.5 sec. 
(in increments of 0.5  
sec.) 1
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
06/01 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 114
615 General Size information of main 
memory and page memory ALL - SYS Displays the sizes of 
the main memory and  
page memory. Enables  
to check if each mem-
ory is properly recog- 
nized. 2
617 User  interface Print setting without  
department code ALL 0
 SYS 0: Printed
1: Not printed 1
618 User  interface Default setting when mixed  
size originals are set on  
RADF PPC 0
 SYS 0: Scanned as all in 
same size
1: Scanned as each 
original size 1
619 Paper  feeding Time lag before Auto Job  
Start of bypass feeding ALL 4
 SYS Sets the time taken to 
add paper feeding  
when paper in the  
bypass tray has run out 
during the bypass feed  
copying. 
0: Paper is not drawn in unless the  
[START] button is  
pressed.
1-10: Setting value x 
0.5 sec. 1
620 User  interface Department management  
setting (Copier) PPC 1
 SYS 0: Invalid
1: Valid 1
621 User  interface Department management  
setting (FAX) FAX 1
 SYS 0: Invalid
1: Valid 1
622 User  interface Department management  
setting (Printer) PRT 1
 SYS 0: Invalid
1: Valid 1
623 User  interface Department management  
setting (Scanner) SCN 1
 SYS 0: Invalid
1: Valid 1
624 User  interface Department management  
setting (List print) PRT 1
 SYS 0: Invalid
1: Valid 1
625 User  interface Blank copying prevention  
mode during RADF jam- 
ming PPC 0
 SYS 0: OFF
1: ON (Start printing when the scanning  
of each page is fin-
ished) 1
627 User  interface Rotation printing at the  
non-sorting ALL 0
 SYS 0: Not rotating
1: Rotating 1
628 User  interface Direction priority of original  
image PPC 0
 SYS 0: Automatic
1: Portrait 1
629 User  interface Department management  
setting ALL 0
 SYS 0: Invalid
1: Valid 1
633 Data overwrite 
kit Releasing F200 service  
call
ALL 0
 SYS 0:  Not used
1:  Board installed  
  (GP-1050) 
2:  Service call 1
634 User  interface Inner receiving tray priority  
at Non-sort Mode ALL 0
 SYS 0: Normal
1: Inner receiving tray 1
636 User  interface Width setting for image  
shift copying (linkage of  
front side and back side) PPC 0
 SYS 0: ON
1: OFF 1
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/05