Toshiba Estudio 230 Manual
Have a look at the manual Toshiba Estudio 230 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 185 2 535 Fuser Temperature drop control setting during printing (Temperature/Time) ALL 2 M 0: None 1: Pattern 1 2: Pattern 2 3: Pattern 3 4: Pattern 4 5: Pattern 5 6: Pattern 6 7: Pattern 7 8: Pattern 8 9: Pattern 9 10: Pattern 10 11: Pattern 11 12: Pattern 12 13: Pattern 13 14: Pattern 14 15: Pattern 15 16: Pattern 16 17: Pattern 17 18: Pattern 18 19: Pattern 19 20: Manual adjustment 1 536-0 Fuser Temperature drop setting during printing (Center ther- mistor)The first drop ALL 1 M This code is valid only when “20” is set to 08- 535. Setting value x -5°C: from 0°C to -50°C 4 536-1 The sec- ond dropALL 2 M 4 536-2 The third dropALL 3 M 4 536-3 The fourth dropALL 3 M 4 537-0 Fuser Temperature drop setting during printing (Side ther- mistor)The first drop ALL 1 M 4 537-1 The sec- ond dropALL 2 M 4 537-2 The third dropALL 3 M 4 537-3 The fourth dropALL 5 M 4 550 Image Default setting of original mode PPC 0 SYS 0: Text/Photo 1: Photo 2: Text 3: Custom Mode 1 601 User interface Setting for the Energy Sav- ing Mode ALL 0 SYS 0: Auto Shut Off Mode 1: Sleep Mode 1 602 User interface Screen setting for Auto power Save Mode and Auto Shut OFF Mode ALL EUR: 0 UC: 1 JPN: 1 SYS 0: OFF 1: ON 1 603 User interface Setting for automatic duplexing mode PPC 0 SYS 0: Invalid 1: Single-sided to duplex copying 2: Double-sided to duplex copying 3: User selection 1 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 06/01
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 186 604 User interface Default setting for APS/ AMS PPC 0 SYS 0: APS (Automatic Paper Selection) 1: AMS (Automatic Magnification Selec- tion) 2: Not selected 1 605 User interface Centering printing of pri- mary/secondary direction at AMS PPC 1 SYS 0: Invalid 1: Valid 1 607 User interface Default setting of RADF mode PPC 0 SYS 0: Continuous feeding (by pressing the [START] button) 1: Single feeding (by setting original on the tray) 1 610 User interface Key touch sound of control panel ALL 1 SYS 0: OFF 1: ON 1 611 User interface Book type original priority PPC 0 SYS 0: Left page to right page 1: Right page to left page 1 612 General Summer time mode ALL 0 SYS 0: Not summer time 1: Summer time 1 613 User interface Paper size selection for [OTHER] button PPC EUR: FOLIO UC: COMP JPN: A5-R SYS Press the button on the LCD to select the size. 9 614 Network Local I/F time-out period PRT 6 SYS Sets the period of time when the job is judged as completed in local I/ F printing (USB or par- allel). 1: 1.0 sec. 2: 1.5 sec. -50: 25.5 sec. (in increments of 0.5 sec.) 1 615 General Size information of main memory and page memory ALL - SYS Displays the sizes of the main memory and page memory. Enables to check if each mem- ory is properly recog- nized. 2 617 User interface Print setting without department code ALL 1 SYS 0: Printed 1: Not printed (pooled in the invalid queue) 2: Deleted forcibly 1 618 User interface Default setting when mixed size originals are set on RADF PPC 0 SYS 0: Scanned as all in same size 1: Scanned as each original size 1 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 187 2 619 Paper feeding Time lag before Auto Job Start of bypass feeding ALL 4 SYS Sets the time taken to add paper feeding when paper in the bypass tray has run out during the bypass feed copying. 0: Paper is not drawn in unless the [START] button is pressed. 1-10: Setting value x 0.5 sec. 1 620 User interface Department management setting (Copier) PPC 1 SYS 0: Invalid 1: Valid 1 621 User interface Department management setting (FAX) FAX 1 SYS 0: Invalid 1: Valid 1 622 User interface Department management setting (Printer) PRT 1 SYS 0: Invalid 1: Valid 1 623 User interface Department management setting (Scanner) SCN 1 SYS 0: Invalid 1: Valid 1 624 User interface Department management setting (List print) PRT 1 SYS 0: Invalid 1: Valid 1 625 User interface Blank copying prevention mode during RADF jam- ming PPC 0 SYS 0: OFF 1: ON (Start printing when the scanning of each page is fin- ished) 1 627 User interface Rotation printing at the non-sorting ALL 0 SYS 0: Not rotating 1: Rotating 1 628 User interface Direction priority of original image PPC 0 SYS 0: Automatic 1: Portrait 1 629 User interface Department management setting ALL 0 SYS 0: Invalid 1: Valid 1 633 Data overwrite kit Releasing F200 service call ALL 0 SYS 0: Not used 1: Board installed (GP-1060) 2: Service call 1 634 User interface Inner receiving tray priority at Non-sort Mode ALL 0 SYS 0: Normal 1: Inner receiving tray 1 636 User interface Width setting for image shift copying (linkage of front side and back side) PPC 0 SYS 0: ON 1: OFF 1 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 188 638 General Time differences ALL EUR: 24 UC: 40JPN: 6 SYS 0: +12.0h 1: +11.5h 2: +11.0h 3: +10.5h 4: +10.0h 5: +9.5h 6: +9.0h 7: +8.5h 8: +8.0h 9: +7.5h 10: +7.0h 11: +6.5h 12: +6.0h 13: +5.5h 14: +5.0h 15: +4.5h 16: +4.0h 17: +3.5h 18: +3.0h 19: +2.5h 20: +2.0h 21: +1.5h 22: +1.0h 23: +0.5h 24: 0.0h 25: -0.5h 26: -1.0h 27: -1.5h 28: -2.0h 29: -2.5h 30: -3.0h 31: -3.5h 32: -4.0h 33: -4.5h 34: -5.0h 35: -5.5h 36: -6.0h 37: -6.5h 38: -7.0h 39: -7.5h 40: -8.0h 41: -8.5h 42: -9.0h 43: -9.5h 44: -10.0h 45: -10.5h 46: -11.0h 47: -11.5h 1 640 User interface Date display format ALL EUR: 1 UC: 2 JPN: 0 SYS 0: YYYY.MM.DD. 1: DD.MM.YYYY 2: MM.DD.YYYY 1 641 User interface Automatic Sorting Mode setting (RADF) PPC 2 SYS 0: Invalid 1: STAPLE 2: SORT 3: GROUP 4: ROTATE SORT 1 642 User interface Default setting of Sorter Mode PPC 0 SYS 0: NON-SORT 1: STAPLE 2: SORT 3: GROUP 4: ROTATE SORT 1 645 User interface Correction of reproduction ratio in editing copy PPC 10 SYS Sets the reproduction ratio for the “X in 1” printing (including mag- azine sort) to the “Reproduction ratio x Correction ratio”. 0: 90% 1: 91% 2: 92% 3: 93% 4: 94% 5: 95% 6: 96% 7: 97% 8: 98% 9: 99% 10: 100% 1 646 User interface Image position in editing PPC 0 SYS Sets the page pasted position for “X in 1” to the upper left corner/ center. 0: Cornering 1: Centering 1 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 189 2 648 User interface Returning finisher tray when printing is finished ALL 0 SYS Sets whether or not returning the finisher tray to the bin 1 when printing is finished. 0: Not returned 1: Returned 1 649 User interface Magazine sort setting PPC 0 SYS 0: Left page to right page 1: Right page to left page 1 650 User interface 2 in 1/4 in 1 page allocating order setting PPC 0 SYS 0: Horizontal 1: Vertical 1 651 User interface Printing format setting for Time stamp and Page Number PPC 2 SYS Hyphen (with page number) /Dropout (with date, time and page number) 0: OFF/OFF 1: ON/OFF 2: OFF/ON 3: ON/ON Note: Note: Hyphen printing format ON: -1- OFF: 1 1 652 User interface Cascade operation setting PPC 0 SYS 0: OFF 1: ON 1 653 User interface Cascade operation setting PRT 0 SYS 0: OFF 1: ON 1 657 User interface Direction priority for date and time stamp printing PPC 0 SYS 0: Short edge 1: Long edge 1 658 User interface Auto Job Start setting for bypass feed printing PRT 0 SYS Sets whether or not feeding a paper auto- matically into the equip- ment when it is placed on the bypass tray. 0: OFF (Press the [START] button to start feeding.) 1: ON (Automatic feeding) 1 659 User interface Auto Job start setting for bypass feed printing PPC 1 SYS Sets whether or not feeding a paper auto- matically into the equip- ment when it is placed on the bypass tray. 0: OFF (Press the [START] button to start feeding.) 1: ON (Automatic feeding) 1 660 Network Auto-forwarding setting of received FAX ALL 0 SYS 0: Invalid 1: Valid 1 661 Network Auto-forwarding setting of received E-mail ALL 0 SYS 0: Invalid 1: Valid 1 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 190 662 General Clearing of SMS partition ALL - SYS Clears SM S partition. (Performs when the service call [F106] has occurred.) 3 666 General /SHR partition clearing ALL - SYS Initializes the Elec- tronic Filing. 3 667 General /SHA partition clearing ALL - SYS Initializes the shared folder. 3 670 General HDD diagnostic menu dis- play ALL - SYS Display the HDD infor- mation 2 671 User interface Size indicator ALL 0 SYS 0: Invalid 1: Valid 1 672 General Initialization of department management information - - SYS Initializing of the depart- ment management information * Key in the code and press the [INITIAL- IZE] button to per- form the initialization. If the area storing the department man- agement informa- tion is destroyed for some reason, “Enter Department Code” is displayed on the control panel even if the department management func- tion is not set on. In this case, initialize the area with this code. This area is normally initialized at the factory. 3 673 General Trial period setting PRT/ SCN254 SYS Sets the trial period from 1 to 60 days. This setting is effective only when the default value is “254”. Once the default value is set, this value is only used for a reference. 1 678 General Setting of banner advertis- ing display ALL 0 SYS Sets whether or not dis- playing the banner advertising. The setting contents of 08-679 and 08-680 are displayed at the time display section on the right top of the screen. When both are set, each content is dis- played alternately. 0: Not displayed 1: Displayed 1 679 General Banner advertising display 1 ALL - SYS Maximum 27 letters (one-byte character) 11 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 05/11
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 191 2 680 General Banner advertising display 2 ALL - SYS Maximum 27 letters (one-byte character) 11 681 General Display of [BANNER MES- SAGE] button ALL 0 SYS 0: Not displayed 1: Displayed * This button enables the entry of “Banner advertising display 1 (08-679)” and “Ban- ner advertising dis- play 2 (08-680)” on the control panel. 1 682 User interface Offsetting between jobs ALL 1 SYS 0: Invalid 1: Valid 1 683 General Duplex printing setting when coin controller is used ALL 1 SYS When the duplex print- ing is short paid with a coin controller, reverse side of the original is not printed and is con- sidered as a defect (printing job may be cleared). To solve this problem, the selection of printing method is enabled with this set- ting. 0: Invalid (Both sides printed) 1: Valid (Only one side printed) 1 684 General Rebuilding all databases ALL - SYS Rebuilds a ll databases. 3 685 General Rebuilding all databases related to address book ALL - SYS Rebuilds all databases related to the Address Book. 3 686 General Rebuilding all databases related to log ALL - SYS Rebuilds all databases related to the log. 3 689 FAX Adaptation of paper source priority selection FAX 0 SYS 0: Not subjected for APS judgment 1: Subjected for APS judgment 1 690 General HDD formatting ALL - SYS 2: Normal formatting 7 691 General HDD type display ALL - SYS 0: Not formatted 1: Not used 2: Normal format 7 692 Mainte- nance Performing panel calibra- tion ALL - SYS Performs the calibration of the pressing position on the touch panel (LCD screen). The cali- bration is performed by pressing 2 reference positions after this code is started up. 1 693 General Initialization of NIC infor- mation ALL - SYS Returns the value to the factory shipping default value. 3 694 General Performing HDD testing ALL - SYS Checks the b ad sector. 3 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 05/11
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 192 695 General Notifying condition of trial period end PRT/ SCN 3 SYS Sets when the end of trial period is notified. 0: On the day it ends 1 to 59: n days before 1 696 Scram- bler board Installation of scrambler board (Option) ALL 0 - 0: Not installed 1: Installed 2 697 Paper feeding Paper type priority PPC 1 SYS Sets the paper type pri- ority during copying. 1: Plain paper 2: Thick paper 1 1 698 Scram- bler board Entering the key code for scrambler board ALL - - Start up this code and have the user enter the key code. Once the key code has been set, this code can- not be set again on security grounds. 5 699 Scram- bler board Erasing all data in HDD ALL - - This setting is effectiv e only when the scram- bler board is installed. 3 701 FAX Destination setting for FAX FAX EUR: 5 UC: 4 JPN: 0 Other: 1 SYS 0: Japan 1: Asia 2: Australia 3: Hong Kong 4: U.S.A./Canada 5: Germany 6: U.K. 7: Italy 8: Belgium 9: Netherlands 10: Finland 11: Spain 12: Austria 13: Switzerland 14: Sweden 15: Denmark 16: Norway 17: Portugal 18: France 19: Greece 20: Poland 21: Hungary 22: Czech 23: Turkey 24: South Africa 25: Taiwan 1 702 Mainte- nance Remote-controlled service function ALL 2 SYS 0: Valid (Remote-con- trolled server) 1: Valid (L2) 2: Invalid 1 703 Mainte- nance Remote-controlled service HTTP server URL setting ALL - SYS Maximum 256 Bytes 11 Setting mode (08) Code Classifi- cation ItemsFunc- tion Default RAM Contents Proce- dure 05/11
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE 2 - 193 2 704-0 User interface Interruption of stapling oper- ation (no sta- ple) Copying ALL 1 SYS 0: Continues printing by switching sort setting 1: Interrupts printing 4 704-1 Printing / BOX print- ingALL 1 SYS 0: Continues printing by switching sort setting 1: Interrupts printing 4 707 Mainte- nance Remote-controlled service HTTP initially-registered server URL setting ALL https:// device. mfp- support. com:443/ device/ firstregist. ashx SYS Maximum 256 Bytes 11 710 Mainte- nance (Remote) Short time interval setting of recovery from Emer- gency Mode ALL 24 SYS Sets the time interval to recover from the Emer- gency Mode to the Nor- mal Mode. (Unit: Hour) 1 711 Mainte- nance (Remote) Short time interval setting of Emergency Mode ALL 60 SYS Unit: Minute 1 715 Mainte- nance Remote-controlled service periodical polling timing (Hour/Hour/Minute/Minute) ALL 1230 SYS 0 (0:00) to 2359 (23:59) 1 716 Mainte- nance Remote-controlled service Writing data of self-diag- nostic code ALL 0 SYS 0: Prohibited 1: Accepted 1 717 Mainte- nance Remote-controlled service response waiting time (Timeout) ALL 3 SYS Unit: Minute 1 718 Mainte- nance Remote-controlled service initial registration ALL 0 SYS 0: OFF 1: Start 2: Only certification is scanned 1 719 Mainte- nance Remote-controlled service tentative password ALL - SYS Maximum 10 letters 11 720 Mainte- nance Status of remote-con- trolled service initial regis- tration (Display only) ALL 0 SYS 0: Not registered 1: Registered 2 721 Mainte- nance Service center call function ALL 2 SYS 0: OFF 1: Notifies all service calls 2: Notifies all but paper jams 1 723 Mainte- nance Service center call HTTP server URL setting ALL - SYS Maximum 256 letters 11 726 Mainte- nance HTTP proxy setting ALL 1 SYS 0: Valid 1: Invalid 1 727 Mainte- nance HTTP proxy IP address setting ALL - SYS 000.000.000.000- 255.255.255.255 (Default value 000.000.000.000) 11 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 05/11
e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC 2 - 194 728 Mainte- nance HTTP proxy port number setting ALL 0 SYS 1 729 Mainte- nance HTTP proxy ID setting ALL - SYS Maximum 30 letters 11 730 Mainte- nance HTTP proxy password set- ting ALL - SYS Maximum 30 letters 11 731 Mainte- nance HTTP proxy panel display ALL 1 SYS 0: Valid 1: Invalid 1 732 Mainte- nance (Remote) Automatic ordering func- tion of supplies ALL 3 SYS 0: Ordered by FAX 1: Ordered by E-mail 2: Ordered by HTTP 3: OFF 1 733 Mainte- nance (Remote) Automatic ordering func- tion of supplies FAX number ALL - SYS Maximum 32 digits Enter hyphen with the [Monitor/Pause] button 11 734 Mainte- nance (Remote) Automatic ordering func- tion of supplies E-mail address ALL - SYS Maximum 192 letters List: 256 digits 11 738 Mainte- nance (Remote) Automatic ordering func- tion of supplies Users name ALL - SYS Maximum 50 letters 11 739 Mainte- nance (Remote) Automatic ordering func- tion of supplies Users telephone number ALL - SYS Maximum 32 digits Enter hyphen with the [Monitor/Pause] button 11 740 Mainte- nance (Remote) Automatic ordering func- tion of supplies Users E-mail address ALL - SYS Maximum 192 letters List: 256 digits 11 741 Mainte- nance (Remote) Automatic ordering func- tion of supplies Users address ALL - SYS Maximum 100 letters 11 742 Mainte- nance (Remote) Automatic ordering func- tion of supplies Service number ALL 0 SYS Maximum 5 digits 11 743 Mainte- nance (Remote) Automatic ordering func- tion of supplies Service technicians name ALL - SYS Maximum 50 letters 11 744 Mainte- nance (Remote) Automatic ordering func- tion of supplies Service technicians tele- phone number ALL - SYS Maximum 32 digits Enter hyphen with the [Monitor/Pause] button 11 745 Mainte- nance (Remote) Automatic ordering func- tion of supplies Service technicians E-mail address ALL - SYS Maximum 192 letters List: 256 digits 11 746 Mainte- nance (Remote) Automatic ordering func- tion of supplies Suppliers name ALL - SYS Maximum 50 letters 11 747 Mainte- nance (Remote) Automatic ordering func- tion of supplies Suppliers address ALL - SYS Maximum 100 letters 11 748 Mainte- nance (Remote) Automatic ordering func- tion of supplies Notes ALL - SYS Maximum 128 letters 11 Setting mode (08) Code Classifi- cation Items Func- tion Default RAM Contents Proce- dure 05/11