Toshiba Estudio 230 Manual

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 75
2
593 Image Gamma data  slope adjust- 
mentText/Photo PPC 0
SYS One’s place:
0: Equivalent to the set 
value 5 
1 to 9: Select the slope of 
Gamma curve (The  
larger the value is, the  
larger the slope 
becomes.) 
Ten’s place: 
0: Equivalent to the set  
value 5 
1 to 9: Select the slope of  
low density (The smaller  
the value is, the darker  
the background  
becomes.)
00: Use default value 1
594 Image Photo PPC 0 SYS 1
595 Image Text PPC 0 SYS 1
596-0 Image Gamma bal- ance adjust- 
ment
(PS/Photo)Low 
density PRT 128
 SYS When the value 
increases, the density in 
the target area becomes 
higher. 4
596-1 Image Medium  densityPRT 128
 SYS 4
596-2 Image High  densityPRT 128
 SYS 4
597-0 Image Gamma bal- ance adjust- 
ment 
(PS/Text)Low 
density PRT 128
 SYS When the value 
increases, the density in  
the target area becomes  
higher. 4
597-1 Image Medium  densityPRT 128
 SYS 4
597-2 Image High  densityPRT 128
 SYS 4
598-0 Image Gamma bal- ance adjust- 
ment 
(PCL/Photo)Low 
density PRT 128
 SYS When the value 
increases, the density in  
the target area becomes  
higher. 4
598-1 Image Medium  densityPRT 128
 SYS 4
598-2 Image High  densityPRT 128
 SYS 4
599-0 Image Adjustment of  gamma bal- 
ance 
(PCL/Detail)Low 
density PRT 128
 SYS When the value 
increases, the density in  
the target area becomes  
higher. 4
599-1 Image Medium  densityPRT 128
 SYS 4
599-2 Image High  densityPRT 128
 SYS 4
Adjustment mode (05) 
Code Classi-
fication Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 76
620 Image Sharpness 
adjustmentText/Photo PPC EUR: 1
UC: 1
JPN: 0
 SYS When the value 
increases, the image  
becomes sharper. When  
the value decreases, the 
image becomes softer.  
The smaller the value is,  
the less the moire 
becomes. 
One’s place: Fixed value  
(05-620 is “1”, 05-621 is  
“2”, 05-622 is “5”)  
Ten’s place: Adjustable  
from 0 to 9 regarding the  
default value as the stan- 
dard (The larger the  
value is, the sharper the 
image becomes.) 
* When entering “0” on the tens place, this  
value is not displayed  
on the entry screen. 1
621 Photo PPC 2 SYS 1
622 Text PPC EUR: 45 UC: 45
JPN: 45  SYS 1
648 Image Adjustment of  smudged/faint  
textText/Photo PPC 2
SYS Adjusts the level of the 
smudged/faint text.
With increasing the 
value, the faint text is  
suppressed, and with  
decreasing it, the  
smudged text is sup- 
pressed. 1
654 Image Adjustment of  smudged/faint  
textPS PRT 5
M Adjustment of the 
smudged/faint text.
With decreasing the  
value, the faint text is  
suppressed, and with 
increasing it, the  
smudged text is sup- 
pressed. 1
655 PCL PRT 5 M 1
667-0 Image Density adjustment of cop- ied image PPC 0
  M Adjusts the density level 
of copied image. 
When the value  
decreases, the text  
becomes lighter. 4
667-1 PPC 4
  M 4
667-2 PPC 5
  M 4
667-3 PPC 6
  M 4
667-4 PPC 10
  M 4
Adjustment mode (05) 
Code Classi-
fication ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 77
2
672-0 Image Adjustment of  printer image  
densityNormal PRT 0
M Adjustment of the image 
density.
With decreasing the  
value, the text becomes 
lighter. 4
672-1 PRT 4
 M 4
672-2 PRT 5
 M 4
672-3 PRT 6
 M 4
672-4 PRT 10
 M 4
676-0 Toner sav- ingPRT 0
 M 4
676-1 PRT 2
 M 4
676-2 PRT 3
 M 4
676-3 PRT 4
 M 4
676-4 PRT 5
 M 4
693 Image Range correc- tion on origi- 
nal set on the  
RADFText/Photo PPC EUR:12
UC:12
JPN:22
 SYS Sets whether the values 
of the background peak 
and text peak are fixed  
or not. One’s place is an  
adjustment for “auto- 
matic density” and ten’s  
place is for “manual den- 
sity”. Once they are  
fixed, the range correc- 
tion is performed with 
standard values. 
The values of the back- 
ground peak and text  
peak affect the reproduc- 
tion of the background  
density and text density  
respectively. 
1: fixed/fixed 
2: varied/fixed
3: fixed/varied 
4: varied/varied 
* Background peak/
Text peak 1
694 Photo PPC 12  SYS 1
695 Text PPC 22  SYS 1
700 Image Adjustment of  binarized  
threshold
(Text)Center  
value
FAX 120
 SYS When the value 
increases, the image at  
the center step becomes 
lighter. 1
701 Light step  valueFAX 20
 SYS When the value 
increases, the image of 
“light” side becomes 
lighter. 1
702 Dark step  valueFAX 20
 SYS When the value 
increases, the image of  
“dark” side becomes  
darker. 1
Adjustment mode (05) 
Code Classi-
fication ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 78
710 Image Density 
adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Center valuePhoto FAX 128
SYS When the value 
increases, the image at 
the center step becomes  
darker. 1
714 Text/Photo FAX 128 SYS 1
715 Image Density  adjustment
Fine adjust- 
ment of “man- 
ual density”/
Light step  
valuePhoto FAX 20
SYS When the value 
increases, the image of  
the “light” steps becomes  
lighter. 1
719 Text/Photo FAX 20 SYS 1
720 Image Density  adjustment 
Fine adjust- 
ment of “man- 
ual density”/ 
Dark step  
valuePhoto FAX 20
SYS When the value 
increases, the image of  
the “dark” steps  
becomes darker. 1
724 Text/Photo FAX 20 SYS 1
725 Image Density  adjustment 
Fine adjust- 
ment of “auto- 
matic density”Photo FAX 128
SYS When the value 
increases, the image  
becomes darker. 1
729 Text/Photo FAX 128 SYS 1
820 Image Range correc- tion/Text peak 
adjustmentText/Photo SCN 224
SYS When the value 
decreases, the text 
becomes darker. 1
821 Text SCN 224 SYS 1
822 Photo SCN 239 SYS 1
825 Image Range correc- tion on origi-
nal manually  
set on the  
original glassText/Photo SCN 12
 SYS Sets whether the values 
of the background peak  
and text peak are fixed  
or not. One’s place is an  
adjustment for “auto-
matic density” and ten’s  
place is for “manual den- 
sity”. Once they are  
fixed, the range correc- 
tion is performed with  
standard values. The  
values of the background  
peak and text peak affect  
the reproduction of the 
background density and  
text density respectively. 
1: fixed/fixed 
2: varied/fixed 
3: fixed/varied 
4: varied/varied 
* Background peak/Text peak 1
826 Text SCN 12  SYS 1
827 Photo SCN 12  SYS 1
Adjustment mode (05) 
Code Classi-
fication Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 79
2
830 Image Range correc- tion on origi- 
nal set on the  
RADFText/Photo SCN 12
 SYS Sets whether the value 
of the background peak  
and text peak are fixed  
or not. One’s place is an 
adjustment for “auto- 
matic density” and ten’s  
place is for “manual den-
sity”. Once they are  
fixed, the range correc- 
tion is performed with 
standard values. 
The values of the back- 
ground peak and text  
peak affect the reproduc- 
tion of the background  
density and text density 
respectively. 
1: fixed/fixed 
2: varied/fixed
3: fixed/varied 
4: varied/varied 
* Background peak/Text peak 1
831 Text SCN 12  SYS 1
832 Photo SCN 12  SYS 1
835 Image Range correc- tion/Back- 
ground peak  
adjustmentText/Photo SCN 48
SYS When the value 
increases, the back- 
ground becomes more  
brightened. 1
836 Text SCN 48 SYS 1
837 Photo SCN 40 SYS 1
845 Image Density  adjustment 
Fine adjust- 
ment of “man- 
ual density”/ 
Center valueText/Photo SCN 128
SYS When the value 
increases, the image at  
the center step becomes  
darker. 1
846 Text SCN 128 SYS 1
847 Photo SCN 128 SYS 1
850 Image Density  adjustment 
Fine adjust- 
ment of “man- 
ual density”/ 
Light step  
valueText/Photo SCN 20
SYS When the value 
increases, the image of  
the “light” steps becomes  
lighter. 1
851 Text SCN 20 SYS 1
852 Photo SCN 20 SYS 1
855 Image Density  adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Dark step  
valueText/Photo SCN 20
SYS When the value 
increases, the image of  
the “dark” steps  
becomes darker. 1
856 Text SCN 20 SYS 1
857 Photo SCN 20 SYS 1
860 Image Density  adjustment 
Fine adjust- 
ment of “auto- 
matic density”Text/Photo SCN 128
SYS When the value 
increases, the image  
becomes darker. 1
861 Text SCN 128 SYS 1
862 Photo SCN 128 SYS 1
Adjustment mode (05) 
Code Classi-
fication Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 80
865-0 Image Sharpness 
adjustment 
(Text/Photo)Reproduc- 
tion ratio  
40% or  
smallerSCN 1
 SYS When the value 
increases, the image  
becomes sharper. When  
the value decreases, the 
image becomes softer.  
The smaller the value is,  
the less the moire 
becomes. 
Ones place: Fixed value  
(05-865 is “1”, 05-866 is  
“2”, 05-867 is “5”) 
Tens place: Sharpness  
intensity (0: Use default  
value, 1-9: Filter inten- 
sity) 4
865-1 Reproduc- tion ratio  
41-80%SCN 1
 SYS 4
865-2 Reproduc- tion ratio  
81% or  
largerSCN 1
 SYS 4
866-0 Image Sharpness  adjustment 
(Text)Reproduc-
tion ratio 
40% or  
smallerSCN 2
 SYS 4
866-1 Reproduc- tion ratio  
41-80%SCN 2
 SYS 4
866-2 Reproduc- tion ratio 
81% or 
largerSCN 2
 SYS 4
867-0 Image Sharpness  adjustment 
(Photo)Reproduc- 
tion ratio  
40% or  
smallerSCN 5
 SYS 4
867-1 Reproduc- tion ratio  
41-80%SCN 5
 SYS 4
867-2 Reproduc- tion ratio  
81% or  
largerSCN 5
 SYS 4
913 Image Range correc- tion on origi- 
nal manually  
set on the  
original glassCustom 
Mode 1
PPC EUR:12
UC:12
JPN:22
 SYS Set whether the values 
of the background peak  
and text peak are fixed  
or not. Ones place is an  
adjustment for “auto- 
matic density” and tens  
place is for “manual den- 
sity”. Once they are 
fixed, the range correc- 
tion is performed with  
standard values. The 
values of the background  
peak and text peak affect  
the reproduction of the  
background density and  
text density respectively. 
1: fixed/fixed
2: varied/fixed 
3: fixed/varied 
4: varied/varied
* Background peak/Text peak 1
914 Custom  Mode 2PPC 22
 SYS 1
915 Custom  Mode 3PPC 12
 SYS 1
Adjustment mode (05) 
Code Classi-
fication ItemsFunc-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 81
2
916 Image Range correc- tion on origi- 
nal set on the  
RADFCustom 
Mode 1
PPC EUR:12
UC:12
JPN:22
 SYS Set whether the values 
of the background peak  
and text peak are fixed  
or not. Ones place is an  
adjustment for “auto- 
matic density” and tens  
place is for “manual den-
sity”. Once they are  
fixed, the range correc- 
tion is performed with 
standard values. The  
values of the background  
peak and text peak affect 
the reproduction of the  
background density and  
text density respectively.
1: fixed/fixed 
2: varied/fixed 
3: fixed/varied
4: varied/varied 
* Background peak/Text peak 1
917 Custom  Mode 2PPC 22
 SYS 1
918 Custom  Mode 3PPC 12
 SYS 1
919 Image Range correc- tion
Background  
peak adjust- 
mentCustom  
Mode 1
PPC 40
 SYS When the value 
increases, the back- 
ground becomes more  
brightened. 1
920 Custom  Mode 2PPC 64
 SYS 1
921 Custom  Mode 3PPC 16
 SYS 1
922 Image Sharpness  adjustmentCustom  
Mode 1PPC 1
 SYS When the value 
increases, the image 
becomes sharper. When  
the value decreases, the  
image becomes softer. 
The smaller the value is,  
the less the moire  
becomes.
Ones place: Fixed value  
(05-922 is “1”, 05-923 is  
“5”, 05-924 is “2”) 
Ten’s place: Adjustable  
from 0 to 9 regarding the  
default value as the stan-
dard (The larger the  
value is, the sharper the  
image becomes.)
* When entering “0” on the tens place, this 
value is not displayed 
on the entry screen. 1
923 Custom  Mode 2PPC EUR:45
UC:45
JPN:45  SYS 1
924 Custom  Mode 3PPC 2
 SYS 1
928 Image Adjustment of  smudged/faint 
textCustom  
Mode 1
PPC 2
 SYS Adjustment of the 
smudged/faint text. 
With increasing the  
value, the faint text is  
suppressed, and with  
decreasing it, the  
smudged text is sup- 
pressed. 1
Adjustment mode (05) 
Code Classi-
fication Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 82
931 Image Density 
adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Center valueCustom  
Mode 1
PPC 128
 SYS When the value 
increases, the image of  
the center step becomes  
darker. 1
932 Custom  Mode 2PPC 128
 SYS 1
933 Custom  Mode 3PPC 128
 SYS 1
934 Image Density  adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Light step  
valueCustom 
Mode 1
PPC 20
 SYS When the value 
increases, the image of  
the “light” step density  
becomes lighter. 1
935 Custom  Mode 2PPC 20
 SYS 1
936 Custom  Mode 3PPC 20
 SYS 1
937 Image Density  adjustment 
Fine adjust- 
ment of “man-
ual density”/ 
Dark step  
valueCustom  
Mode 1
PPC 20
 SYS When the value 
increases, the image of  
the “dark” step density  
becomes darker. 1
938 Custom  Mode 2PPC 20
 SYS 1
939 Custom  Mode 3PPC 20
 SYS 1
940 Image Density  adjustment 
Fine adjust- 
ment of “auto- 
matic density”Custom 
Mode 1
PPC 128
 SYS When the value 
increases, the image  
becomes darker. 1
941 Custom  Mode 2PPC 128
 SYS 1
942 Custom  Mode 3PPC 128
 SYS 1
943 Image Gamma data  slope adjust- 
mentCustom  
Mode 1
PPC 0
 SYS One’s place:
0: Equivalent to the set 
value 5 
1 to 9: Select the slope of  
Gamma curve (The 
larger the value is, the  
larger the slope  
becomes.)
Ten’s place: 
0: Equivalent to the set  
value 5 
1 to 9: Select the slope of  
low density (The smaller  
the value is, the darker 
the background  
becomes.) 
00: Use default value 1
944 Custom  Mode 2PPC 0
 SYS 1
945 Custom  Mode 3PPC 0
 SYS 1
976 Mainte- nance Equipment number (serial 
number) entry ALL - SYS When this adjustment is 
performed with this code,  
the setting code (08-995)  
is also performed auto- 
matically (10 digits). 1
Adjustment mode (05) 
Code Classi-
fication Items
Func-
tion Default
 RAM Contents
Proce-
dure
05/11 
						

							June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 83
2
2.2.7 Setting mode (08) (e-STUDIO200L/230/280)
Procedure 1 
* Press [FUNCTION CLEAR] to enter minus (-). 
Procedure 2 
Procedure 3 
Procedure 4 
* Press [FUNCTION CLEAR] to enter minus (-). 
Procedure 5 
* Press [HELP] to enter “-”.
The items in the setting code list can be set or ch anged in this setting mode (08).
(Stores value in RAM)
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key](Code) [START]
[Digital key]
*
[FUNCTION CLEAR]
[ENTER] or
[INTERRUPT]
Sets or
changes value
[CLEAR]
(Corrects value)[CANCEL]
[0][8]
[POWER] [POWER]OFF/ON
(Exit)[Digital key]
(Code) [START] [ENTER]
or
[INTERRUPT]
Adjustment value
cannot be changed
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key]
(Code) [START]
[CANCEL] or [CLEAR](Automatic setting)
[ENTER]
or
[INTERRUPT]
(Stores value in RAM)
[0][8]
[POWER] [POWER]
OFF/ON (Exit)
[Digital key]
(Code) [Digital key]
(Sub-code) [Digital key]
*
 [FUNCTION CLEAR]Sets or
changes value
[START] [START]
[ENTER]
or
[INTERRUPT] (Stores value
in RAM)
[CLEAR]
(Corrects value)[CLEAR]
(Corrects value)
[START]
[CANCEL]
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key]
(Code) [Digital key]
*[HELP]
[START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value) (Stores value in RAM)
Sets or
changes value
05/12 
						

							e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 84
Procedure 7 
Procedure 9 
Procedure 10 
Procedure 11 and 12 
*1.  Press [MONITOR/PAUSE] to enter “-”, when enteri ng telephone number.
*2.  The data are stored in SYS-RAM in procedure 11  and stored in NIC-RAM in procedure 12.
Procedure 14
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key]
(Code)[Digital key]
(Setting)
[CLEAR]
(Corrects value)
[START](HDD formatting)
[CANCEL]
[ENTER]
or
[INTERRUPT] (Stores value in RAM)
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key]
(Code) [Select icon]
[START] [CANCEL]
[ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value) (Stores value in RAM)
[0][8]
[POWER] [POWER]
OFF/ON
(Exit)
[Digital key]
(Code) [Digital key]
(1st setting) [Digital key]
(2nd setting)
[START] [START] [CANCEL]
[ENTER]or
[INTERRUPT]
[CLEAR]
(Corrects value) [CLEAR]
(Corrects value) (Stores value in RAM)
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key]
(Code) [Digital key]
or
[Software keyboard][START]
[CANCEL]
[CLEAR] 
(Corrects value)*2(Stores value in RAM)*1[MONITOR/PAUSE]
Sets or
changes value [ENTER]
[0][8]
[POWER] [POWER]
OFF/ON (Exit)
[Digital key]
(Code) [Digital key]
(Sub-code)
[CLEAR]
(Corrects value)
[START] [START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
Adjustment value
cannot be changed