NEC Neax2000 Ivs Command Manual
Have a look at the manual NEC Neax2000 Ivs Command Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 3 ND-45669 (E) Pag e 3 78 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 91 Number of times to resend the Selecting Sequence when NAK is returned in Phase 2 on No. 0 PortNote0:Not used 1:1 time 255 : 255 times 92 Number of times to resend the Selecting Sequence when no an- swer in Phase 2 on No. 0 PortNote0:Not used 1:1 time 255 : 255 times 93 Number of times to resend the Selecting Sequence when NAK is returned in Phase 3 on No. 0 PortNote0:Not used 1:2 times 255 : 255 times 94 Number of times to resend the Selecting Sequence when no an- swer in Phase 3 on No. 0 PortNote0:Not used 1:1 time 255 : 255 times 95 Delay before resending the Selecting Sequence when NAK is re- turned on No. 0 PortNote0:Not used 1: 128 msec increments 255 : 96 Delay before resending the text when WABT is returned on No. 0 PortNote0:Not used 1: 128 msec increments 255 : 98 Guard timer between texts on No. 0 PortNote0 :0-128 msec. 1 : 128-256 msec. 2 : 256-384 msec. 3 : 384-512 msec. 4 : 512-640 msec. 100 Function of No. 1 PortNote0 : No function 4:SMDR/PMS 5:SMDR 16 : Printer 0 17 : Printer 1 24 : MCI 101 Priority for data processing on No. 1 PortNote0:1st 1:2nd : Initial Data DATA1ST DATA 2ND DATA FUNCTION Note:Refer to Tables 3-1 through 3-5. AP INITIAL ~~ AP INITIAL ~ ~ AP INITIAL ~ ~ AP INITIAL ~~ AP INITIAL ~ AP INITIAL ~ AP INITIALRefer to Note 1 of CMD001-80.
ND-45669 (E) CHAPTER 3 Pag e 3 79 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 102 Message format on No. 1 Port (when 2nd data Note of CMD001-100 is set to 4) 0 : No data is sent out 3 : NEAX2400 IMS format 4 : NEAX1400 IMS format 6 : PMS (IMS format) Number of characters per line to be printed out on Note No. 1 port (when 2nd data of CMD001-100 is set to 16/17 0:Not used 2 : 80 characters 103 Number of lines per page on No. 1 port Note (when 2nd data of CMD001-102 is set to 2) 0 :No page 1 : No. of lines including space within a page (depends on size of print 88 : paper used) 104 Protocol on No. 1 Port (when the 2nd data of CMD001 – 100 is set to 4)Note0:Not used 1:Free wheel 6 :IMS procedures Number of lines per page to be printed out on No. 1 Port (when the 2nd data of CMD001–102 is set to 2)Note0 : No page 1: No. of lines to print within a page 88 : 105 Station Address (SA) of a message transmitted to No. 1 Port Note0:Not used 1: ASCII Code in BCD 255 : 106 Unit Address (UA) of a message transmitted to No. 1 PortNote0:Not used 1: ASCII Code in BCD 255 : 107 Timer for detecting the terminal no answer on No. 1 Port Note0:No data 1: 128 msec increments 255 : 109 Timer for detecting the end of block on No. 1 PortNote0:No data 1: 512 msec increments 255 : : Initial Data DATA1ST DATA 2ND DATA FUNCTION Note:Refer to Tables 3-1 through 3-5. AP INITIAL AP INITIAL AP INITIAL ~ AP INITIAL AP INITIAL~ AP INITIAL~ AP INITIAL~ AP INITIAL~ AP INITIAL~
CHAPTER 3 ND-45669 (E) Pag e 3 80 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 110 Timer for detecting non-data communication on No. 1 Port Note0:No data 1: 512 msec increments 255 : 111 Number of times to resend the Selecting Sequence when NAK is returned in Phase 2 on No. 1 PortNote0:Not used 1:1 time 255 : 255 times 112 Number of times to resend the Selecting Sequence when no an- swer in Phase 2 on No. 1 PortNote0:Not used 1:1 time 255 : 255 times 113 Number of times to resend Selecting SequenceNote when NAK is returned in Phase 3 on No. 1 Port 0 :Not used 1 :1 time 255 :255 times 114 Number of times to resend Selecting SequenceNote when no answer in Phase 3 on No. 1 Port 0:Not used 1 :1 time 255 :255 times 115 Delay before resending Selecting SequenceNote when NAK is returned on No. 1 Port0:Not used 1 : 128 msec increments 255 : 116 Delay before resending text when WATB isNote returned on No. 1 Port0:Not used 1 : 128 msec increments 255 : 118 Guard timer between texts on No. 1 PortNote0:0-128 msec. 1 :128-256 msec. 2 :256-384 msec. 3 :384-512 msec. 4 :512-640 msec. : Initial Data DATA1ST DATA 2ND DATA FUNCTION Note:Refer to Tables 3-1 through 3-5. AP INITIAL~ AP INITIAL~ ~ AP INITIAL~ ~ AP INITIAL ~~ AP INITIAL ~~ AP INITIAL ~ AP INITIAL ~
ND-45669 (E) CHAPTER 3 Pag e 3 81 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 120 Function of No. 2 PortNote0:No function 4 :SMDR/PMS 5 :SMDR 16 :Printer 0 17 :Printer 1 24 :MCI 121 Priority for data processing on No. 2 PortNote0:1st 1:2nd 122 Message format on No. 2 Port (when the 2nd data of CMD001 – 120 is set to 4)Note0 : No data is sent out 3 : NEAX2400 IMS format 4 : NEAX1400 IMS format 6 : PMS (IMS format) Number of characters per line to be printed out on No. 2 Port (when the 2nd data of CMD001–120 is set to 16/17)Note0:Not used 2 : 80 characters 123 Number of lines per page on No. 2 Port (when the 2nd data of CMD001–122 is set to 2)Note0 : No page 1 : No. of lines including space within a page (depends on size 88 : of print paper used) 124 Protocol on No. 2 Port (when the 2nd data of CMD001–120 is set to 4)Note0: Not used 1 : Free wheel 6 : IMS procedure Number of lines per page to be printed out on No. 2 Port (when the 2nd data of CMD001–122 is set to 2)Note0 : No page 1: No. of lines to print within a page 88 : 125 Station Address (SA) of a message transmitted to No. 2 Port Note0:Not used 1: ASCII Code in BCD 255 : 126 Unit Address (UA) of a message transmitted to No. 2 PortNote0:Not used 1: ASCII Code in BCD 255 : : Initial Data DATA1ST DATA 2ND DATA FUNCTION Note:Refer to Tables 3-1 through 3-5. Refer to Note 1 of CMD001-80. AP INITIAL AP INITIAL AP INITIAL~ AP INITIAL AP INITIAL~ AP INITIAL~ AP INITIAL~
CHAPTER 3 ND-45669 (E) Pag e 3 82 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 127 Timer for detecting the terminal no answer on No. 2 PortNote0:No data 1: 128 msec increments 255 : 131 Number of times to resend the Selecting Sequence when NAK is returned in Phase 2 on No. 2 PortNote0 : No page 1:1 time 255 : 255 times 132 Number of times to resend the Selecting Sequence when no an- swer in Phase 2 on No. 2 PortNote0:Not used 1:1 time 255 : 255 times 133 Number of times to resend the Selecting Sequence when NAK is returned in Phase 3 on No. 2 PortNote0:Not used 1:1 time 255 : 255 times 134 Number of times to resend the Selecting Sequence when no an- swer in Phase 3 on No. 2 PortNote0:Not used 1:1 time 255 : 255 times 135 Delay before resending the Selecting Sequence when NAK is re- turned on No. 2 PortNote0:Not used 1: 128 msec increments 255 : 136 Delay before resending the text when WABT is returned on No. 2 PortNote0:Not used 1: 128 msec increments 255 : 138 Guard timer between texts on No. 2 PortNote0 : 0-128 msec 1 : 128-256 msec 2 : 256-384 msec 3 : 384-512 msec 4 : 512-640 msec : Initial Data DATA1ST DATA 2ND DATA FUNCTION Note:Refer to Tables 3-1 through 3-5. AP INITIAL~ AP INITIAL~ AP INITIAL~ ~ AP INITIAL~ ~ AP INITIAL~ ~ AP INITIAL~ AP INITIAL~
ND-45669 (E) CHAPTER 3 Pag e 3 83 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 140 Function of No. 3 PortNote0 : No function 4:Not used 5:Not used 16 : Printer 0 17 : Printer 1 24 : MCI 141 Priority for data processing on No. 3 PortNote0:1st 1:2nd 142 Message format on No. 3 Port Note0 : No data is sent. 3:Not used 4:Not used 6:Not used Number of characters per line to be printed out on No. 3 Port (when the 2nd data of CMD001–140 is set to 16/17)Note0:Not used 2 : 80 characters 143 Number of lines per page on No. 3 Port (when the 2nd data of CMD001–142 is set to 2)Note0 : No page 1 : No. of lines including space within a page (depends on size 88 : of print paper used) Protocol on No. 3 PortNote0: Not used 1: Not used 6: Not used 144 Number of lines per page to be printed out on No. 3 Port (when the 2nd data of CMD001–142 is set to 2)Note0 : No page 1: No. of lines to print within a page 88 : 145 Station Address (SA) of a message transmitted to No. 3 Port Note0:Not used 1: ASCII Code in BCD 255 : 146 Unit Address (UA) of a message transmitted to No. 3 PortNote0:Not used 1: ASCII Code in BCD 255 : : Initial Data DATA1ST DATA 2ND DATA FUNCTION Note:Refer to Tables 3-1 through 3-5. AP INITIAL AP INITIAL AP INITIAL AP INITIAL~ AP INITIAL AP INITIAL~ AP INITIAL~ AP INITIAL~
CHAPTER 3 ND-45669 (E) Pag e 3 84 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 147 Timer for detecting the terminal no answer on No. 3 PortNote0:Not used 1: Not used 255 : 149 Timer for detecting the end of block on No. 3 PortNote0:No data 1: 512 msec increments 255 : 150 Timer for detecting non-data communication on No. 3 Port Note0:Not used 1: Not used 255 : 151 Number of times to resend the Selecting Sequence when NAK is returned in Phase 2 on No. 3 PortNote0:Not used 1: Not used 255 : 152 Number of times to resend the Selecting Sequence when no an- swer in Phase 2 on No. 3 PortNote0:Not used 1: Not used 255 : 153 Number of times to resend the Selecting Sequence when NAK is returned in Phase 3 on No. 3 PortNote0:Not used 1: Not used 255 : 154 Number of times to resend the Selecting Sequence when no an- swer in Phase 3 on No. 3 PortNote0:Not used 1: Not used 255 : 155 Delay before resending the Selecting Sequence when NAK is re- turned on No. 3 PortNote0:Not used 1: Not used 255 : 156 Delay before resending the text when WABT is returned on No. 3 PortNote0:Not used 1: Not used 255 : : Initial Data DATA1ST DATA 2ND DATA FUNCTION Note:Refer to Tables 3-1 through 3-5. AP INITIAL~ AP INITIAL~ AP INITIAL~ AP INITIAL~ AP INITIAL~ AP INITIAL~ AP INITIAL~ AP INITIAL~ AP INITIAL~
ND-45669 (E) CHAPTER 3 Pag e 3 85 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 158 Guard timer between texts on No. 3 PortNote0 : 0-128 msec 1 : 128-256 msec 2 : 256-384 msec 3 : 384-512 msec 4 : 512-640 msec 160 175Mask Data provision for 1st digit of Authorization Code Mask Data Provision for 16th digit of Authorization Code0 : Not provided 1 : No. of n (1-16) digit + 1 is provided 11 : No. of n (1-16) digit + 1 is provided 12 : “X” is provided. The data (digits) are masked by character “X” (e.g., 555XXXX). 179 Number of CCH card provided in the system (This data should be assigned only for the center office for Centralized Billing-CCIS)0:Not used 1:1 CCH card 2:2 CCH cards 3:3 CCH cards 4:4 CCH cards 199 PMS - Send and receive PMS messages using Block Check Code (BCC)0 : Without BCC 1:With BCC 239 Direction for sending of billing information from the local office (This data should be assigned only for the center office for Cen- tralized Billing-CCIS)0:Not used 1 : SMDR Terminal which is set to “4” by CMD001-80/100/120 2 : SMDR Terminal which is set to “5” by CMD001-80/100/120 : Initial Data DATA1ST DATA 2ND DATA FUNCTION Note:Refer to Tables 3-1 through 3-5. ~ ~ ~ ~
CHAPTER 3 ND-45669 (E) Pag e 3 86 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 Table 3-1 through Table 3-5 show the quick reference data table for the SMDR, printer, PMS, and MCI. Note 1:The Port 3 cannot be used for the SMDR (NEAX2400 IMS Format). Note 2:Use 2nd data=4 for either SMDR or PMS. If 2nd data=4 is assigned to Port 0 (1st data=80) for SMDR/PMS, assign 2nd data=5 to Port 1 (1st data=100) or Port 2 (1st data=120) for SMDR. Table 3-1 Quick Reference Data Table for SMDR (NEAX2400 IMS Format) : Initial Data 1ST DATA MEANING2ND DATAMEANING PORT 0 PORT 1 PORT 2 PORT 3 20 24 28 – Data speed 2/3/4/5 1200/2400/ 4800/9600 bps 21 25 29 – Stop bit length 0 /1/2 1/1.5/2 bits 22 26 30 – Data length 0 /1 7/8 bits 23 27 31 – Parity 0 /1/2 None Parity/Even Parity/Odd Parity 80 100 120 – Function 4/5 Note 2SMDR 81 101 121 – Priority for data processing 0 1st priority 82 102 122 – Message format 3 NEAX2400 IMS format 83 103 123 – Number of lines per page 0 Not used 84 104 124 – Protocol 1 Free wheel 85 105 125 – Station Address (SA) 48 0 86 106 126 – Unit Address (UA) 33 ! 87 107 127 – Timer for detecting terminal no answer 0 Not used 89 109 129 – Timer for detecting end of block 0 Not used 90 110 130 – Timer for detecting non data communication 0 Not used 91 111 131 – Number of times to resend Selecting Sequence when NAK is returned in Phase 20Not used 92 112 132 – Number of times to resend Selecting Sequence when no answer in Phase 20Not used 93 113 133 – Number of times to resend Selecting Sequence when NAK is returned in Phase 30Not used 94 114 134 – Number of times to resend Selecting Sequence when no answer in Phase 30Not used 95 115 135 – Delay before resending Selecting Sequence when NAK is returned0Not used 96 116 136 – Delay before resending text when WABT is returned0Not used 98 118 138 – Guard timer between texts 0 Not used
ND-45669 (E) CHAPTER 3 Pag e 3 87 Revision 2.0 CMD001 COMMAND CODE TITLE: SYSTEM FEATURES (2) D001 Note 1:The Port 3 cannot be used for the SMDR (NEAX2400 IMS Format). Note 2:Use 2nd data=4 for either SMDR or PMS. If 2nd data=4 is assigned to Port 0 (1st data=80) for SMDR/PMS, assign 2nd data=5 to Port 1 (1st data=100) or Port 2 (1st data=120) for SMDR. Table 3-2 Quick Reference Data Table for SMDR (NEAX1400 IMS Format) : Initial Data 1ST DATA MEANING2ND DATAMEANING PORT 0 PORT 1 PORT 2 PORT 3 20 24 28 – Data speed 2/3/4/5 1200/2400/ 4800/9600 bps 21 25 29 – Stop bit length 0 /1/2 1/1.5/2 bits 22 26 30 – Data length 0 /1 7/8 bits 23 27 31 – Parity 0 /1/2 None Parity/Even Parity/Odd Parity 80 100 120 – Function 4/5 Note 2SMDR 81 101 121 – Priority for data processing 0 1st priority 82 102 122 – Message format 4 NEAX2400 IMS format 83 103 123 – Number of lines per page 0 Not used 84 104 124 – Protocol 1 Free Wheel 85 105 125 – Station Address (SA) 48 0 86 106 126 – Unit Address (UA) 33 ! 87 107 127 – Timer for detecting terminal no answer 0 Not used 89 109 129 – Timer for detecting end of block 0 Not used 90 110 130 – Timer for detecting non data communication 0 Not used 91 111 131 – Number of times to resend Selecting Sequence when NAK is returned in Phase 20Not used 92 112 132 – Number of times to resend Selecting Sequence when no answer in Phase 20Not used 93 113 133 – Number of times to resend Selecting Sequence when NAK is returned in Phase 30Not used 94 114 134 – Number of times to resend Selecting Sequence when no answer in Phase 30Not used 95 115 135 – Delay before resending Selecting Sequence when NAK is returned0Not used 96 116 136 – Delay before resending text when WABT is returned0Not used 98 118 138 – Guard timer between texts 0 Not used