NEC Neax2000 Ivs Command Manual

							CHAPTER 3 ND-45669 (E)
Pag e 2 54
Revision 2.0
CM78
COMMAND CODE
TITLE:
DESTINATION OF SPLIT CALL FORWARDING
78
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the called number of Split Call Forwarding.
2. PRECAUTION:
None.
3. ASSIGNMENT PROCEDURE:
• To assign destination of Split Call Forwarding
• To cancel destination of Split Call Forwarding
1S T DATA 2ND DATA
DATA MEANING DATA MEANING DESTINATION
XXY XX Y
Block Number 
(0-7)
Tenant Number 
(00-63)X-XXX + + YY YY
Called Number 
(Max. 26 digits)
Separate Mark
Trunk Access Code 
(1-3 digits)Outside Party
X-XXXX Station Number 
(1-4 digits)Station
STDEDEEXE
++78 + + + +1ST DATA
(3 digits)2ND DATA
(1-29 digits)
STDEDE
++78 + + + +1ST DATA
(3 digits)FIRST DIGIT OF
TRUNK ACCESS CODE
/STATION NUMBER,
+EXE
+ CCC
,...
[CM78] Destination of Split Call Forwarding 
						

							ND-45669 (E) CHAPTER 3
Pag e 2 55
Revision 2.0
CM81
COMMAND CODE
TITLE:
TOLL RESTRICTION PATTERN ON EACH TRUNK RESTRICTION CLASS
81
1. FUNCTION:
Toll call restriction is controlled by combinations of the toll office code dialed and assigned station trunk
restriction class. With respect to toll call restriction, there are five kinds of trunk restriction classes:
Unrestricted (RCA), Non-Restricted-1 (RCB), Non-Restricted-2 (RCC), Semi-Restricted-1 (RCD), and
Semi-Restricted-2 (RCE). Since toll call restricting conditions for the same toll office code vary with the
trunk class, restricting patterns are made available so that toll call restriction can be executed on all
attempted outgoing toll calls.
2. PRECAUTION:
(1) Using CM00, 01 (Memory Clear), or Resident System Program, the data below is assigned
(0 = restricted, 3 = allowed).
(2) The restricted classes “00”, “14” and “15” are fixed; restricted classes “01” to “13” can be changed. 
3. ASSIGNMENT PROCEDURE:
The following command format is used to change the standard assignment data above to meet local
requirements:
 
TRUNK
RESTRICTION 
CLASSYY
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 00
TOLL RESTRICTION PATTERN NUMBER - TRUNK RESTRICTION CLASS
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 00
1 RCA 3033300033333030
2 RCB 3033000033000030
3 RCC 3030000030000030
4 RCD 3000000000000030
5 RCE 3000000000000030
ST + 81YY + DE + + DE + + EXETRUNK
RESTRICTION CLASS
(1 digit)DATA
(1 digit)
[CM81] Toll Restriction Pattern on Each Trunk Restriction Class 
						

							CHAPTER 3 ND-45669 (E)
Pag e 2 56
Revision 2.0
CM81
COMMAND CODE
TITLE:
TOLL RESTRICTION PATTERN ON EACH TRUNK RESTRICTION CLASS
81
4. DATA TABLE:
 
YY TRUNK RESTRICTION ASSIGNMENT DATA
No. MEANING No. MEANING DATA MEANING
01
13Toll Restriction Pattern:01
Number for each Class:131
2
3
4
5Unrestricted (RCA)
Non-Restricted-1 (RCB)
Non-Restricted-2 (RCC)
Semi-Restricted-1 (RCD)
Semi-Restricted-2 (RCE)0
1
2
3Restricted
Not used
Not used
Allowed
~~ 
						

							ND-45669 (E) CHAPTER 3
Pag e 2 57
Revision 2.0
CM85
COMMAND CODE
TITLE:
MAXIMUM DIGITS ON C.O. CALLS
85
MAT
4. DATA TABLE:
Note 1:If the office code is not assigned with this command, the maximum number of sending digits is
automatically set to “24”.
Note 2:Allows the development of a secondary table.
1. FUNCTION:
This command is used to define the maximum number of digits which can be dialed, after C.O. access,
given a specific first digit.
2. PRECAUTION:
(1) This command is included in MAT mode menu “B4” (Maximum number of digits [COM01]).
(2) This command is effective when CM35 YY = 76 is assigned.
3. ASSIGNMENT PROCEDURE:
: Initial Data
Y
AREA/OFFICE CODEMAXIMUM NUMBER OF SENDING DIGITS
(MND)
No. MEANING
0
7Area Code
Development
Pattern No. 0-7
0-4: For TR
5-7: For LCR
(See CM35
YY = 76;
CM8A, A000)X
X . . . X
(Max. 8 
digits)Area/Office Code, 
or its part00
01
02
24 
 
79
80
84
85
87Not used
1 digit
2 digits
24 digits
Note 1
79 digits
Go back to Area Code Development
Pattern No. 0 for Toll Restriction
(CM85 Y = 0)
Note 2
Go back to Area Code Development
Pattern No. 4 for Toll Restriction
(CM85 Y = 4)
Note 2
Go back to Area Code Development
Pattern No. 5 for LCR
(CM85 Y = 5)
Note 2
Go back to Area Code Development
Pattern No. 7 for LCR
(CM85 Y = 7)
Note 2
  +  85Y  +     +    +    +     +  STDE AREA/OFFICE CODE
(1 - 8 digits)DE MAXIMUM NUMBER
OF SENDING DIGITS
(2 digits)EXE
~~
~
~
~
~
~
~
~
~
[CM85] Maximum Digits on C.O. Calls 
						

							CHAPTER 3 ND-45669 (E)
Pag e 2 58
Revision 2.0
CM88
COMMAND CODE
TITLE:
AUTOMATIC PAUSE ENTRY TABLE
88
4. DATA TABLE:
Note:In this case, the caller is required to dial after confirming dial tone from a distant office.
1. FUNCTION:
This command is used to define the pause which is automatically provided with particular dialed digits
on an outgoing call.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
Y
BLOCK
NUMBERSETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
0 Designation of digits
requiring automatic 
pauseXX: 00 - 04 X
X . . . X
(Max. 7 
digits)Dialed digits before automatic 
pause.
(Exclusive of Access Code)
X: 0-9, A(*), B(#)
1 Provision of Automatic 
Pause0
3 
 
Not provided
Note
To provide
2 Timing of Automatic 
Pause1
2
3 
 
Variable (Set by CM41 Y=0, 
Function No. 38)
1.5 sec.
No pause
  +  88Y  +     +    +    +     +  STDE BLOCK NUMBER
(2 digits)DE DATA
(1 - 7 digits)EXE
~
~
~
[CM88] Automatic Pause Entry Table 
						

							ND-45669 (E) CHAPTER 3
Pag e 2 59
Revision 2.0
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
4. DATA TABLE:
4.1 Toll Restriction 
(Related CM35 YY = 11, 76)
1. FUNCTION:
This command is used to define the development tables used for Least Cost Routing (LCR) and Toll
Restriction (TR) features.
2. PRECAUTION:
This command is included in MAT mode menu “B5” (L.C.R. & T.R. - Develop - [COM01]) and “B6”
(L.C.R. & T.R. Pattern [COM01]).
3. ASSIGNMENT PROCEDURE:
: Initial Data
YYY 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
000
063
(RATN)Route Pattern No. 0
Route Pattern No. 631
(No.)TR(/LCR) Pattern for
6-digit Toll Restriction00000
255 00
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 1500
63
(TN No.)Tenant No. 0
Tenant No. 6300
63
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
200
207
(RATDN)Time Pattern No. 0
Time Pattern No. 70000
2330
(Time)000
063
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 15
(YYY = 100 - 115)
  +  8AYYY  +     +    +    +     +  STDE 1ST DATA
(1 - 8 digits)DE 2ND DATA
(1 - 5 digits)EXE
~~~
XXX
(See YYY = 
500 -755)
TR Pattern
No. 000 - 255)
00
~~~~~~
~~~
XX
Hours
00 - 23
Minutes
00/30
XX
~~
~~
[CM8A] LCR/Toll Restriction Development Table
(LPN)
(RT No.) 
						

							CHAPTER 3 ND-45669 (E)
Pag e 2 60
Revision 2.0
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
300
303
(RATWN)Date Pattern No. 0
Date Pattern No. 30
1
2
3
4
5
6
(Week)Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday000
063
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 15
(YYY = 100 - 115)
200
207
(RATDN)Time Pattern No. 0
Time Pattern No. 7
(YYY = 200 - 207)
400
404
(DCP)Area Code
Development
Pattern No. 0
Area Code Develop-
ment Pattern No. 4Area Code
(Max. 8 digits)
N: 2-9
X: 0-9000
063
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 15
(YYY = 100 - 115)
200
207
(RATDN)Time Pattern No. 0
Time Pattern No. 7
(YYY = 200 - 207)
300
303
(RATWN)Date Pattern No. 0
Date Pattern No. 3
(YYY = 300 - 303)
400
407
(DCP)Area Code Development
Pattern No. 0
Area Code Development
Pattern No. 4
900
915
(CP)Toll Restriction 
Pattern No. 0
Toll Restriction 
Pattern No. 15
: Initial Data
YYY 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
~~~~
~~
~~
~
~
NXX
1NXX
X
X . . . X
(DC)
~
~~
~~
~~
~~
~
~
~See
CM81~ 
						

							ND-45669 (E) CHAPTER 3
Pag e 2 61
Revision 2.0
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
500
755
(LPN)TR(/LCR) Pattern 
No. 000
TR(/LCR) Pattern 
No. 255000
(CP)Designation of Toll Re-
striction Pattern No. 
specified by CM8100
15 Toll Restriction 
Pattern No. 00
Toll Restriction 
Pattern No. 15
(See CM81)
020
(SAP)Designation of 6-digit 
Toll Restriction Pattern 
No.
(See YYY = 800-849)00
49
CCC 6-digit Toll Restriction 
Pattern No. 00
6-digit Toll Restriction 
Pattern No. 49
No 6-digit Toll Restriction
(YYY = 800-849)
021
028
(RCA
RCH)6-digit Toll Restriction 
on Trunk Restriction 
Class 1-80
1
 
Available
Not Available (To be desig-
nated by 1st Data = 000)
800
849
(SAP)6-digit Toll Restriction
No. 00
6-digit Toll Restriction
No. 49XXX
(Office 
Code)Office Code (3 digits) 0
1
 
(RES)Restricted
Allowed
: Initial Data
YYY 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
~~
~
~
~
~
~
~
~
~ 
						

							CHAPTER 3 ND-45669 (E)
Pag e 2 62
Revision 2.0
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
4.2 LCR
: Initial Data
Y Y Y 1S T  DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
000
063
(RATN)Route Pattern No. 0
Route Pattern No. 630
(No.)Designation of next table 
(Route Pattern No.)00
63
(RATN)Route Pattern No. 0
Route Pattern No. 63
1
2
3
4
(No.)1st
2nd
3rd
4th0000
25563
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 1500
63
(TN No.)Tenant No. 0
Tenant No. 6300
63
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
200
207
(RATDN)Time Pattern No. 0
Time Pattern No. 70000
2330
(Time)000
063
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 15
(YYY = 100 - 115)
300
303
(RATWN)Date Pattern No. 0
Date Pattern No. 30
1
2
3
4
5
6
(Week)Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday000
063
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 15
(YYY = 100 - 115)
200
207
(RATDN)Time Pattern No. 0
Time Pattern No. 7
(YYY = 200 - 207)
~~~~
~XXX
LCR/TR Pattern 
No. 000 - 255
(See YYY=500-
755)
Trunk Route
No. 00 - 63
XX
~~~~~~
~~~
XX
Hours
00 - 23
Minutes
00/30
XX
~~
~~
~~~~
~~
~~
Order of
Choice
(LPN)
(RT No.) 
						

							ND-45669 (E) CHAPTER 3
Addendum-001 Page 263
AUGUST, 1998 Revision 2.1
CM8A
COMMAND CODE
TITLE:
LCR/TOLL RESTRICTION DEVELOPMENT TABLE
8A
MAT
: Initial Data
YYY 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
400
407
(DCP)Area Code
Development
Pattern No. 0
Area Code
Development
Pattern No. 7Area Code
(Max. 8 digits)
N: 2-9
X: 0-9000
063
(RATN)Route Pattern No. 0
Route Pattern No. 63
(YYY = 000 - 063)
100
115
(TNP)Tenant Pattern No. 0
Tenant Pattern No. 15
(YYY = 100 - 115)
200
207
(RATDN)Time Pattern No. 0
Time Pattern No. 7
(YYY = 200 - 207)
300
303
(RATWN)Date Pattern No. 0
Date Pattern No. 3
(YYY = 300 - 303)
400
407
(DCP)Area Code Development
Pattern No. 0
Area Code Development
Pattern No. 4
X
X . . . X
(DC)Area Code
(Max. 5 digits)800
(IOFT)Intra-Office Termination
Area Code
(Max. 5 digits)
(includes LSC Access 
Code assigned by
CM20-A29)801
805
(IOFT)1-digit Intra-Office Station
5-digits Intra-Office Station
410
(ACP)Operator Call Code
Development No.X
XXXArea Code
(Max. 3 digits)
Note:Data effective 
only for access 
code assigned 
with CM20-A26000
063Route Pattern No. 00
Route Pattern No. 63
~
~
NXX
1NXX
X
X . . . X
(DC)
~
~~
~~
~~
~~
~
~
~
~~
~~~