NEC Neax2000 Ivs Command Manual
Have a look at the manual NEC Neax2000 Ivs Command Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 2 ND-45669 (E) Pag e 6 Revision 2.0 INFORMATION FOR DATA PROGRAMMING 2.1.2 CAT Mode Setting Procedure 2.1.3 Notice on the CAT Mode (1) CAT mode is used in on-line mode. Therefore, system data clear commands (CM00, CM01) cannot be accessed from the CAT. (2) To use the CAT after clearing all system data, perform the following operations on the system: (a) Plug a PN-2DLCB/4DLCA card into the LT00 slot of PIM0. (b) Connect the CAT (Multiline Terminal) to LEN0000 at the MDF. (c) Set SW3 on the MP card to “B”. (d) Depress SW1 on the MP card. (System Data All Clear) (e) Set SW3 on the MP card to “0”, and depress SW1. (On-Line mode) (f) Set the CAT mode on the Multiline Terminal. (3) During CAT mode, do not change or delete the following data: • CM10, My Line Number of the CAT. (4) There are no limitations on the number of Multiline Terminals in the system that can be programmed to allow CAT capability. However, the number of Multiline Terminals that can be placed into CAT mode, at the same time, is two. To set CAT mode: 1. Press 5. Press – CNF lamp flashes 2. Press 6. Press – CNF lamp flashes – CNF, SPKR, ANS lamp on 3. Press – “CAT MODE” displayed on LCD – CNF lamp off 7. Press 4. Press – “COMMAND=–” displayed on LCD Note: Steps 1 through 6 need to be completed within 4 seconds. To clear CAT mode: While “COMMAND =– is displayed on the LCD. 1. Lift handset (Off Hook) - SPKR lamp off. 2. Replace handset (On Hook) - CNF, ANS lamps off. - LCD returns to clock. TRFCNF CNF# * ST TRF
ND-45669 (E) CHAPTER 2 Page 7 Revision 2.0 INFORMATION FOR DATA PROGRAMMING 2.2 CAT Operation When setting the office data, it is necessary to enter the following three kinds of data: • Command Code • First Data • Second Data An explanation of the data entry procedure follows: (a) Operation for confirming the existing office data With the above entry completed, the present second data is displayed on the LCD. If the second data is not assigned yet, either the initial data value or “NONE” is displayed. (b) Operation for assigning (changing) the office data With EXE pressed, OK is displayed on the LCD. To confirm the data assigned, depress DE after entering the first data. (c) Use of button and button •If is pressed after setting the second data (after has been pressed), the next first data is displayed. • If is pressed after setting the second data (after has been pressed), the last data is dis- played. + Command Code + + First Data + STDEDE + Command Code + + First Data + + Second Data + + STDEDEDEEXE S– SEXE –EXE
CHAPTER 2 ND -4 5669 ( E) IN FORM ATIO N FO R DATA P RO GRAMM ING _ STC O M MAND = _ CO M MAND = 10 _ DE10> _ 10> 0000_ DE10> 0000 : NONE -_ 10> 0000 : NONE -300 EXEOK _ DE10> 0000 : 3 00 -_ S10> 0001 : NONE__ 10> 0001 : NONE -301 EXEOK _ DE10> 001 : 301 _ DE
ND -4 5669 ( E) CHAPTER 2 IN FORM ATION FO R DATA PR O GRAMM ING DECE DE10> _ 10> 0001_ DE10> 0001 : NONE -__ CE10> _ 10> 0000_ DE10> 0000 : NONE__ ¬ 10> 0001 : NONE -302 ¬10> 0001 : NONE -30__ 10> 0001 : NONE -301__ STC O M MAND = _ CO M MAND = 10 _ DE10> _ 10> 0000 DE10> 0000 : 3 00- 10> 0000 : 3 00 -C C C EXEOK DE10> 0000 : NONE
CHAPTER 2 ND -4 5669 ( E) IN FORM ATIO N FO R DATA P RO GRAMM ING
ND -4 5669 ( E) CHAPTER 2 IN FORM ATION FO R DATA PR O GRAMM ING
CHAPTER 2 ND -4 5669 ( E) IN FORM ATIO N FO R DATA P RO GRAMM ING
ND -4 5669 ( E) CHAPTER 2 IN FORM ATION FO R DATA PR O GRAMM ING
CHAPTER 2 ND -4 5669 ( E) IN FORM ATIO N FO R DATA P RO GRAMM ING
ND-45669 (E) CHAPTER 2 Page 15 Revision 2.0 INFORMATION FOR DATA PROGRAMMING Table 2-6 List of Commands for Each Business Feature For Business SystemF: First Data S : Second Data — : No Data FEATURECOMMAND 1S T DATA/2N D DATA (F/S)REMARKS CODE Y-YYY Account Code 08 – 362/S 12 02 F/S 15 30 F/1 20 0 – 3 F/085 42 – 10/S 90 00 F/F0085 Add-On Module 10 – F/S 12 05 F/0 30 18 F/0 41 1 09/S 90 00 – 03 F/S 98 0 F/S Alarm Indications – – – Alphanumeric Display 08 – 255/1 20 0 – 3 F/A10 35 03 F/S 77 0 – 3 F/S Analog Port Adapter 10 – F/S 13 09, 32 – 35F/S 90 00 F/S 93 – F/S