NEC Neax2000 Ivs Command Manual
Have a look at the manual NEC Neax2000 Ivs Command Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 377
CHAPTER 3 ND-45669 (E)
Pag e 3 34
Revision 2.0
CMB3
COMMAND CODE
TITLE:
UCD PEG COUNT
B3
MAT
1. FUNCTION:
This command allows accumulated traffic data related to the UCD Group to be read from the system.
2. PRECAUTION:
This command is included in MAT mode menu “D1” (Peg Count [COM03]).
3. ASSIGNMENT PROCEDURE:
• To display
• To clear individual data
• To clear all UCD PEG COUNT data
ST + B3Y + DE +DATA
(1 - 4 digits)+ DE
ST + B3Y + DE + TRUNK STATUS DATA + DE + CCC + EXE
ST + B39 +...](http://img.usermanuals.tech/thumb/54/84253/w64_nec-neax2000-ivs-command-manual_d-376.png "Page 377
CHAPTER 3 ND-45669 (E)
Pag e 3 34
Revision 2.0
CMB3
COMMAND CODE
TITLE:
UCD PEG COUNT
B3
MAT
1. FUNCTION:
This command allows accumulated traffic data related to the UCD Group to be read from the system.
2. PRECAUTION:
This command is included in MAT mode menu “D1” (Peg Count [COM03]).
3. ASSIGNMENT PROCEDURE:
• To display
• To clear individual data
• To clear all UCD PEG COUNT data
ST + B3Y + DE +DATA
(1 - 4 digits)+ DE
ST + B3Y + DE + TRUNK STATUS DATA + DE + CCC + EXE
ST + B39 +...")
![Page 381
CHAPTER 3 ND-45669 (E)
Pag e 3 38
Revision 2.0
CMD6
COMMAND CODE
TITLE:
ID CODE ALL CLEAR WITH AP
D6
1. FUNCTION:
This command is used for deleting all the ID Codes stored in the PN-AP01 card, at one time.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D60 + DE + 0000 + DE + CCC + EXE
[CMD6] ID Code All Clear With AP](http://img.usermanuals.tech/thumb/54/84253/w64_nec-neax2000-ivs-command-manual_d-380.png "Page 381
CHAPTER 3 ND-45669 (E)
Pag e 3 38
Revision 2.0
CMD6
COMMAND CODE
TITLE:
ID CODE ALL CLEAR WITH AP
D6
1. FUNCTION:
This command is used for deleting all the ID Codes stored in the PN-AP01 card, at one time.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D60 + DE + 0000 + DE + CCC + EXE
[CMD6] ID Code All Clear With AP")
![Page 385
CHAPTER 3 ND-45669 (E)
Pag e 3 42
Revision 2.0
CMD9
COMMAND CODE
TITLE:
CENTRALIZED BILLING DATA PORT ASSIGNMENT
D9
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the data port for sending billing information to a Centralized Office.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
YY 1ST DATA2ND DATA
RELATED
COMMAND
DATA MEANING
00 03 03 Centralized Billing data port assignment CMA7 YY = 03, 04
CM08-378
STEXE ++ + ++
D9YYDE1ST DATA
+DE2ND DATA
(2 digits) (2 digits)
[CMD9] Centralized Billing...](http://img.usermanuals.tech/thumb/54/84253/w64_nec-neax2000-ivs-command-manual_d-384.png "Page 385
CHAPTER 3 ND-45669 (E)
Pag e 3 42
Revision 2.0
CMD9
COMMAND CODE
TITLE:
CENTRALIZED BILLING DATA PORT ASSIGNMENT
D9
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the data port for sending billing information to a Centralized Office.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
YY 1ST DATA2ND DATA
RELATED
COMMAND
DATA MEANING
00 03 03 Centralized Billing data port assignment CMA7 YY = 03, 04
CM08-378
STEXE ++ + ++
D9YYDE1ST DATA
+DE2ND DATA
(2 digits) (2 digits)
[CMD9] Centralized Billing...")
![Page 386
ND-45669 (E) CHAPTER 3
CM DB
4. DATA T A BLE:
1. FUN CTIO N:
STDEDEEX E
+ +
D BYY + + + +
[CMDB] Call in g Num ber Develo pment Data](http://img.usermanuals.tech/thumb/54/84253/w64_nec-neax2000-ivs-command-manual_d-385.png "Page 386
ND-45669 (E) CHAPTER 3
CM DB
4. DATA T A BLE:
1. FUN CTIO N:
STDEDEEX E
+ +
D BYY + + + +
[CMDB] Call in g Num ber Develo pment Data")
CHAPTER 3 ND-45669 (E) Pag e 3 38 Revision 2.0 CMD6 COMMAND CODE TITLE: ID CODE ALL CLEAR WITH AP D6 1. FUNCTION: This command is used for deleting all the ID Codes stored in the PN-AP01 card, at one time. 2. PRECAUTION: None 3. ASSIGNMENT PROCEDURE: ST + D60 + DE + 0000 + DE + CCC + EXE [CMD6] ID Code All Clear With AP
ND-45669 (E) CHAPTER 3 CM D7 4. DAT A TABL E: 1. FUN CTIO N: ST + D7 Y + DE + ~ ~ ~ ~ ~~ ~ ~~
CHAPTER 3 ND-45669 (E) C M D7 4 Ass ig n m ent of t he m axi- ~ ~ ~ ~ ~ ~ AP INI TIAL ~ ~
ND-45669 (E) CHAPTER 3 Pag e 3 41 Revision 2.0 CMD7 COMMAND CODE TITLE: OAI CONTROL DATA D7 Note 1:OAI Function key number is assigned by CM90. Note 2:The digit code is assigned by CMD7 Y = 6. Note 3:The maximum number of operation codes is 16. Note 4:Digit number is assigned by CMD7 Y = 0. Note 5:Do not use * as a digit code. Note 6:The maximum number of operation codes is 128.
CHAPTER 3 ND-45669 (E) Pag e 3 42 Revision 2.0 CMD9 COMMAND CODE TITLE: CENTRALIZED BILLING DATA PORT ASSIGNMENT D9 4. DATA TABLE: 1. FUNCTION: This command is used to assign the data port for sending billing information to a Centralized Office. 2. PRECAUTION: None 3. ASSIGNMENT PROCEDURE: YY 1ST DATA2ND DATA RELATED COMMAND DATA MEANING 00 03 03 Centralized Billing data port assignment CMA7 YY = 03, 04 CM08-378 STEXE ++ + ++ D9YYDE1ST DATA +DE2ND DATA (2 digits) (2 digits) [CMD9] Centralized Billing Data Port Assignment
ND-45669 (E) CHAPTER 3 CM DB 4. DATA T A BLE: 1. FUN CTIO N: STDEDEEX E + + D BYY + + + + [CMDB] Call in g Num ber Develo pment Data
CHAPTER 3 ND-45669 (E) Pag e 3 44 Revision 2.0 CMDB COMMAND CODE TITLE: CALLING NUMBER DEVELOPMENT DATA DB 04 Ringing Tone 0-1499 Calling Number Development Table Number assigned by CMDC0 1 2 3Depends on CM35 YY=33 Not used Internal Ringing Tone External Ringing Tone 05 Calling Number/ Calling Name Display0 1Calling Number Display Calling Name Display 06 Call Waiting for each calling number0 1Not available Available 07 UCD Priority Queuing for each calling number0 Not priority Priority 12 Priority for name display 0 1Calling name received from network Name assigned by CMDB YY=00 30 Trunk Tenant Number for Calling Number Development and Type of Single Data Message Frame Format0 Trunk Tenant Number Development0 1Using Development Table for Trunk Tenant 00 (CMDC YY=00) Using Development Table for actual Trunk Tenant (CMDC YY=00-63) 1 Single Data Message Frame Format0 1With Time Parameter Without Time Parameter 90 Caller ID Receiver Memory All Clear0000 — CCC Clear Note:Before clearing data, SW1-1 to SW1-4 on CALLER ID Receiver Trunk should beset to “ON” (Make-busy); and after memory clear, restore them to “OFF”. 91 Caller ID Receiver Memory Clear for Development Table Number assigned by CMDC and Development Data assigned by CMDB 92 Caller ID Receiver Memory Clear for Development Data assigned by CMDB : Initial Data YY 1S T DATA 2 ND DATA No. MEANING DATA MEANING DATA MEANING
ND-45669 (E) CHAPTER 3 Pag e 3 45 Revision 2.0 CMDB COMMAND CODE TITLE: CALLING NUMBER DEVELOPMENT DATA DB Note 1:If assigning the destination station number as below, the Terminating System overrrides CM30 YY=02/03 for the selected Development Table. ****02 : Trunk Line Appearance ****03 : Trunk Line Appearance + TAS ****04 : Direct-in Termination ****09 : Automated Attendant ****11 : ATTCON + Trunk Line Appearance ****13 : TAS ****14 : Termination to ATTCON ****16 : Direct Inward System Access (DISA) ****19 : ATTCON + TAS ****20 : ATTCON + Trunk Line Appearance + TAS ****31 : DID, TIE, and any call which is not handled by the PBX Note 2:Destination Station number can be LCR access code + outside telephone number.
CHAPTER 3 ND-45669 (E) Pag e 3 46 Revision 2.0 CMDC COMMAND CODE TITLE: CALLING NUMBER DEVELOPMENT TABLE DC 4. DATA TABLE: 1. FUNCTION: This command is used to assign the calling number development table number for CALLER ID, to each calling number. 2. PRECAUTION: Clearing all data in memory for calling number development (CMDB YY=90) is necessary before assigning the calling number development data by CMDB and CMDC. The development data by CMDB and CMDC are assigned toward the first CIR card (PN-4RSTC), which has been assigned a minimum Slot Number. When providing multiple CIR cards, save the development data and load them for the other CIR cards using a MAT. For details of the procedure, refer to the Feature Programming Manual. 3. ASSIGNMENT PROCEDURE: : Initial Data Y Y 1S T DATA 2ND DATA No. MEANING DATA MEANING DATA MEANING 00-63 Trunk Tenant Number X...XXX Calling Number 0-1499 Calling Number Development Table Number STDEDEEXE ++DCYY + + + +CALLING (1-24 digits)NUMBERDEVELOPMENT (1-4 digits) TABLE No. [CMDC] Calling Number Development Table
ND-45669 (E) CHAPTER 3 Pag e 3 47 Revision 2.0 CME0 COMMAND CODE TITLE: INITIALIZATION E0 4. DATA TABLE: Note:For the Data “MMDDHHMM”, enter the Month, Date, and Time (hour and minute) of the time, as shown below. MM : Month (01 (Jan.) – 12 (Dec.)) DD : Date (01 – 31) HH : Hour (00 – 24) MM : Minute (00 – 59) 1. FUNCTION: This command allows the maintenance personnel to reset the system with the CAT. 2. PRECAUTION: If the setting data (Month, Day and Time) is different from the current time of the system clock (set by command 02), any request to initialize the system is not accepted and “DATA ERROR” is displayed. 3. ASSIGNMENT PROCEDURE: Y TYPE OF INITIALIZATION SETTING DATA RELATED COMMAND No. MEANING No. MEANING DATA MEANING 2 System Initialization 2000 MP Reset MM DD HH MM NoteCurrent time dis- played on Multiline Terminal/SN610 ATTCON 5 Desired FP/AP Initialization00 15FP/AP Number 00 FP/AP Number 15To request the ini- tialization immedi- ately.CM02 CM05 ST + E0Y + DE +TYPE OF INITIALIZATION (2 - 4 digits)+ DE +DATA (8 digits)+ EXE ~~ [CME0] Initialization