NEC Neax2000 Ivs Command Manual

							CHAPTER 3 ND-45669 (E)
Pag e 3 68
Revision 2.0
CMF8
COMMAND CODE
TITLE:
SPECIAL COMMANDS
F8
4. DATA TABLE:
Note 1:The ID code received from the Interactive Voice Response (IVR) unit must be entered.
Note 2:The Special ID Code can be entered when the ID code is not provided due to trouble with the IVR
unit. The Special ID code is effective for 3 days (4320 minutes). If the exact ID code is not entered
within 3 days of entering the Special ID Code, you will be restricted for MAT/CAT operation.
1. FUNCTION:
This command is used to assign the ID code to protect a copy of the Key FD.
2. PRECAUTION:
This command requires a system reset after data setting.
3. ASSIGNMENT PROCEDURE:
YY 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
0 Display of Serial 
Number0
1
2Serial # C (for PN-CP00)
Serial # A (for Key FD #2)
Serial # B (for Key FD #1)X .... X Serial Number 
(Max. 14 digits)
X:ASCII Code 
(20H-7DH)
3 ID Code for Key FD 0 ID Code Entry/Display of ID Code
Note 1X .... X ID Code (10 digits) 
X=0-9
CCC: Cancel
1 Display of remaining time for Special 
ID Code
Special ID Code Entry
Note 20000
43200 – 4320 minutes 
0 – 4320 minutes
2 Display of Validity/Invalidity for
entered ID Code0
1Valid ID Code
Invalid ID Code
STDEDEEXE
++F8Y + + + +1ST DATA 2ND DATA
(1 digit) (1-10 digits)
~
[CMF8] Special Commands 
						

							ND-45669 (E) CHAPTER 3
Pag e 3 69
Revision 2.0
CMD000
COMMAND CODE
TITLE:
SYSTEM FEATURES (1)
D000
4. DATA TABLE:
1. FUNCTION:
This command is used to assign SMDR and PMS functions.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
2 Designation of the language in which the messages are to be print-
ed out. 0 : Japanese
1 : English
11 By Check-In operation (   + Station No. +  ), check-
in time information has overflowed.0 : Not available
1 : Available
41 Action when the memory storing the call information for the 
SMDR Terminal has overflowed. 0 : No new data is stored.
1 : New data is stored by deleting the 
oldest data.
56 Expansion Memory card (PN-ME00) is provided  0 : Not provided
1 : To provide
60 Contents of the dial information to be sent out to the SMDR.  0 : Only the called party’s number is 
sent out.
1 : (The access code is not included.) 
All the dial information inclusive of 
the access code is sent out.
69 Change Guest Name by room change message from the PMS. 0 : Not available
1 : Available
70 SMDR service for incoming call 0 : Effective only for incoming calls 
with an Account code entered
1 : Effective for all incoming calls
71 5 digits station output 0 : No
1:Yes
STDE + D000 + ++DE
(0/1)  2ND DATA
+ + EXE(1 – 3 digits) 1 S T  D ATA
CHK INSET
[CMD000] System Features (1) 
						

							CHAPTER 3 ND-45669 (E)
Page 370 Addendum-001
Revision 2.1 AUGUST, 1998
CMD000
COMMAND CODE
TITLE:
SYSTEM FEATURES (1)
D000
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION
72 The Authorization Code is printed out. 0 : No
1 : Yes
76 Sending call information for tandem calls through CCIS 0 : Not sent
1:To send
77 Sending of detail information of tandem calls to SMDR terminal, 
which is set to “4” by CMD001-80/100/1200:Not sent
1:To send
78 Sending of detail information of tandem calls to SMDR terminal, 
which is set to “5” by CMD001-80/100/1200:Not sent
1:To send
79 Contents of tandem call information to be sent to CCIS or SMDR 
terminal0 : Only outgoing call information
1 : Both outgoing and incoming call 
information
87 Send the Check Out Message ON/OFF Report to the PMS when 
the PBX receives the Check Out Message from the PMS0:Not sent
1 To send
88 Send the message to the PMS, where the Check Out station is orig-
inating a C.O. call0:Not sent
1 To send
103 Designation of Printer Line Feed Code 
(Depends on the printer provided)0:CR
1 CR and LF
114 Send the Controlled Restriction message to the PMS when 
setting the Do Not Disturb feature0:Not sent
1 To send
115 Send the Controlled Restriction message to the PMS when 
setting the Room Cut Off feature0:Not sent
1 To send
116 Send the Message Waiting message to the PMS when setting the 
Message Waiting feature0:Not sent
1 To send
119 The Maid Status message to the PMS when setting the Maid 
Status by guest room telephone or the front desk instrument0:To send
1Not sent
134 The Wake Up message to the PMS when setting the Wake Up 
feature0:Not sent
1 To send
135 The result of Wake Up message when performing the Wake Up 
call feature0:Not sent
1 To send
136 Send text (Message Waiting control text sending is available) to 
VMS when resetting PN-AP000:To send
1:Not sent
137 Number of digits for station number in message format to commu-
nicate with message center0 : 6 digits
1 : 8 digits 
						

							ND-45669 (E) CHAPTER 3
Addendum-001 Page 371
AUGUST, 1998 Revision 2.1
CMD000
COMMAND CODE
TITLE:
SYSTEM FEATURES (1)
D000
138 MCI/Printer for No. 3 Port
Note:No. 3 port on the PN-AP00 card can be only connected
to the VMS or printer which the RTS signal from the PN-
AP00 card is not needed.0:Not provided
1:To provide
140 Send a Violation Code Message when PBX receives an illegal 
message from PMS0:Not sent
1:To send
141 Send Violation Code message when PBX receives an undefined 
FTC message from PMS0:Not sent
1:To send
142 Send Violation Code message when PBX receives an undefined 
FC message from PMS0:Not sent
1:To send
143 Send ANI to SMDR 0 : Not sent
Note:In this case, ANI is not sent to
SMDR, but area code for calling
party, area code for called party;
authorization code is sent to the
SMDR.
1:To send
150 Specify system to not print Maid Status Record. 0 : Not available
1:Available
176 Designation of Call Charge 0 : Call charge by PN-AP00
1 : Call charge by Advice of Charge 
(AOC) from ISDN network
208 Check In/Check Out time is printed in the call charge print by 
checkout operation.
0:Not available
1:Available
209 Room Status is printed in the call charge print by checkout opera-
tion.0:Not available
1:Available
238 Display of year 0 : Not displayed
1:To display
: Initial Data
1ST DATA
2ND DATA
DATA FUNCTION 
						

							CHAPTER 3 ND-45669 (E)
Pag e 3 72
Revision 2.0
CMD001
COMMAND CODE
TITLE:
SYSTEM FEATURES (2)
D001
4. DATA TABLE:
1. FUNCTION:
This command is used to assign various SMDR and PMS functions, and the interface conditions for the
SMDR terminal, printer and PMS.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
DATA1ST DATA
2ND DATA
FUNCTION
1 Method of charging a transferred call
• In the following are shown the stations to which call charging 
is to be made in the case of various transfer patterns.
2ND 2ND 2ND
DATA=0
DATA=1D ATA = 2
• Call transfer from Split charging
STA A to STA B to STA A & STA B STA A
STA B
Call transfer from
a station (STA) to STA STA STA
ATTCON
• Call transfer from
ATTCON to a STA STA STA
station (STA)
• Call transfer from Split charging
ATTCON A to to ATTCON A ATTCON ATTCON
ATTCON B and ATTCON B B A
0 : Split charging to both the transfer 
destination station and the transfer-
ring station.
1 : Charging to the transfer destination 
station.
2 : Charging to the transferring station.
Note:Refer to Tables 3-1 through 3-5.
STDE + D001 + ++DE
(1 digits)  2ND DATA
+ + EXE(1–3 digits)  1ST DATA
[CMD001] System Features (2) 
						

							ND-45669 (E) CHAPTER 3
Pag e 3 73
Revision 2.0
CMD001
COMMAND CODE
TITLE:
SYSTEM FEATURES (2)
D001
4 Printout function of Check-In time and Checkout time, when the 
Checkout is set from a Front Desk Instrument.0 : Not available
1 : Available
5 Clearing of Check-In and setting of Room Cutoff service are exe-
cuted.0 : Not available
1 : Available
6 Designation of the number of line feeds after printing. 0 : No line feed
1 : 1 line feed
10 : 10 line feeds
11 Printout function of Room Status Information, when the Checkout 
is set from a Front Desk Instrument.0 : Not available
1 : Available
12 Assignment of Room Status Code to be set by Check-In operation 
(  + Station No. +   )
(Relevant command is CMD015, CMD016 – XX06 and 
CMD031.)0 : Inva li d
1:
Room Status Code
8:
13 Assignment of Maid Status Code to be set by Checkout operation 
(  + Station No. +   )0 : Inva li d
1:
2:
Maid Status Code
8:
14 Check-In/Checkout function by a Hotel/Motel Front Desk Instru-
ment.1 : Available (if DATA 5 = 1)
2 : Not available
19 Sending the Message Waiting/Restriction Level/Wake-Up mes-
sage to PMS.1 : Not available
2 : Available
20 Data Speed for No. 0 PortNote0:Not used
1 : 300 bps
2 : 1200 bps
3 : 2400 bps
4 : 4800 bps
5 : 9600 bps
21 Stop Bit Length for No. 0 PortNote0 : 1 bit
1 : 1.5 bits
2 : 2 bits
22 Data Length for No. 0 PortNote0 : 7 bits
1 : 8 bits
: Initial Data
DATA1ST DATA
2ND DATA
FUNCTION
Note:Refer to Tables 3-1 through 3-5.
~
~
CHK INSET
~
CHK INRESET
~
AP INITIAL
AP INITIAL
AP INITIAL 
						

							CHAPTER 3 ND-45669 (E)
Pag e 3 74
Revision 2.0
CMD001
COMMAND CODE
TITLE:
SYSTEM FEATURES (2)
D001
23 Parity for No. 0 PortNote0:No parity
1:Even parity
2:Odd parity
24 Data Speed for No. 1 PortNote0:Not used
1 : 300 bps
2 : 1200 bps
3 : 2400 bps
4 : 4800 bps
5 : 9600 bps
25 Stop Bit Length for No. 1 PortNote0 : 1 bit
1 : 1.5 bits
2 : 2 bits
26 Data Length for No. 1 PortNote0 : 7 bits
1 : 8 bits
27 Parity for No. 1 PortNote0:No parity
1:Even parity
2:Odd parity
28 Data Speed for No. 2 PortNote0:Not used
1 : 300 bps
2 : 1200 bps
3 : 2400 bps
4 : 4800 bps
5 : 9600 bps
29 Stop Bit Length for No. 2 PortNote0 : 1 bit
1 : 1.5 bits
2 : 2 bits
30 Data Length for No. 2 PortNote0 : 7 bits
1 : 8 bits
31 Parity for No. 2 PortNote0:No parity
1:Even parity
2:Odd parity
: Initial Data
DATA1ST DATA
2ND DATA
FUNCTION
Note:Refer to Tables 3-1 through 3-5.
AP INITIAL
AP INITIAL
AP INITIAL
AP INITIAL
AP INITIAL
AP INITIAL
AP INITIAL
AP INITIAL
AP INITIAL 
						

							ND-45669 (E) CHAPTER 3
Pag e 3 75
Revision 2.0
CMD001
COMMAND CODE
TITLE:
SYSTEM FEATURES (2)
D001
32 Data Speed for No. 3 PortNote0:Not used
1 : 300 bps
2 : 1200 bps
3 : 2400 bps
4 : 4800 bps
5 : 9600 bps
33 Stop Bit for No. 3 PortNote0
: 1 bit
1 : 1.5 bits
2 : 2 bits
34 Data Length for No. 3 PortNote0 : 7 bits
1 : 8 bits
35 Parity for No. 3 PortNote0:No parity
1:Even parity
2:Odd parity
36 Message format which is sent to VMS with MCI 0 : Conventional (without ANI)
1 : Expanded (with ANI)
39 Expansion RAM card (SRAM card) for PN-ME00 card is 
provided.0 : Not provided
1:Provided
80 Function of No. 0 PortNote0 : No function
4:SMDR/PMS
5:SMDR 
16 : Printer 0
17 : Printer 1
24 : MCI
Note 1:Two SMDR terminals or one SMDR terminal + one PMS terminal can be provided in one
system via the No. 0 through No. 2 port. The kind of call information that is sent to the
SMDR terminal can be specified respectively by CMD016-XX16, XX17, XX21, XX22, XX30
and XX55. To the PMS terminal, only CMD016-XX16 is available. The following table
shows examples of the configuration and its data setting.
: Initial Data
DATA1ST DATA
2ND DATA
FUNCTION
Note:Refer to Tables 3-1 through 3-5.
AP INITIAL
AP INITIAL
AP INITIAL
AP INITIAL
AP INITIALNote 1 
						

							CHAPTER 3 ND-45669 (E)
Pag e 3 76
Revision 2.0
CMD001
COMMAND CODE
TITLE:
SYSTEM FEATURES (2)
D001
81 Priority for data processing on No. 0 PortNote0:1st
1:2nd
82 Message format on No. 0 Port Note
(when 2nd data of CMD001-80 is set to 4)0 : No data is sent.
3 : SMDR (NEAX2400 IMS format)
4 : SMDR (NEAX1400 IMS format)
6 : PMS (IMS format)
Number of characters per line to be printed out on Note
No. 0 port (when 2nd data of CMD001-80 is set to 16/17)0:Not used
2 : 80 characters
83 Number of lines per page on No. 0 port Note
(when 2nd data of CMD001-82 is set to 2)0
:No page
1 : No. of lines including space within
: a page (depends on size of print
88 : paper used)
84 Protocol on No. 0 Port (when 2nd data of Note
CMD001-80 is set to 4)0:Not used
1 : Free wheel
6 : IMS procedure
Number of lines per page to be printed out on Note
No. 0 port (when 2nd data of CMD001-82 is set to 2)0 : No page
1:
: No. of lines to print within a page
88 :
85 Station Address (SA) of a message transmitted to Note
No. 0 Port0:Not used
1:
:
255 :
48
:
PORT 
No.FUNCTION
(PROVIDED TERMINAL)CALL INFORMATION
SENT TO TERMINALDATA SETTINGS
0 SMDR C.O. Outgoing Calls 
Tie Line Outgoing CallsCMD001 -80 : 4
CMD016 -XX16 : 1
-XX21 : 1
: Initial Data
DATA1ST DATA
2ND DATA
FUNCTION
Note:Refer to Tables 3-1 through 3-5.
AP INITIAL
AP INITIAL
AP INITIAL~
AP INITIAL
AP INITIAL~
AP INITIAL~ 
						

							ND-45669 (E) CHAPTER 3
Pag e 3 77
Revision 2.0
CMD001
COMMAND CODE
TITLE:
SYSTEM FEATURES (2)
D001
PORT 
No.FUNCTION
(PROVIDED TERMINAL)CALL INFORMATION 
SENT TO TERMINALDATA SETTINGS
1 SMDR C.O. Outgoing Calls 
Tie Line Outgoing CallsCMD001 -80 : 5
CMD016 -XX17 : 1
-XX22 : 1
0 PMS C.O. Outgoing Calls CMD001 -100 : 4
CMD016 -XX16 : 1
PORT 
No.FUNCTION
(PROVIDED TERMINAL)CALL INFORMATION 
SENT TO TERMINALDATA SETTINGS
0 SMDR C.O. Outgoing Calls  CMD001 -80 : 4
CMD016 -XX16 : 1
1 SMDR Tie Line Outgoing Calls 
Incoming CallsCMD001 -100 : 5
-XX22 : 1
-XX55 : 1
: Initial Data
DATA1ST DATA
2ND DATA
FUNCTION
86 Unit Address (UA) of a message transmitted to No. 0 PortNote0:Not used
1:
ASCII Code in BCD
255 :
33 : !
87 Timer for detecting the terminal no answer on No. 0 PortNote0:No data
1:
128 msec increments
255 :
89 Timer for detecting the end of block on No. 0 PortNote0:No data
1:
512 msec increments
255 :
90 Timer for detecting non-data communications on No. 0 Port
Note0:Not used
1:
512 msec increments
255 :
Note:Refer to Tables 3-1 through 3-5.
AP INITIAL~
AP INITIAL~
AP INITIAL~
AP INITIAL
~