NEC Neax2000 Ivs Command Manual

							CHAPTER 3 ND-45669 (E)
Pag e 1 08
Revision 2.0
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
4. DATA TABLE:
Service Class A : Initial Data
YY/YYY SERVICE 
REST. 
CLASS (A)SETTING DATA
No. MEANING DATA MEANING
00 Call Forwarding – All Calls 00
150
1
 
Restricted
Allow
01 Call Hold
02 Trunk Queueing – Outgoing
03 Call Back
04 Guest Name Display via PMS 0
1 Allow
Restricted
05 Executive Override (Calling side) 0
1 Restricted
Allow
06 System Speed Dialing
07 Station Speed Dialing
08 Paging Access (External Speaker and Radio)
09 Executive Override/Busy Verification (Called 
side)
10 Call Forwarding – No Answer
11 Call Forwarding – Busy Line
12 Call Forwarding – Busy Line/No Answer
13 Wake Up Timed Reminder
14 Call Pickup – Direct
15 Call Forwarding – Destination
16 Camp-On by Station (Transfer Method)
17 Priority Call 0
18 Priority Call 1
19 Do Not Disturb from Station/Return Message 
Schedule
20 Wake Up call assignment for guest station from 
predetermined station (serial setting for multiple 
stations with same time)
21 Wake-up call assignment for guest station from 
predetermined station (serial setting for multiple 
stations with different time)
22 Trunk to Trunk Transfer
~ 
						

							ND-45669 (E) CHAPTER 3
Pag e 1 09
Revision 2.0
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
24 Message Waiting Lamp set/reset from the sta-
tion00
150
1 Restricted
Allow
25 Timed Queue
26 Call Forwarding – All Calls – Outside
27 Call Forwarding – No Answer – Outside
28 Call Forwarding – Busy Line – Outside
29 Call Forwarding – Busy Line – Outside/
No Answer – Outside
30 Account Code
31 Authorization Code/Forced Account Code
32 BGM on Multiline Terminal
33 Digital Announcement Trunk Access (Record/
Replay/Delete)
34 Announcement Service (Replay)
- No. 0 Announcement Service Group
35 Announcement Service (Replay)
- No. 1 Announcement Service Group
36 Announcement Service (Replay)
- No. 2 Announcement Service Group
37 Announcement Service (Replay)
- No. 3 Announcement Service Group
38 Announcement Service (Replay)
- No. 4 Announcement Service Group
39 Announcement Service (Recording)
40 Message Waiting Lamp Control from predeter-
mined station or ATTCON
41 Voice Message Waiting Service
- System/Individual (Set/Cancel/Retrieve)
42 Voice Message Waiting Service
- System (Recording)
43 Camp-On by Station (Call Waiting Method)
(Set - Calling Side)Service Class A : Initial Data
YY/YYY SERVICE 
REST. 
CLASS (A)SETTING DATA
No. MEANING DATA MEANING
~ 
						

							CHAPTER 3 ND-45669 (E)
Page 110 Addendum-002
Revision 2.2 JANUARY, 1999
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
Note:Monitoring telephone conversations may be illegal under certain circumstances and laws.
 Consult a legal ad-
visor before implementing the monitoring of telephone conversations.
 Some federal and state laws require a
party monitoring a telephone conversation to use beeptone(s), to notify all parties to the telephone conversa-
tion, and/or to obtain consent from all parties to the telephone conversation. Some of these laws provide strict
penalties for illegal monitoring of telephone conversations.
Service Class A : Initial Data
YY/YYY SERVICE 
REST. 
CLASS (A)SETTING DATA
No. MEANING DATA MEANING
44 Camp-On by Station (Call Waiting Method)
(Answer - Called Side)00
150
1 Restricted
Allow
46 Call Back - Multiple Assignment
47 Message Reminder (Setting Side)
48 Message Reminder (Set Side)
49 Internal Zone Paging Access/All Zone Internal 
Paging
95 Number of digits on the LCD of the Multiline 
Terminal00
150
1 24 digits
16 digits
100 Voice Message Waiting Service - Individual 
(Called Side)00
150
1 Restricted
Allow
102 Voice Message Waiting Service - Individual All 
clear when the called station is no answer (Call-
ing/Called Side)
103 Station to station/Station to Trunk Call Monitor-
ing (monitoring side) Note
104 Station to station/Station to Trunk Call Monitor-
ing (monitored side) Note
110 Digital Announcement Trunk Access 
(Record/Replay/Delete)
111 Whisper Page (Whispering Side)
112 Whisper Page (Whispered Side)
~
~
~ 
						

							ND-45669 (E) CHAPTER 3
Addendum-002 Page 110-1
JANUARY, 1999 Revision 2.2
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
Service Class A : Initial Data
YY/YYY SERVICE 
REST. 
CLASS (A)SETTING DATA
No. MEANING DATA MEANING
115 PS Call Forwarding-Not Available 00
150
1 Allow
Restricted
116 Voice Guide (Validity of data set by CM48 Y=2 
first data 12, 13, 14.)0
1 Restricted
Allow
117 Roaming Service 0
1 Allow
Restricted
119 Simultaneous Paging Class
120 Dynamic Dial Pad
124 Remote Hold
127 WCS Numbering Sharing station number which 
is informed to calling/called party, SMDR and 
MCI.00
150
1 Main station number 
is informed
Sub station number
(own station number) 
is informed
128 WCS Numbering Sharing setting/cancelling 
Number Sharing from sub station.00
150
1 Allowed
Restricted
129 WCS Numbering Sharing whether sub station is 
controlled as same as main station, by a Message 
Waiting lamp control signal sent to main station.
Note:This assignment is effective only when
the system is an Integrated type.00
150
1 Main station and sub 
station are controlled 
Only main station is 
controlled
~
~
~
~ 
						

							THIS PAGE INTENTIONALLY LEFT BLANK.
CHAPTER 3 ND-45669 (E)
Page 110-2 Addendum-001
Revision 2.1 AUGUST, 1998
This page is for your notes. 
						

							ND-45669 (E) CHAPTER 3
Pag e 1 11
Revision 2.0
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
Note:To provide the Multiline Terminal Attendant Position, data “0” must be assigned to a different Service Restric-
tion Class Number than for regular Multiline Terminal Stations.
For example:
CLASS No.00 (ATT Position) CLASS No.15 (Station)
YY=71 0 1
YY=73 0 1
Service Class B : Initial Data
YY/YYY SERVICE 
REST. 
CLASS (B)SETTING DATA
No. MEANING DATA MEANING
53 TAS Service 00
150
1
 
Restricted
Allow
55 Individual Trunk Access from station
56 Change of mode for CAT
59 Starting up MSF from PB telephone/Multiline 
Terminal by using an access code
60 Day/Night Mode Change by Station Dialing
61 Periodic Time Indication Tone Sending
62 Front Desk Instrument (Multiline Terminal)
63 Privacy Release
64 Dual Hold
66 Inhibit Override by Do Not Disturb
67 Voice Call (Called Side)
68 Off-Hook Ringing
69 Conference Trunk (PN-CFTA) Access for con-
ference leader
70 Group Listening 00
150
1
 
Allow
Restricted
71 Attendant Position ClassNote0
1
 
Attendant Terminal
Ordinary Station
72 Automatic Hold 0
1
 
Allow
Restricted
73 Attendant Position ICI / OPE keyNote0
1
 
ICI / OPE key
Regular Station
75 Maid Status 00
150
1Restricted
Allow
78 Set stations to voice first for Station to Station 
calls00
150
1Voice Call D
term
Ring Dterm
~
~
~
~ 
						

							CHAPTER 3  ND-45669  (E)
C M 15
MAT
Serv ic e  Class C   : In itia l Data
~
~
~
~
~
~
~
~
~
~
~
~ 
						

							ND-45669 (E) CHAPTER 3
Pag e 1 13
Revision 2.0
CM15
COMMAND CODE
TITLE:
SERVICE RESTRICTION CLASS
15
MAT
Note 1:The tone indication pattern is assigned by the combination of data in YY=83 and YY = 84
Note 2:The result of a Switch Hook Flash during a station-to-station call is specified by the combination
of data in YY= 88 and YY = 89.
Note 3:The result of a Switch Hook Flash during a C.O. line Connection is specified by the combination
of data in YY=90 and YY = 91.
Note 4:Automatic Allocation is available by Multiline Terminal with LCD for call park-system.
Note 5:Service for an Off Hook Alarm call which encounters a busy terminating station is specified by
the combination of data in YY=97 and YY = 98
Note 6:Call Waiting is automatically set, when UCD is not set.
: Initial Data
YY 83 84 MEANING OF DATA
Setting Data 0 0 600 + 700 [Hz] Modulating Signal
1 0 1024 + 1285 [Hz]/16 [Hz] Modulating Signal
0 1 480 + 606 [Hz]/8 [Hz] Modulating Signal
1 1 480 + 606 [Hz]/16 [Hz] Modulating Signal
: Initial Data
88 89 MEANING OF DATA
1 1 Effective (Special Dial Tone Connection)
0 1 Ineffective
0 0 Attendant Recall
: Initial Data
90 91 MEANING OF DATA
1 1 Effective (Special Dial Tone Connection)
0 1 Ineffective
0 0 Attendant Recall
: Initial Data
97 98 MEANING OF DATA
0 0 UCD - Call WaitingNote 6(CM08-212-0)
0 1 UCD (CM08-212-1)
1 0 Call Waiting
1 1 Hunting 
						

							CHAPTER 3 ND-45669 (E)
Pag e 1 14
Revision 2.0
CM16
COMMAND CODE
TITLE:
CALL PICKUP GROUP/GROUP DIVERSION GROUP
16
MAT
1. FUNCTION:
This command is used to assign stations to a Call Pickup Group and a Group Diversion Group.
2. PRECAUTION:
(1) The maximum number of stations which can be assigned to a Call Pickup Group is 60.
(2) There is no limitation to the number of Call Pickup Groups.
(3) An individual station cannot be assigned to more than one Call Pickup Group.
(4) A maximum of 31 Group Diversion groups can be assigned.
There is no limitation to the number of stations within a Group Diversion group.
(5) This command is included in MAT mode menu “A3” (Call Pickup Group [COM01]).
(6) Group Diversion does not work for stations that are not in the Call Pickup Group.
3. ASSIGNMENT PROCEDURE:
ST + 16Y + DE + + DE + + EXESTATION NUMBER (A)
(1-4 digits)D ATA
(1-4 digits)
[CM16] Call Pickup Group/Group Diversion Group 
						

							ND-45669 (E) CHAPTER 3
Pag e 1 15
Revision 2.0
CM16
COMMAND CODE
TITLE:
CALL PICKUP GROUP/GROUP DIVERSION GROUP
16
MAT
4. DATA TABLE:
Y STATION NUMBER (A) SETTING DATA
No. MEANING DATA MEANING DATA MEANING
0 Assignment of Station 
Numbers to be included 
in a Call Pickup GroupX
XXXXStation Numbers (A) X
XXXXStation Number (B)
When assigning station numbers to a Call Pickup Group, only two station 
numbers can be assigned per operation.  Thus, by repeating the operation as 
often as required, all the station numbers to be included in a Call Pickup 
Group can be assigned.  The two station numbers to be assigned by one op-
eration are defined as Station Number (A) and Station Number (B).
For example, when defining a Call Pickup Group with Station Numbers 300, 
301, and 302, three operations are performed.
Station Number (A)
Station Number (B)
1st Operation 300 301
2nd Operation 301 302
3rd Operation 302 300
By these three operations, a chain of three lines is set up.  As seen above, 
one station can be either Station Number (A) or Station Number (B).  Thus, 
Station Number (A)/(B) is used for identifying which of the two station 
numbers is to be set first.
2
(CF-DA
SYS
STA)Assignment of Station 
Number to be included 
in Group DiversionX
XXXXStation Numbers to be 
included in Group Di-
version00
30Group Diversion Group 00
Group Diversion Group 30
(See CM19 Y = 6)
3 Display of Station Num-
bers included in a Call 
Pickup GroupBy entering a Station Number as the first data, the station numbers included 
in the Group are displayed by depressing the 
 key.
OPERATION
DISPLAY
1st STN A +   STN A: STN B
2nd +  STN B: STN C
3rd +   STN C: END
~~
~~~
DE
DE
DE
DE