NEC Neax2000 Ivs Command Manual

							CHAPTER 3 ND-45669 (E)
Page 126 Addendum-002
Revision 2.2 JANUARY, 1999
CM1B
COMMAND CODE
TITLE:
ISDN TERMINAL MULTIPOINTS STATION NUMBER ASSIGNMENT
1B
4 . D ATA  TA B L E :
1. FUNCTION:
This command is used for an ISDN Terminal Multipoints Station Number.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
1ST  DATA 2ND DATA
RELATED
COMMAND
DATA MEANING DATA MEANING
XXXXX
ISDN Multipoints No. (0-7)
ISDN Circuit Station No.
X
XXXXISDN Terminal
Multipoints Station No.
X : 0-9, A(*), B(#)CMAC YY = 01
ISDN
MULTIPOINTS No.ISDN CIRCUIT
STATION No.
(0-7)+ ,
DE+EXE DATA
(1-4 digits) +DEDE
+1B++++
,
~
[CM1B] ISDN Terminal Multipoints Station Number Assignment 
						

							ND-45669 (E) CHAPTER 3
Pag e 1 27
Revision 2.0
CM1C
COMMAND CODE
TITLE:
PS STATION NUMBER ASSIGNMENT
1C
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the PS Station Numbers for providing the Wireless Communication 
System.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
1 ST  DATA 2ND DATA
RELATED 
COMMAND
DATA MEANING DATA MEANING
XXXX VIRTUAL PS No.
(0001 – 0255)X
XXXXPS Station No.
X : 0-9, A(*), B(#)CM1D
PS STATION No.
(1-4 digits) ST   + 1C +   DE   + VIRTUAL PS No.
(4 digits)+ DE +  + EXE
~
[CM1C] PS Station Number Assignment 
						

							CHAPTER 3 ND-45669 (E)
Page 128 Addendum-001
Revision 2.1 AUGUST, 1998
CM1D
COMMAND CODE
TITLE:
PS-ID ASSIGNMENT/PS OPERATION DATA DOWNLOAD
1D
4 . D ATA  TA B L E :
1. FUNCTION:
This command is used to assign the PS-ID and to download the PS Operation data.
2. PRECAUTION:
(1) When a PS is set up initially, set the PS in Data Download Mode by applying power to the PS while
pressing the SEND key, and then execute the CM1DYY=20 in Calling Area No. 00.
(2) It takes 10 seconds to load the PS operation data to the PS.
(3) The following items display on the MAT.
STATUS
DISPLAY
Loading succeeded OK
PS is busy WAIT BUSY NOW
PS is out of area WD ERROR
Lack of PS data DATA ERROR
3. ASSIGNMENT PROCEDURE:
YY
PS STATION No.SETTING DATA
RELATED 
COMMAND
No. MEANING DATA MEANING
01 Assignment of Subline PS 
numberto each Primary PS 
stationX-XXXX
(Primary PS
Station No.)X-XXXX Subline PS Station No.
15 Terminal kind of PS
Note:Set this data also
to Subline PS station
number, if provided.
X – XXXX00
15D
term PS II
Former Dterm PS
20 PS Operation
Data Download1 Execute CM1C
21 Assignment of 
PS-IDXX...XX PS-ID
(Max. 9 digits, Decimal)
SETTING DATA
(1-8 digits) ST   + 1DYYPS STATION No.
(1-4 digits)+ DE +  + EXE DE + + 
[CM1D] PS-ID Assignment/PS Operation Data Download 
						

							ND-45669 (E) CHAPTER 3
Addendum-001 Page 129
AUGUST, 1998 Revision 2.1
CM20
COMMAND CODE
TITLE:
NUMBERING PLAN
20
MAT
1. FUNCTION:
Trunk routes and features are assigned access codes. Required developments (Route Advance, Tenant,
Kind of Calling Terminal and Closed Number data) and trunk routes or features are assigned access
codes with CM22, CM23, CM24 and CM26. The following figure shows the relationship between com-
mands: 
2. PRECAUTION:
(1) This command is included in MAT mode menu “E7” (Numbering Plan [COM03]).
(2) If “7XX” (XX=20-83) is displayed when reading out the assigned data for the access code, the
access code which was entered is the leading digit(s) of another access code consisting of more dig-
its. Add a digit to the entered access code and try again (to determine the other access code). Then
decide which one to use or delete/change (not enough digits entered).
(3) If “WRONG” is displayed when reading out the assigned data for the access code, another access
code already exists with the same leading digits. Delete the last digit and try again (to determine the
other access code). Then decide which one to use or delete/change (too many digits entered.)
Numbering Plan Group
For each 
Tenant
(4 groups) CM29
CM20
CM26
CM23
CM24
CM25
CM22 For each access code
Sta. No. 
Access Code for Feature 
Trunk Route
Closed Number Block
Trunk Route
(32 blocks)
(24 blocks)Tenant Block 
For each Tenant 
Access Code for Feature 
Trunk Route
Terminal Block 
For each ordinary Sta. 
Trunk Route
(20 blocks)
(16 blocks)Special Terminal BlockTrunk Route
For eack ordinary Sta. or data Sta. Numbering Plan
Route Advance Block
Trunk 
Route
Route 
Advance 
Block (32 
blocks)
[CM20] Numbering Plan 
						

							CHAPTER 3 ND-45669 (E)
Page 130 Addendum-002
Revision 2.2 JANUARY, 1999
CM20
COMMAND CODE
TITLE:
NUMBERING PLAN
20
MAT
4 . D ATA  TA B L E :
3. ASSIGNMENT PROCEDURE:
Y
ACCESS CODERELATED
COMMANDREMARKS
No. MEANING
0
1
2
3Numbering Plan Group 0
Numbering Plan Group 1
Numbering Plan Group 2
Numbering Plan Group 3X
XXXX: 0 - 9, A (*), B (#) CM29
ASSIGNMENT DATA
REMARKSRELATED
COMMAND
DATA MEANING
000
(OQS)Trunk Queueing-Outgoing (Set) CM15 YY = 02
CM35 YY = 28
001
(OQC)Trunk Queueing-Outgoing (Cancel)
002
(CBS)Call Back (Set) CM15 YY = 03
003
(CBC)Call Back (Cancel)
004
(OQCBS)Trunk Queueing-Outgoing/Call Back (Set) When Trunk Queuing-
Outgoing and Call Back 
share the same access code.CM15 YY = 02, 03
CM35 YY = 28
005
(OQCBC)Trunk Queueing-Outgoing/Call Back (Cancel)
006
(EROW)Executive Override CM15 YY = 05-09
007
(TCMP)Camp-on by Station (Transfer method) CM15 YY = 16
ST+20Y+DE+ +DE+ +EXEACCESS CODE
(1-3 digits)DATA
(3 digits)
~
[CM##] Title - After typing title, apply default character tag and then TOC paragraph tag. 
						

							ND-45669 (E) CHAPTER 3
Pag e 1 31
Revision 2.0
CM20
COMMAND CODE TITLE:
[CM20] Numbering Plan
NUMBERING PLAN 20
MAT
008
(PRKS)Call Park-System (Set) For Single Line Station/
Multiline Terminal/
ATTCONCM15 YY = 96
009
(PRKR)Call Park-System (Retrieve)
010
(FDAE)Call Forwarding-All Calls (Entry) CM15 YY = 00, 26
011
(FDAC)Call Forwarding-All Calls (Cancel)
012
(FDNBE)Call Forwarding-No Answer/Busy Line (Entry) When there is No Answer 
and the Busy Line shares 
the same access code.  For 
the different access code, 
set data for 014 – 017.CM15 
YY = 10, 11, 28, 45
013
(FDNBC)Call Forwarding-No Answer/Busy Line 
(Cancel)
014
(FDBE)Call Forwarding-Busy Line (Entry) CM15 YY = 11
015
(FDBC)Call Forwarding-Busy Line (Cancel)
016
(FDNE)Call Forwarding-No Answer (Entry) CM15 YY = 10
017
(FDNC)Call Forwarding-No Answer (Cancel)
018
(FDDE)Call Forwarding-Destination (Entry) CM15 YY = 15
019
(FDDC)Call Forwarding-Destination (Cancel)
020
(PICK)Call Pickup-Group CM16
021
(DPICK)Call Pickup-Direct CM15 YY = 14
022
(DNDS)Do Not Disturb (Set) From station CM15 YY = 19
023
(DNDC)Do Not Disturb/Return Message (Cancel) 
Schedule DisplayASSIGNMENT DATA
REMARKSRELATED
COMMAND
DATA MEANING 
						

							CHAPTER 3  ND-45669  (E)
C M 20
MAT
024 
						

							ND-45669 (E) CHAPTER 3
Pag e 1 33
Revision 2.0
CM20
COMMAND CODE TITLE:
[CM20] Numbering Plan
NUMBERING PLAN 20
MAT
047
(TASA)TAS Answer A CM15 YY = 53
CM53
048
(TASB)TAS Answer B
049
(TASC)TAS Answer C
050
(TASD)TAS Answer D
051
(TASE)TAS Answer E
058 Trunk Hold Code
059 Trunk Answer Code
062
(PRKT)Call Park-Tenant (Set/Retrieve) For single line station/
Multiline Terminal 
064
(SPD)Station Speed Dialing (Origination) CM73, 74
CM15 YY = 07
065
(SPDE)Station Speed Dialing (Entry)
066
(SPDC)Station Speed Dialing (Cancel)
067
(SY300)System Speed Dialing (Origination) For 300 memories 
Maximum of 26 digitsCM71, 72
CM15 YY = 06
068
(SY2/1)System Speed Dialing (Origination) For 1000 memories (1000-
Slot Memory Block No. 2) 
Maximum of 26 digitsCM08–176 = 0
CM08–252 = 0
CM74
For 1000 memories (1000-
Slot Memory Block No. 2)
Maximum of 16 digitsCM08–176 = 0
CM08–252 = 1
CM74
069
(LAST)Last Number Redial CM08–177, 178ASSIGNMENT DATA
REMARKSRELATED
COMMAND
DATA MEANING 
						

							CHAPTER 3 ND-45669 (E)
Pag e 1 34
Revision 2.0
CM20
COMMAND CODE
TITLE:
NUMBERING PLAN
20
MAT
070
(PAG0)Paging Answer Zone 0 CM30 YY = 28
CM44
CM15 YY = 08
071
(PAG1)Paging Answer Zone 1
072
(PAG2)Paging Answer Zone 2
073
(PAG3)Paging Answer Zone 3
074
(PAG4)Paging Answer Zone 4
075
(PAG5)Paging Answer Zone 5
076
(PAG6)Paging Answer Zone 6
077
(PAG7)Paging Answer Zone 7
078
(PAG8)Paging Answer Zone 8
079
(PAG9)Paging Answer Zone 9
080
(PGC)Cancel of Speaker/Radio Paging
(Delay Operation)
081
(TKSL)Individual Trunk Access CM30 YY = 19
CM08-139
CM15 YY = 55
084 OAI Terminal Mode Facility (MSF)
085
(ACC)Account Code CM15 YY = 30
CM42-10
086
(AC)Authorization Code CM08-216
CM15 YY = 31
CM42-11
087
(FACC)Forced Account Code CM08-216
CM15 YY = 31
CM42-12, CM2A ASSIGNMENT DATA
REMARKSRELATED
COMMAND
DATA MEANING 
						

							ND-45669 (E) CHAPTER 3
Pag e 1 35
Revision 2.0
CM20
COMMAND CODE TITLE:
[CM20] Numbering Plan
NUMBERING PLAN 20
MAT
088
(PRI0)Priority Call  0 These calls are routed to the 
operator at the ATTCONCM90
CM15 YY = 17, 18
CM08-250, 251
089
(PRI1)Priority Call 1
090
(SPA0)Special Operator Call 0 CM90
091
(SPA1)Special Operator Call 1
092
(SPA2)Special Operator Call 2
093
(SPA3)Special Operator Call 3
094
(EMGC)Emergency Call
095
(IATT)Individual Attendant Access/Attendant 
Inter Position Calling/TransferCM06/CM10-E00X
CM90
097 Direct Data Entry CM90/CMD001-252,
253/CMD016-XX24
800
(OPRC)Operator  Call These calls are routed to the 
operator at the ATTCONCM90
801
(1STA)1 digit-Station
802
(2STA)2 digits-Station
803
(3STA)3 digits-Station
804
(4STA)4 digits-Station
805
(5STA)5 digits-Station This data should be
assigned for 1st 2 – 3 digits 
of 5 digits station. ASSIGNMENT DATA
REMARKSRELATED
COMMAND
DATA MEANING