Home > NEC > Communications System > NEC Neax2000 Ivs Command Manual

NEC Neax2000 Ivs Command Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax2000 Ivs Command Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 473
    Add page 341 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Pag e 3 04
Revision 2.0
CM97
COMMAND CODE
TITLE:
DSS CONSOLE KEY ASSIGNMENT
97
MAT
1. FUNCTION:
This command assigns the station numbers and trunk numbers to the keys on each DSS Console.
2. PRECAUTION:
This command is included in MAT mode menu “E3” (DSS Console No. & Keys [COM02]).
[CM97] DSS Console Key Assignment
    Add page 342 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Pag e 3 05
Revision 2.0
CM97
COMMAND CODE
TITLE:
DSS CONSOLE KEY ASSIGNMENT
97
MAT
3. ASSIGNMENT PROCEDURE:
 + 97 +   +   +   +   +   +   + 
STDE
DSS CONSOLE
NUMBER
(2 digits),DSS KEY
NUMBER
(2 digits)DEDATA
(1-5 digits)EXE
0001030405060207
0809111213141015
1617192021221823
2425272829302631
3233353637383439
4041434445464247
485051525349
545657585955
NEC
DSS Console Key Numbers (EDW-48-2)
    Add page 343 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Pag e 3 06
Revision 2.0
CM97
COMMAND CODE
TITLE:
DSS CONSOLE KEY ASSIGNMENT
97
MAT
000504030201
545958575655
485352515049
424746454443
364140393837
303534333231
242928272625
182322212019
121716151413
061110090807
DSS Console Key Numbers (DCU-60-1)
    Add page 344 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Pag e 3 07
Revision 2.0
CM97
COMMAND CODE
TITLE:
DSS CONSOLE KEY ASSIGNMENT
97
MAT
4. DATA TABLE:
DSS 
CONSOLE 
NUMBERDSS KEY 
NUMBERSETTING DATA
RELATED
COMMAND
DATA MEANING
00
31
(See CM10, 
E100-E131)00
59X
XXXXStation Number CM10
CM11
DXXX Trunk Number
(XXX = 000-255)CM10
CM30
YY = 02, 03,19
F13XX XX
00: Day/Night Mode change by Tenant 00
63: Day/Night Mode change by Tenant 63CM08-244
CM08-245
56 F1052 Feature change key
57
59F0043 Night key (NIGHT) CM08-244, 245
CM15 YY = 60
F1048 Room Cut-off-Set/Reset
(RC OF)
F1049 Message Waiting-Set/Reset
(MSG W)
F1051 Check-In/Out (CK-IN)
F1053 Do Not Disturb-Set/Reset
(DND)
X
XXXXData Station Number CM1A
F1054 No Answer Indication for Wake Up Call
F1055 Function Button used for busy out display from 
ACD/UCD GroupCM08-265
~~~
~~
~
~
    Add page 345 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Pag e 3 08
Revision 2.0
CM98
COMMAND CODE
TITLE:
ADD-ON MODULE NUMBER
98
MAT
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the Add-On Module to the Primary Extension Number of a Multiline
Terminal.
2. PRECAUTION:
(1) One Add-On Module Number can be assigned for each Primary Extension Number of a Multiline
Terminal.
(2) The Add-On Module Number and Primary Extension Number must be in a PIM (or PIMs) con-
trolled by the same FP.
(3) This command should be performed before the data assignment of CM90.
(4) This command is included in MAT mode menu “E8” (Add On Module Keys [COM02]).
3. ASSIGNMENT PROCEDURE:
Y ADD-ON MODULE NUMBER PRIMARY EXTENSION NUMBER
00
31
(See CM10, EC0–EC31)X
XXXX
STDEDEEXE
++98Y + + + +ADD-ON MODULEPRIMARY
NUMBER NUMBER
(00-31)EXTENSION
(1-4 digits)
~
~
[CM98] Add-On Module Number
    Add page 346 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Pag e 3 09
Revision 2.0
CM9A
COMMAND CODE
TITLE:
MULTILINE TERMINAL SOFT KEY ASSIGNMENT
9A
1. FUNCTION:
This command assigns functions for the Soft Keys on a Multiline Terminal.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
 + 9AYY +   +   +   +   + 
STDESTATUS NUMBER
+
SOFT KEYS NUMBER
(4 digits)DEDATA
(1-6 digits)EXE
[CM9A] Multiline Terminal Soft Key Assignment
    Add page 347 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Page 310 Addendum-002
Revision 2.2 JANUARY, 1999
CM9A
COMMAND CODE
TITLE:
MULTILINE TERMINAL SOFT KEY ASSIGNMENT
9A
4. DATA TABLE:
Y Y 1S T DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
00
03Setting of 
Function for 
each Pattern 
Number (Pat-
tern Number 
0~3)aabb F5002
XXXXXScroll key to 
change the Soft key 
indication 
Setting of each 
function (Same as 
F0XXX, F1XXX, 
F50XX of CM90)
Also see following 
example.
10
13Setting of 
Characters 
Indicated for 
each Pattern 
Number (Pat-
tern Number 
0~3)X-XXXXXX Setting of Charac-
ters indicated
(Max. 6 characters)
Refer to Figure 2-1.
~
Soft Key Number (00~15)
00~03: Indicated on 1st display
04~07: Indicated on 2nd display
08~11: Indicated on 3rd display
12~15: Indicated on 4th display
Status Number (00~15)
00: Idle State
01: During dialing 
(Holding no call)
02: During dialing 
(Holding a station/trunk)
03: During calling 
(Holding no call)
04: During calling 
(Holding a station/trunk)
05: Being called
06: When called party is busy 
(Holding no call)
07: When called party is busy 
(Holding a station/trunk)
08: When called party sets DND
09: Trunk Busy
10: During Speaking
(Holding no call)
11: During Speaking 
(Holding a station/trunk)
12: During live recording/after live re-
cording to NEAX Mail AD-8
13-15: Not used aa
 bb
~
    Add page 348 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Addendum-002 Page 311
JANUARY, 1999 Revision 2.2
CM9A
COMMAND CODE
TITLE:
MULTILINE TERMINAL SOFT KEY ASSIGNMENT
9A
• Example of CM9A Data Assignment
1ST DATA of 
YY=03STATUSKEY 
No.2ND DATA of 
YY=03MEANINGINDICATION 
(YY=13)
0000 Idle 00 F1017 MIC ON/OFF MIC
0100 During dialing 
(Holding no call)00 F1001 Save & Repeat S & R
0101 01 F0021 Call Pickup 
DirectPICK
0103 03 F5002 Scroll key >>>>
0104 04 F0012 Call Forwarding-All Calls 
Set/CancelFDA
0105 05 F0014 Call Forwarding-No An-
swer/Busy Line Set/CancelFDN
0106 06 F0022 Do Not Disturb Set/Cancel DND
0107 07 F5002 Scroll key >>>>
0111 11 F5002 Scroll key >>>>
0300 During calling
(Holding no call)00 F1002 Voice Call VOICE
0301 01 F1001 Save & Repeat S & R
0302 02 F1005 Message Reminder MW
0303 03 F0004 Call Back Set CB
0400 During calling
(Holding station/trunk)00 F1002 Voice Call VOICE
0401 01 F1001 Save & Repeat S & R
0402 02 F1005 Message Reminder MW
0403 03 F5001 Transfer to VMS VMTRF
0500 Being Called 00 F5003 Ringer Tone Changing R-TONE
0600 When called party is busy 
(Holding no call)00 F0004 Call Back Set CB
0601 01 F0A25 Call Waiting Set CW
0603 03 F1005 Message Reminder MW
0700 When called party is busy 
(Holding station/trunk)00 F1005 Message Reminder MW
0701 01 F5001 Transfer to VMS VMTRF
0900 Trunk busy 00 F0004 Outgoing Queuing OG-Q
1000 During speaking
(Holding no call)00 F1017 MIC ON/OFF MIC
1001 01 F0046 Call Hold C HLD
1100 During speaking
(Holding station/trunk)00 F1017 MIC ON/OFF MIC
    Add page 349 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Page 311-1 Addendum-002
Revision 2.2 JANUARY, 1999
CM9A
COMMAND CODE
TITLE:
MULTILINE TERMINAL SOFT KEY ASSIGNMENT
9A
• Example of CM9A Data Assignment (Continued)
Note 1:When the 2nd data of CM12 YY=23 is set to “3”, the above default Soft Key pattern No. 3 is assigned.
Note 2:Pattern No. 3 is fixed. If Pattern No. 3 is changed, the only way to reset to default is to clear all data
in the PBX and load the Resident System Program.
Note 3:Help key is only available in Pattern No. 3.
1ST DATA of 
YY=03STATUSKEY 
No.2ND DATA of 
YY=03MEANINGINDICATION 
(YY=13)
1200 During live recording/af-
ter live recording to 
NEAX Mail AD-800 F1096 Address Addrs
1201 01 F1092 Pause Pause
1202 02 F1094 End End
1203 03 F5002 Scroll key >>>>
1204 04 F1093 Re-record ReRec
1205 05 F1095 Erase Erase
1206 06 F1017 MIC ON/OFF MIC
1207 07 F5002 Scroll key >>>>
1208 08 F1097 Urgent Page Urgnt
1209 09 NONE
1210 10 NONE
1211 11 F5002 Scroll key >>>>
    Add page 350 to Favourites
    image text
    Enable zoom 
    							THIS PAGE INTENTIONALLY LEFT BLANK.
ND-45669 (E) CHAPTER 3
Addendum-002 Page 311-2
JANUARY, 1999 Revision 2.2
This page is for your notes.
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax2000 Ivs Command Manual