Home > NEC > Communications System > NEC Neax2000 Ivs Command Manual

NEC Neax2000 Ivs Command Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax2000 Ivs Command Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 473
    Add page 371 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Pag e 3 28
Revision 2.0
CMB0
COMMAND CODE
TITLE:
PEG COUNT
B0
MAT
1. FUNCTION:
This command allows accumulated data of use for maintenance purposes to be read from the system
PEG counter. Data can be cleared after reading.
2. PRECAUTION:
(1) When the system is reset, the contents in the memories of the PEG counter are all cleared.
(2) This command is included in MAT mode menu “D1” (Peg Count [COM03]).
3. ASSIGNMENT PROCEDURE:
Y=0
• To clear individual data
• To clear all PEG COUNT data
• To display 
Y=2
• To set the PEG COUNT measurement start/end time
• To display the PEG COUNT measurement Status
ST + B00 + DE +TRUNK STATUS DATA
(3 digits)+ DE +  CCC + EXE
ST + B00 + DE + 999 + DE + CCC + EXE
ST + B00 + DE +TRUNK STATUS DATA
(3 digits)+ DE
ST + B02 + DE +1st DATA
(0/1)+ DE + + EXE 2nd DATA
(8 digits)
ST + B02 + DE + 2 + DE
[CMB0] Peg Count
    Add page 372 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Pag e 3 29
Revision 2.0
CMB0
COMMAND CODE
TITLE:
PEG COUNT
B0
MAT
4. DATA TABLE:
YTRUNK STATUS DATA
ASSIGNMENT
DATA
DATA M EAN ING
0 000
063
(OG Call)The number of Outgoing seizures-trunk route 00 – 63 CCC
(For 0 CLEAR)
064
(Tandem 
Conn.)The number of tandem connections established
065
(STA busy)The number of times a busy station was encountered
066
(ATT Call)The number of all types of calls to the ATTCON(s)
068
(DT sending)The number of connections giving Dial Tone
069
(STA to STA)The number of station to station connections established
070
(SND all busy)The number of failures caused by all senders being busy
071
(Data to Data)The number of internal data station to data station call attempts
072
(ORT all busy)The number of failures caused by all registers being busy
076
(RGT all busy)The number of failures caused by all ringing trunks being busy
100
163
(IC Call)The number of incoming call seizures-trunk route 00–63
200
263
(TRK all busy)The number of times all trunks found to be busy - trunk route 0–63
999 Enter to clear all PEG data
~
~
~
    Add page 373 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Pag e 3 30
Revision 2.0
CMB0
COMMAND CODE
TITLE:
PEG COUNT
B0
MAT
0 500
563
(ICBT Conn.)The number of incoming calls terminated to busy tone-Trunk 
Route 00–63CCC
(For 0 CLEAR)
600
663
(IC no answer)The number of unanswered incoming calls-Trunk Route 00–63
700
763
(ORT Conn.)The number of register connections on trunk call-Trunk 
Route 00–63
830
(Used busy)The number of conference calls (Three/Four way Calling)
831
(CFT busy)The number of failures cased by all conference trunks 
(For three way calling) being busy.
832
(IC & CF-DA)The number of transferred incoming calls to an ATTCON or a pre-
determined station, by Call Forwarding-No Answer.  YTRUNK STATUS DATA
ASSIGNMENT
DATA
DATA M EAN ING
~
~
~
    Add page 374 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Pag e 3 31
Revision 2.0
CMB0
COMMAND CODE
TITLE:
PEG COUNT
B0
MAT
4. DATA TABLE:
Y1ST DATA SETTING DATA
DATA MEANING DATA MEANING
2
Setting of 
duration for 
measuring PEG 
COUNT0
(Measurement 
Start Time)Setting of PEG COUNT 
Start TimeXXXXXXXX
To stop the PEG 
COUNT immediate-
ly, enter 99999999XX
 XX XX XX
Min.
(00-59)
Hour
(00-23)
Day
(01-31)
Month
(01-12) 1
(Measurement 
End Time)Setting of PEG COUNT 
End Time
2
(Status)For displaying the PEG 
COUNT Status
Note
Note:The meaning of the data displayed is as shown below:
0:  Not Started
1:  Under measuring
2:  Finished
After turning power on or after a system reset, the system starts the PEG COUNT, if the PEG COUNT start
time has not been set.
    Add page 375 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Pag e 3 32
Revision 2.0
CMB1
COMMAND CODE
TITLE:
TRAFFIC MEASUREMENT
B1
4. DATA TABLE:
1. FUNCTION:
This command is used to measure traffic data of outgoing/incoming trunk calls and to display the data on
CAT or MAT.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
0 Setting condition
of traffic measurement0 Traffic Measure-
ment Mode0
1
2Not to measurement
Hourly measurement
Daily measurement
1 Setting Start Time 
for Traffic Measure-
mentXXXXXXXX XX
 XX XX XX
Month
(01~12)
Day
(01~31)
Hour
(00~23)
Minute
(00~59)
2 Setting End Time 
for Traffic Measure-
mentXXXXXXXX XX
 XX XX XX
Month
(01~12)
Day
(01~31)
Hour
(00~23)
Minute
(00~59)
1ST DATA 2ND DATA ++ ++ +ST
B1YDEDEEXE
+
[CMB1] Traffic Measurement
    Add page 376 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Pag e 3 33
Revision 2.0
CMB1
COMMAND CODE
TITLE:
TRAFFIC MEASUREMENT
B1
0 Setting condition
of traffic measurement3 Display data for 
Traffic Measure-
ment0
1
2Before the traffic measure-
ment 
During the traffic measure-
ment
Completed the traffic mea-
surement
1 Displaying incoming 
trunk traffic data000
127Trunk No. 000
Trunk No. 1271
7XXXX
(4 digits)Incoming 
trunk traffic 
data
2 Displaying outgoing 
trunk traffic data000
127Trunk No. 000
Trunk No. 1271
7XXXX
(4 digits)Outgoing 
trunk traffic 
data
3 Displaying incoming 
trunk route traffic data00
63Trunk Route No. 00
Trunk Route No. 631
7XXXXXX
(6 digits)Incoming 
trunk route 
traffic data
4 Displaying outgoing 
trunk route traffic data00
63Trunk Route No. 00
Trunk Route No. 631
7XXXXXX
(6 digits)Outgoing 
trunk route 
traffic data
: Initial Data
~ ~ ~
~ ~ ~
~ ~ ~
~ ~ ~
    Add page 377 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Pag e 3 34
Revision 2.0
CMB3
COMMAND CODE
TITLE:
UCD PEG COUNT
B3
MAT
1. FUNCTION:
This command allows accumulated traffic data related to the UCD Group to be read from the system.
2. PRECAUTION:
This command is included in MAT mode menu “D1” (Peg Count [COM03]).
3. ASSIGNMENT PROCEDURE:
• To display
• To clear individual data
• To clear all UCD PEG COUNT data
ST  +  B3Y  +  DE  +DATA
(1 - 4 digits)+  DE
ST  +  B3Y  +  DE  +  TRUNK STATUS DATA  +  DE  +  CCC  +  EXE
ST  +  B39  +  DE  +  999  +  DE  +  CCC  +  EXE
[CMB3] UCD Peg Count
    Add page 378 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Pag e 3 35
Revision 2.0
CMB3
COMMAND CODE
TITLE:
UCD PEG COUNT
B3
MAT
4. DATA TABLE:
Y SETTING DATA
TRUNK STATUS 
DATAMEANING DATA MEANING
0
(ANS)The number of answered calls on the UCD 
stationX
XXXXUCD Station Number (CM17 Y=0)
1
(IC Call)The number of incoming calls to the UCD 
Group00
15UCD Group 00
UCD Group 15
2
(Wait)The number of call waiting calls for a pre-
determined time in queuing mode on the 
UCD Group
Note:The predetermined time is speci-
fied by CM41 Y=0 Function No.
16.
3
(Wait & RLS)The number of abandoned calls to the UCD 
Group
4
(All Busy)The number of incoming calls to the all 
Busy of the UCD Group
5
(Answer)The number of incoming calls to the UCD 
Group that were answered
6 The number of times the number of queu-
ing assigned by CM42-16 was reached
9
(Clear)Clear all UCD PEG COUNT data 999
~
~CM17 Y=2~
    Add page 379 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3  ND-45669  (E)
C M D5
4.  DAT A TABL E:
1.  FUN CTIO N:
 X X
2nd
00 : N o Ch ec k  C ode
S T   +   D5Y   +   D E  +
~
    Add page 380 to Favourites
    image text
    Enable zoom 
    							ND-45669  (E)   CHAPTER 3
CM D5
Note  1 : Acco rd ing to  the d igi ts  t o b e d esig nat ed , a ssign 01 FF  to  t h e 1 st Data 0 a nd 1  re spe ctiv ely . Di gits
3   ID  Cod e E nt ry   X
~
x1 x2 x3 x4 x6 x7 x8
0/ 1: Not to b e tot alled /T o be t ota ll e d
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax2000 Ivs Command Manual