Home > NEC > Communications System > NEC Neax2000 Ivs Command Manual

NEC Neax2000 Ivs Command Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax2000 Ivs Command Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 473
    Add page 231 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3  ND-45669  (E)
C M 42
4.  DATA  T A BLE :
KIN D OF  SY STE M  COU NTER
~
~
~
~
~
~
~
~
~
    Add page 232 to Favourites
    image text
    Enable zoom 
    							ND -4 5669 ( E)  CHAPTER 3
CM 42
Note 1 :No “Lo ckou t A la rm  Di sp lay”  fu nctio n if thi s da ta  is  no t a ssign ed.
K IND  O F SYS TEM COUN TER
~
~
~
~
~
    Add page 233 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Page 199-1 Addendum-001
Revision 2.1 AUGUST, 1998
CM42
COMMAND CODE TITLE:
SYSTEM COUNTER DATA/PAD DATA/TRUNK RESTRICTION CLASS
CONVERSION 42
4.2 PAD Data (Programmable)
PAD DATA PATTERNS
CONNECTING PATTERNS
(A – B)
CM35 YY=19
2ND DATA=0CM35 YY=19
2ND DATA=1CM35 YY=19
2ND DATA=2CM35 YY=19
2ND DATA=3
50
6550 54 58 62 STA – COT/ODT
51 55 59 63 TONE – COT/ODT
52 56 60 64 COT – COT/ODT
53 57 61 65 ODT/DTI – COT/ODT
50 54 58 62 STA/TONE – DTI
51 55 59 63 COT – DTI
52 56 60 64 ODT – DTI
53 57 61 65 DTI – DTI
PAT T E R N
1ST DATA
~
    Add page 234 to Favourites
    image text
    Enable zoom 
    							THIS PAGE INTENTIONALLY LEFT BLANK.
ND-45669 (E) CHAPTER 3
Addendum-001 Page 199-2
AUGUST, 1998 Revision 2.1
This page is for your notes.
    Add page 235 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Page 200 Addendum-002
Revision 2.2 JANUARY, 1999
CM42
COMMAND CODE TITLE:
SYSTEM COUNTER DATA/PAD DATA/TRUNK RESTRICTION CLASS
CONVERSION 42
T/R: Transmit/Receive
+: Gain
-: Loss
PAD DATA OF B TRUNK (T/R) [dB]
REMARKS
ODT
(4W E&M)ODT
(2W E&M)COT/DID DTI
00
1500 0/0 0/0 0/0 0/0
01 0/0 0/0 0/0 -2/-2
02 0/0 0/0 0/0 -3/-3
03 -2/-2 -3/-3 -3/-3 0/-6
04 -3/-3 0/0 0/0 -3/-8
05 -12/-11 -6/-6 -6/-6 +3/-3
06 -16/-11 0/0 0/+5 -6/-6
07 -6/-6 0/0 +3/+3 -8/-8
08
15Not UsedPATTERNS
2ND DATA
~
~
    Add page 236 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Pag e 2 01
Revision 2.0
CM42
COMMAND CODE TITLE:
SYSTEM COUNTER DATA/PAD DATA/TRUNK RESTRICTION CLASS
CONVERSION 42
4.3 Trunk Restriction Class Conversion (PBX ICS)
1 ST  DATA 2 ND DATA
REMARKS
DATA MEANING DATA MEANING
20 NEAX2000 IVS Trunk Rest.
Class 1 (RCA)00
15NEAX2400 IMS Trunk Rest.
Class (0 - 15)
21 NEAX2000 IVS Trunk Rest.
Class 2 (RCB)
22 NEAX2000 IVS Trunk Rest.
Class 3 (RCC)
23 NEAX2000 IVS Trunk Rest.
Class 4 (RCD)
24 NEAX2000 IVS Trunk Rest.
Class 5 (RCE)
25 NEAX2000 IVS Trunk Rest.
Class 6 (RCF)
26 NEAX2000 IVS Trunk Rest.
Class 7 (RCG)
27 NEAX2000 IVS Trunk Rest.
Class 8 (RCH)
30 NEAX2400 Trunk Rest. Class 0 01
08NEAX2000 IVS Trunk Rest.
Class (1 - 8)
31 NEAX2400 Trunk Rest. Class 1
32 NEAX2400 Trunk Rest. Class 2
33 NEAX2400 Trunk Rest. Class 3
34 NEAX2400 Trunk Rest. Class 4
35 NEAX2400 Trunk Rest. Class 5
36 NEAX2400 Trunk Rest. Class 6
37 NEAX2400 Trunk Rest. Class 7
38 NEAX2400 Trunk Rest. Class 8
39 NEAX2400 Trunk Rest. Class 9
40 NEAX2400 Trunk Rest. Class 10
41 NEAX2400 Trunk Rest. Class 11
42 NEAX2400 Trunk Rest. Class 12
43 NEAX2400 Trunk Rest. Class 13
44 NEAX2400 Trunk Rest. Class 14
45 NEAX2400 Trunk Rest. Class 15
~
NEAX2000 IVS
NEAX2400 IMS
~
NEAX2400 IMS
NEAX2000 IVS
    Add page 237 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Pag e 2 02
Revision 2.0
CM42
COMMAND CODE TITLE:
SYSTEM COUNTER DATA/PAD DATA/TRUNK RESTRICTION CLASS
CONVERSION 42
Note 1:Initial Data in the Data Table represents the value for the data “NONE”. In this case, the fol-
lowing conversion is performed in the Deluxe Traveling Class Mark-CCIS.
(1) NEAX2400 to NEAX2000 IVS
(2) NEAX2000 IVS to NEAX2400
Note 2:This command should be used when changing the initial setting shown above, or when receiving
the NEAX2400 Trunk Restriction Class (9 – 15) as a Deluxe Traveling Class Mark.
NEAX2400
TRK REST. CLASSNEAX2000 IVS
TRK REST. CLASS
0: OG via ATT
1: Unrestricted-1
2: Unrestricted-2
3: Non-Restricted
4: Semi-Restricted
5: Restricted
6: Fully-Restricted
7: 
8: 
 
15:1: Unrestricted (RCA)
1: Unrestricted (RCA)
2: Non-Restricted-1 (RCB)
3: Non-Restricted-2 (RCC)
4: Semi-Restricted-1 (RCD)
5: Semi-Restricted-2 (RCE)
6: Restricted-1 (RCF)
7: Restricted-2 (RCG)
8:
8:
NEAX2000 IVS
TRK REST. CLASSNEAX2400
TRK REST. CLASS
1: Unrestricted (RCA)
2: Non-Restricted-1 (RCB)
3: Non-Restricted-2 (RCC)
4: Semi-Restricted-1 (RCD)
5: Semi-Restricted-2 (RCE)
6: Restricted-1 (RCF)
7: Restricted-2 (RCG)
8: Fully-Restricted (RCH)1: Unrestricted-1
2: Unrestricted-2
3: Non-Restricted
4: Semi-Restricted
5: Restricted
6: Fully-Restricted
7:
8: Not Defined
~Fully-Restricted (RCH)~
Not Defined
    Add page 238 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Addendum-002 Page 203
JANUARY, 1999 Revision 2.2
CM44
COMMAND CODE
TITLE:
EXTERNAL EQUIPMENT STARTING CONDITIONS
44
4. DATA TABLE:
1. FUNCTION:
This command assigns the relay (circuit number of the PN-DK00) used for controlling external equip-
ment.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
CIRCUIT NUMBER
RELATED
COMMANDREMARKS
NUMBER MEANING
XXX XX
X
 Circuit Number
(0-3)
Card Number
(00-31)CM10
Card number E8XX
CIRCUIT
ST + 44 + DE + NUMBER + DE + + + EXE
(3 digits)D ATA  1
(2 digits)D ATA  2
(2 digits)
[CM44] External Equipment Starting Conditions
    Add page 239 to Favourites
    image text
    Enable zoom 
    							CHAPTER 3 ND-45669 (E)
Pag e 2 04
Revision 2.0
CM44
COMMAND CODE
TITLE:
EXTERNAL EQUIPMENT STARTING CONDITIONS
44
DATA 1 DATA 2
RELATED
COMMAND
DATA MEANING DATA MEANING
00 External Hold Tone Machine Start
(TNT/COT Interface)00
09External Hold Tone for Music On 
HoldCM10
(DA00-DA09)
CM48
01 External Announcement Machine Start
(COT Interface)00 External Announcement Machine 
for wake-up callingCM10
CM48
02 Speaker Paging Machine Start 00
09Speaker Paging Zone 0
Speaker Paging Zone 9CM30 YY = 28
11 Indication for Trunk All Busy 01
62Trunk Group 01
Trunk Group 62CM30 YY = 09
13 TAS Indication 00
63TAS Group 00
TAS Group 63CM30 YY = 17
14 Indication for ACD/UCD call waiting 00
15UCD Group 00
UCD Group 15CM17
CM59
15 Relay Control Function Key 00 Relay Control (ON/OFF) via 
Multiline TerminalCM90 YY = 00,
F7XXX
30 External Alarm driver function for the 
SMDR buffer overflow01 Activates when buffer overflows 
(when CMD001-80/100/120 is set 
to “4”.)CMD001-80/100/120
02 Activates when buffer overflows 
(when CMD001-80/100/120 is set 
to “5”.)
35 No. 7 CCIS Link Alarm Display XX CM06 YY = 07
36 No. 7 CCIS Day/Night Status Display 
when the day/night mode change is 
performed by the main office01 Tenant No.
Note:An intraoffice attendant
console should not be
assigned for the tenant.
~
~~
~~
~~
~~
XX
CCH No. (00 - 03)
    Add page 240 to Favourites
    image text
    Enable zoom 
    							ND-45669 (E) CHAPTER 3
Addendum-001 Page 205
AUGUST, 1998 Revision 2.1
CM45
COMMAND CODE
TITLE:
PURPOSE OF PBR/CFT
45
1. FUNCTION:
This command is used to define the presence and purpose of PB (DTMF) Receivers (PN-8RST) and
conference trunks. This command is also used to make CFTs and PBRs busy.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
PBR/CFT
ST + 45Y + DE + NUMBER + DE + + EXE
(2-3 digits)DATA
(1 digit)
[CM45] Purpose of PBR/CFT
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax2000 Ivs Command Manual