NEC Neax2000 Ivs Command Manual
Have a look at the manual NEC Neax2000 Ivs Command Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CHAPTER 3 ND-45669 (E) Pag e 2 84 Revision 2.0 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT 4. DATA TABLE: 4.1 Multiline Terminal : Initial Data YY SETTING DATA RELATED COMMAND No. MEANING DATA MEANING 00 (Key Data)Setting of Functions X XXXXStation Number • Primary Extension Number (FX-FXXXX) • Multiline Number (ordinary station) • Multiline Number (assigned by CM11) X=0-9, A(*), B(#)CM10 CM11 A000 A031 A100 A131Automatic Intercom Number CM11 CM12 YY = 03 CM56 YY = 10 A200 A700 A201 A701 A224 A724Manual Intercom Number CM11 CM12 YY = 03 CM56 YY = 11 B000 B900 B001 B901 B024 B924Dial Intercom Number CM11 CM12 YY = 03 CM56 YY = 12 ~ ~ ~ ~ ~ ~ ~ ~ ~
ND-45669 (E) CHAPTER 3 Pag e 2 85 Revision 2.0 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT 00 (Key Data)Setting of Functions AA01 AA05 AA11 AA15 AA71 AA75Loop Line Number for Multiline Terminal Attendant Position AAX XXCM11 CM15 YY = 71 CM12 YY = 03 AB00 AB99ICI/OPR Line Number for Multiline Terminal Attendant Position NumberCM11 CM15 YY = 71 CM12 YY = 03 CX CXXXXVirtual-Line Station No. for Off-Hook Voice AnnouncementCM11 DXXX Trunk (XXX = 000 - 255) CM10 CM30 YY = 02, 03, 18 F0XXX XXX 004: OG Queuing/Call Back (OQ/CB) 006: Executive Override (EROW) 010: Call Forwarding - All Calls Set/ Cancel (FDA) 012: Call Forwarding - No Answer/Busy Line Set/Cancel (FDB/N) 014: Call Forwarding - Busy Line Set/ Cancel (FDB) 016: Call Forwarding - No Answer Set/ Cancel (FDN) 018: Call Forwarding - Destination Set (FDDS) 019: Call Forwarding - Destination Cancel (FDDC)CM15 YY = 02, 03, 25 CM15 YY = 05 CM15 YY = 00, 26 CM15 YY = 10, 11, 28 CM15 YY = 11, 28 CM15 YY = 10 CM15 YY = 15 : Initial Data YY SETTING DATA RELATED COMMAND No. MEANING DATA MEANING ~ ~ ~ Loop Line No. (1-5) Multiline Terminal Attendant Position No. (0-7) ~ ~
CHAPTER 3 ND-45669 (E) Pag e 2 86 Revision 2.0 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT 00 (Key Data)Setting of Functions F0XXX XXX 020: Call Pickup-Group (PICK) 021: Call Pickup-Direct (DPICK) 022: Do Not Disturb (DND) 024: Automatic Wake Up/ Timed Reminder (WU) 027: Wake-Up Call set from predeter- mined Station (Single Wake-Up time operation) (SWU) 028: Wake-Up Call set from predeter- mined station (Multiple Wake-Up time Operation) (MWU) 033: MonitorNote 040: Message Waiting Lamp Set (MWS) 041: Message Waiting Lamp Reset (MWR) 043: Day Night Mode Change by Station Dialing (D/N) 044: ACD/UCD Busy out (UCDB) 046: Call Hold (CHLD) 047: TAS Answer A (TASA) 048: TAS Answer B (TASB) 049: TAS Answer C (TASC) 050: TAS Answer D (TASD) 051: TAS Answer E (TASE) 058: (HOLD) for Trunk Line Appearance 059: Trunk AnswerCM16 CM15 YY=14 CM15 YY=19 CM15 YY=13 CM15 YY=20 CM15 YY=21 CM08-259 CM15 YYY=103, 104 CM15 YY=24 CM08-244, 245 CM15 YY=60 CM17 CM15 YY=01 CM53 Note:Monitoring telephone conversations may be illegal under certain circumstances and laws. Consult a legal advisor before implementing the monitoring of telephone conversations. Some federal and state laws re- quire a party monitoring a telephone conversation to use beeptone(s), to notify all parties to the telephone conversation, and/or to obtain consent from all parties to the telephone conversation. Some of these laws provide strict penalties for illegal monitoring of telephone conversations. : Initial Data YY SETTING DATA RELATED COMMAND No. MEANING DATA MEANING HOLD
ND-45669 (E) CHAPTER 3 Addendum-002 Page 287 JANUARY, 1999 Revision 2.2 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT : Initial Data YY SETTING DATA RELATED COMMAND No. MEANING DATA MEANING 00 (Key Data)Setting of Functions F0XXX XXX 067: System Speed Dialing (300 memory) 068: System Speed Dialing (1000 memory) 069: Last Number Redial-(LAST) 085: Account Code (ACC) 097: Direct Data Entry 100: Trunk Route 00 163: Trunk Route 63 200: Route Advance 00 231: Route Advance 31 300: Operator Call [OPR] A26: LCR Group 0 A27: LCR Group 1 A28: LCR Group 2 A80: Split Call Forwarding-All Calls Set/ Cancel A82: Split Call Forwarding-Busy Line/ No Answer Set/Cancel A85: Six Party Conference A86: Ten Party Conference A88: Whisper Page A94: Number Sharing Set/Cancel B00: Simultaneous Paging Group 0 B07: Simultaneous Paging Group 7 B10: Re-participation Group 0 B17: Re-participation Group 7 B20: Simultaneous Paging Group 0 for 2Way Calling B27: Simultaneous Paging Group 7 for 2Way CallingCM08-177, 178 CM15 YY=30 CM15 YYY=119 CM56 CM15 YYY=119 CM56 F1XXX XXX 000: Stack Dial 001: Save & Repeat (1) (S&R1) 002: Voice Call (VOICE) 004: Hooking 005: Message Waiting Lamp/Message Reminder (MW/MR)CM13 YY=03 CM15 YY=47 ~ ~ ~ ~ ~ LNR/SPD TRF(TRF)
CHAPTER 3 ND-45669 (E) Page 288 Addendum-001 Revision 2.1 AUGUST, 1998 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT 00 (Key Data)Setting of Functions F1XXX XXX 007: DTMF Additional Dial (Programmable) (PBPRG) 008: DTMF Additional Dial (Fixed Width) (PBIX) 009: Hooking Signal sent to outside (SHF) 010: (HOLD) 011: 012: (CNF) 013: Save & Repeat (2) (S&R2) 014: Save & Repeat (3) (S&R3) 015: (RECAL) 016: (SPKR) 017: (MIC) Use as a one-touch mute key. 018: -3dB pad on/off (internal calls only) 020: Release key (RLS) 032: OAI Function Key 0 047: OAI Function Key 15 064: Do not Disturb (HDND) 065: Room Cut Off (HRC) 066: Message Waiting (HMW) 067: Wake Up (HWU) 068: Check-In (CK-IN) 069: Room Status (RSTS) 070: Call Record (REC) 071: Print Out (PRINT) 072: Group (GROUP) 073: Details (DETAL) 074: Set (SET) 075: Reset (RESET) 076: Cancel (CNL) 077: Release (HRLS) 080: Do Not Disturb Override (DNDOV)CM41 Function No. 14 CM35 YY=26 CM35 YY=16 CM15 YY= 01, 64 CM15 YY=07 For UCD Station CM17 CMD7 Y=0 For Hotel Console CM15 YY=62 : Initial Data YY SETTING DATA RELATED COMMAND No. MEANING DATA MEANING HOLD FNC CNF RECALL SPKR MIC ~~
ND-45669 (E) CHAPTER 3 Addendum-001 Page 289 AUGUST, 1998 Revision 2.1 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT 00 (Key Data)Setting of Functions F1XXX 085: Voice Message Waiting Service- Individual Set when called station is no answer or busy 090: Headset/Handset Note:Used to switch to headset or back to handset. 091: Record 092: Paude 093: Re-record 094: End 095: Erase 096: Address 097: Urgent page 098: Voice Mail key 099: Calling Number/Calling Name Display for Caller ID ClassCM15 YYY=100, 102 For ADA-J, ADA-W, & D term E F11XX XX 01: Station Speed Dialing 00 (SPD00) 99: Station Speed Dialing 99 (SPD99)CM73 CM74 CM15 YY = 07 F12XX XX 01: Trunk Group 01 Busy Lamp (TGB01) 62: Trunk Group 62 Busy Lamp (TGB62) 70: Internal Zone Paging Group 0 (PG0) 77: Internal Zone Paging Group7 (PG7) 78: All Zone Internal Paging 80: ACD/UCD Group 0 Busy Lamp (UCD00) 95: ACD/UCD Group15 Busy Lamp (UCD15)CM30 YY=09 CM56 CM15 YY = 49 CM08-158 CM56 YY = 00-05 CM15 YY = 49 CM17 Y = 2 F13XX XX 00: Day/Night Mode change by Tenant 00 63: Day/Night Mode change by Tenant 63CM08-244 CM08-245 : Initial Data YY SETTING DATA RELATED COMMAND No. MEANING DATA MEANING ~~ ~~ ~~ ~~ ~~
CHAPTER 3 ND-45669 (E) Page 290 Addendum-001 Revision 2.1 AUGUST, 1998 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT 00 (Key Data)Setting of Functions F20XX XX 00: DATA (DATA) 01: AUTO/DISP (A/D) 02: DTX (DTX) 03: DISP (DISP) 04: AUTO (AUTO) 05: DATA DND (D DND)CM1A CMA1 YY = 01 CMA1 YY = 01 F3XXX Call Park-Tenant CM08-133 F40XX XX 00: TAS Answer on Tenant 00 (ANS00) 01: TAS Answer on Tenant 01 (ANS01) 63: TAS Answer on Tenant 63 (ANS63) NoteCM30 YY=00, 02, 03 CM12 YY=04 F41XX XX 00: Pooled Line Number 00-Tenant 00/ Trunk Route 00 (POL00) 63: Pooled Line Number 63-Tenant 63/ Trunk Route 63 (POL63)CM30 YY=00, 01, 02, 03 F5000 Call Park-System (CPSY) CM15 YY=96 F5001 Transfer to VMS F5010 Caller ID Display Key F5011 Call Redirect for transfering to a station CM51 YY=22 F5012 Call Redirect for transfering to a VMS CM51 YY=18 F5013 Mute Key Note:By pressing key, either the incoming call on a , , or TAS (designated tenant) can be answered. If the Automatic Hold Function (answering while talking with anoth- er party) is required for the key, assign CM15 YY=72 to 0. : Initial Data YY SETTING DATA RELATED COMMAND No. MEANING DATA MEANING XX Group Number (00 - 63) Serial Key Number (1 - 8) X(CP001 - CP638) ANS ~~ ~~ ANSTRUNKSUBLINEMYLINE ANS
ND-45669 (E) CHAPTER 3 Pag e 2 91 Revision 2.0 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT 00 (Key Data)Setting of Functions F6010 F6017Call Termination from FX Line 0 (FX0) Call Termination from FX Line 7 (FX7)CM35 YY=15 F6020 F6027Call Termination from WATS Line 0 (WATS0) Call Termination from WATS Line 7 (WATS7)CM35 YY=15 F6030 F6037Call Termination from CCSA Line 0 (CCSA0) Call Termination from CCSA Line 7 (CCSA7)CM35 YY=15 F7XXX CM44-XXX-1500 01 (RG)Tone Ringer enabled on call termination0 1 Disabled Enabled 03 (RG)Ringing sending method when terminating a call to Line/Trunk key on the Multiline Terminal0 1 Delayed ringing No delayed ringingCM41 Y=1 Function No. 09 05 Call Indicator Lamp Control0 1 Not available Available (The lamp lights on call termination or recall) : Initial Data YY SETTING DATA RELATED COMMAND No. MEANING DATA MEANING ~~ ~~ ~~ XX Card No. (00-31) assigned by CM44 Circuit No. (0-3) assigned by CM44 X
CHAPTER 3 ND-45669 (E) Pag e 2 92 Revision 2.0 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT 4.2 SN610 ATTCON / SN716 DESKCON • ATTCON Incoming Call Identification Key YY SETTING DATAFUNCTIONSTANDARD KEY SETTINGREMARKSRELATED COMMAND No. MEANING 00 (Key data)Setting of FunctionF6000 F6007C.O. Incoming 0 (LDN0) C.O. Incoming 7 (LDN7)LDN0 CM35 YY=15 F6010 F6017Call Termination from FX Line 0 (FX0) Call Termination from FX Line 7 (FX7)CM35 YY=15 F6020 F6027Call Termination from WATS Line 0 (WATS0) Call Termination from WATS Line 7 (WATS7)CM35 YY=15 F6030 F6037Call Termination from CCSA Line 0 (CCSA0) Call Termination from CCSA Line 7 (CCSA7)CM35 YY=15 F6040 F6047Tie Line Incoming 0 (TIE0) Tie Line Incoming 7 (TIE7)CM35 YY=15 F6050 F6053Special Operator Call 0 (SPA0) Special Operator Call 3 (SPA3)CM20– 090–093 F6054 Priority Call 0 (PRI0) CM15 YY=17 CM08-250, CM20-088 F6055 Priority Call 1 (PRI1) CM15 YY=18 CM08-251 CM20-089 F6056 Emergency Call (EMGC) CM20–094 ~~ ~~ ~~ ~~ ~~ ~~
ND-45669 (E) CHAPTER 3 Pag e 2 93 Revision 2.0 CM90 COMMAND CODE TITLE: MULTILINE TERMINAL/SN610 ATTCON/ADD-ON MODULE KEY ASSIGNMENT 90 MAT Note:Do not assign ATTCON Incoming Call Identification Key data (F60XX) to key numbers 1 to 6. 00 (Key data)Setting of FunctionF6060 Operator Call (ATND) ATND F6061 Recall (RCL) RCL F6062 Serial Call Termination (SRL) CM90 – F6105 F6063 Call Forwarding-No Answer (NANS)CM51 YY = 00, 01 F6064 Call Forwarding-Busy Line (BUSY)CM51 YY = 03, 04 F6065 Call Forwarding-Intercept (ICPT)CM08-032, 119 F6066 Off-Hook Alarm (EMG) CM51 YY = 12 F6067 Attendant Interposition Call- ing/Transfer (TF)CM20 – 095 YY SETTING DATAFUNCTIONSTANDARD KEY SETTINGREMARKSRELATED COMMAND No. MEANING