NEC Neax2000 Ivs Command Manual
Have a look at the manual NEC Neax2000 Ivs Command Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 168
ND-45669 (E) CHAPTER 3
Pag e 1 41
Revision 2.0
CM20
COMMAND CODE TITLE:
[CM20] Numbering Plan
NUMBERING PLAN 20
MAT
Note:Monitoring telephone conversations may be illegal under certain circumstances and laws. Consult a legal
advisor before implementing the monitoring of telephone conversations. Some federal and state laws re-
quire a party monitoring a telephone conversation to use beeptone(s), to notify all parties to the telephone
conversation, and/or to obtain consent from all parties to the...](http://img.usermanuals.tech/thumb/54/84253/w64_nec-neax2000-ivs-command-manual_d-167.png "Page 168
ND-45669 (E) CHAPTER 3
Pag e 1 41
Revision 2.0
CM20
COMMAND CODE TITLE:
[CM20] Numbering Plan
NUMBERING PLAN 20
MAT
Note:Monitoring telephone conversations may be illegal under certain circumstances and laws. Consult a legal
advisor before implementing the monitoring of telephone conversations. Some federal and state laws re-
quire a party monitoring a telephone conversation to use beeptone(s), to notify all parties to the telephone
conversation, and/or to obtain consent from all parties to the...")
CHAPTER 3 ND-45669 (E) Pag e 1 44 Revision 2.0 CM23 COMMAND CODE TITLE: TENANT DEVELOPMENT 23 4 . DATA TA B L E : 1. FUNCTION: Trunk routes and features are assigned by developing access codes for each tenant. For tenant assign- ments requiring development of route advance and kind of calling terminal data for each trunk route assignment, each development and the corresponding trunk routes are to be assigned using CM22 and CM24. 2. PRECAUTION: None 3. ASSIGNMENT PROCEDURE: YY TENANTSETTING DATA RELATED COMMAND No. MEANING DATA MEANING 00 23Tenant Block 00 Tenant Block 2300 63Tenant 00 Tenant 63000 099 800 804 A00 A99Service Features (Refer to CM20)CM20 100 163Trunk Route 00 Trunk Route 63CM30 200 231Route Advance Block 00 Route Advance Block 31CM22 400 419Kind of Calling Terminal Block 00 Kind of Calling Terminal Block 19CM24 600 631Closed Number Block 00 Closed Number Block 31CM26 ST + 23YY + DE + + DE + + EXEDATA (3 digits) TENANT NUMBER (2 digits) ~~~~~ ~ ~ ~~~ ~~~ ~~~ ~~~ [CM23] Tenant Development
ND-45669 (E) CHAPTER 3 Pag e 1 45 Revision 2.0 CM24 COMMAND CODE TITLE: KIND OF CALLING TERMINAL DEVELOPMENT 24 4. DATA TABLE: 1. FUNCTION: For each access code assigned to a calling terminal block, a trunk route can be assigned based on which type of terminal is placing the call. For calling terminal assignments requiring development of route advance and kind of special terminal data for trunk route assignments, each of these developments and the corresponding trunk routes are assigned using CM22 and CM25. 2. PRECAUTION: None 3. ASSIGNMENT PROCEDURE: YY KIND OF CALLING TERMINALSETTING DATA RELATED COMMAND No. MEANING DATA MEANING 00 19Kind of Calling Terminal Block 00 Kind of Calling Terminal Block 190 1 2 3AT T C O N Station (DTMF) Not used Station (DP)100 163Trunk Route 00 Trunk Route 63CM30 200 231Route Advance Block 00 Route Advance Block 31CM22 500 515Kind of Special Terminal Block 00 Kind of Special Terminal Block 15CM25 ST + 24YY + DE + + DE + + EXEKIND OF CALLING TERMINAL (1 digit)D ATA (3 digits) ~ ~ ~~~ ~~~ ~~~ [CM24] Kind of Calling Terminal Development
CHAPTER 3 ND-45669 (E) Pag e 1 46 Revision 2.0 CM25 COMMAND CODE TITLE: KIND OF SPECIAL TERMINAL DEVELOPMENT 25 4. DATA TABLE: 1. FUNCTION: For each access code assigned to a special terminal block, a trunk route can be assigned based on which type of special terminal (ordinary station or analog data station) is placing the call. For special terminal assignments requiring development of route advance data for trunk route assignment, route advance development and the corresponding trunk routes are assigned using CM22. 2. PRECAUTION: None 3. ASSIGNMENT PROCEDURE: YY KIND OF SPECIAL TERMINALSETTING DATA RELATED COMMAND No. MEANING DATA MEANING 00 15Kind of Special Terminal Block 00 Kind of Special Terminal Block 150 1Ordinary Station Analog Data Station (Fax or MODEM) (See CM13 YY=07)100 163Trunk Route 00 Trunk Route 63CM30 200 231Route Advance Block 00 Route Advance Block 31CM22 ST + 25YY + DE + + DE + + EXEKIND OF SPECIAL TERMINAL (1 digit)DATA (3 digits) ~ ~ ~~~ ~~~ [CM25] Kind of Special Terminal Development
ND-45669 (E) CHAPTER 3 Pag e 1 47 Revision 2.0 CM26 COMMAND CODE TITLE: CLOSED NUMBER DEVELOPMENT 26 MAT 1. FUNCTION: For each access code assigned to a closed number block, a trunk route is selected and the system is assigned to a) Repeat the access code as a dialed digit (to the C.O.) b) To add digits to convert the access code into other digits These assignments are completed prior to dialing the rest of the number. For closed number assignments requiring development of route advance, tenant, and kind of calling ter- minal data for trunk route assignment, each of these developments and the corresponding trunk routes are assigned using CM22, CM23 and CM24. 2. PRECAUTION: (1) For the outgoing call by the closed number, Toll Restriction is not available. Set CM 35 YY=11 to “3”. (2) This command is included in MAT mode menu “B3” (Closed number [COM01]). 3. ASSIGNMENT PROCEDURE: ST + 26Y + DE + + DE + + EXECLOSED NUMBER BLOCK No. (00-31)DATA (1-10 digits) [CM26] Closed Number Development
CHAPTER 3 ND-45669 (E) Pag e 1 48 Revision 2.0 CM26 COMMAND CODE TITLE: CLOSED NUMBER DEVELOPMENT 26 MAT 4. DATA TABLE: : Initial Data Y No.CLOSED NUMBER BLOCK No. SETTING DATA RELATED COMMAND No. MEANING DATA MEANING 0 (RT Data)00 31Closed Number Block 00 Closed Number Block 31100 163Trunk Route 00 Trunk Route 63CM30 200 231Route Advance Block 00 Route Advance Block 31CM22 300 323Tenant Block 00 Tenant Block 23CM23 400 419Kind of Calling Terminal Development 00 Kind of Calling Terminal Development 19CM23 1 (Additional Digits)00 31Closed Number Block 00 Closed Number Block 31X XX...X (10 digits)Additional digits (1–10) X=0–9, A (*), B (#), C (Fixed Pause), D (Programmable Pause) 2 (Additional kind)00 31Closed Number Block 00 Closed Number Block 311 2 3 Convert into the digits as per Y=1. Add the digits as per Y=1. Closed Number ~~~~~~ ~~~ ~~~ ~ ~~ ~~~~ ~~~
ND-45669 (E) CHAPTER 3 Pag e 1 49 Revision 2.0 CM29 COMMAND CODE TITLE: NUMBERING PLAN TENANT GROUP 29 MAT 4. DATA TABLE: 1. FUNCTION: When each tenant has its own numbering plan in a multiple-tenant system, all the tenants are divided into four groups, each consisting of tenants having identical features in their numbering plans. Numbering Plan Group data is then assigned on a tenant basis. 2. PRECAUTION: (1) If the data is not assigned (“NONE”), then Numbering Plan Group 0 is used for all tenants. (2) This command is included in MAT mode menu “E7” (Numbering Plan [COM02]). 3. ASSIGNMENT PROCEDURE: TENANT NUMBER SETTING DATARELATED COMMANDREMARKS 00 (TN No.)Tenant 00 Tenant 63710 Numbering Plan Group 0 CM20 Y = 0 711 Numbering Plan Group 1 CM20 Y = 1 712 Numbering Plan Group 2 CM20 Y = 2 713 Numbering Plan Group 3 CM20 Y = 3 ST + 29 + DE + + DE + + EXEDATA (3 digits) TENANT NUMBER (2 digits) ~~ [CM29] Numbering Plan Tenant Group
CHAPTER 3 ND-45669 (E) C M 2A 4. DAT A TABL E: 1. FUN CTIO N: ST+ 2A Y+ DE + +DE+ +EX E ~ [C M2A] ID C od e As sig nme nt w it h M P
ND-45669 (E) CHAPTER 3 CM 2A Note 1 : Au tho riz a tion Co des and F orc e d A ccoun t C ode s a re bo th av ail abl e f o r c han ging c la ss o f se rv ic e. 3 Serv ice Cla ss A /B f o r XX S erv ic e C la ss B S erv ic e C la ss A XX ~ XX S erv ic e C la ss B S erv ic e C la ss A XX
CHAPTER 3 ND-45669 (E) C M 30 MAT 1. FUN CTIO N: (00 0–255) T R UNK DEEXE ~~~ ~~~
ND -4 5669 ( E) CHAPTER 3 CM 30 MAT : In it ia l D ata