Konica Minolta bizhub 500 User Manual

							4Specifying Settings Using PageScope Web Connection
4-90 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
4.25 SNMP
Specify SNMP settings.
ItemDescription
SNMP Specify whether to use SNMP. Also, select the SNMP type to 
be used from the list of items.
SNMP v1/v2c (IP)
SNMP v3 (IP)
SNMP v1 (IPX)
UDP Port Setting Enter the UDP port number (input range: 1 to 65535).
SNMP v1/v2c Setting Enter the community name for reading and writing. (up to 15 
characters)
SNMP v3 Setting Specify each setting described below.
Context Name
Discovery User Name
Read User Name, Security Level, auth-password, priv-pass-
word
Write User Name, Security Level, auth-password, priv-pass-
word
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-91
Specifying Settings Using PageScope Web Connection
Chapter 4
4.26 SMB
WINS Setting
You can specify SMB WINS settings.
2
Note 
When performing SMB scans (host name setting) via a router, specify the 
WINS settings according to the SMB transmission settings in [SMB Set-
ting] - [Client Setting].
ItemDescription
WINS Specify whether to use WINS.
Auto Obtain Setting Specify whether to enable the automatic acquisition of WINS.
WINS  Server  Address1 Enter the WINS server address (syntax: ***.***.***.*** where the 
input range for *** is 0 to 255).
WINS Server Address2
Downloaded From ManualsPrinter.com Manuals 
						

							4Specifying Settings Using PageScope Web Connection
4-92 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
Client Setting
Specify SMB scan settings.
2
Note 
To use the SMB (NTLM) of the external server authentication, [Scan Set-
ting] or [Print Setting] must be turned ON.
2
Note 
NTLMv2 is available from Windows NT 4.0 (Service Pack 4).
ItemDescription
SMB TX Specify whether to use SMB transmission.
NTLM Setting Select the NTLM version to be used.
Select [v1/v2] or [v1] when using a computer over a network 
that is running a Windows 98 SE or Windows Me operating 
system.
Select [v1] when the Samba service is operating a server over 
a network.
User Authentication(NTLM) Specify whether to use user authentication with NTLM.
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-93
Specifying Settings Using PageScope Web Connection
Chapter 4
Print Setting
Specify SMB print settings.
ItemDescription
SMB Print Specify whether to use the SMB printing (Windows printing) 
service.
NetBIOS Name Enter the NetBIOS name (up to 15 characters).
Print Service Name Enter the print service name (up to 12 characters).
Workgroup Enter the work group name (up to 15 characters).
Downloaded From ManualsPrinter.com Manuals 
						

							4Specifying Settings Using PageScope Web Connection
4-94 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
4.27 AppleTalk
Specify AppleTalk settings.
ItemDescription
AppleTalk Specify whether to use AppleTalk.
Printer Name Enter the print name (up to 31 characters excluding = ~).
Zone Name Enter the zone name (up to 31 characters).
Current Zone Displays the current zone.
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-95
Specifying Settings Using PageScope Web Connection
Chapter 4
4.28 Bonjour Setting
You can specify the Bonjour settings.
ItemDescription
Bonjour Specify whether to use the Bonjour setting.
Bonjour Name Specify the device name that is used with Bonjour (up to 63 
characters).
Downloaded From ManualsPrinter.com Manuals 
						

							4Specifying Settings Using PageScope Web Connection
4-96 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
4.29 LDAP Setting
LDAP Setting
Specify whether to use the LDAP setting.
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-97
Specifying Settings Using PageScope Web Connection
Chapter 4
LDAP Server Registration
1On the Network tab, click [LDAP Setting].
2Click [LDAP Server Registration].
3Click   of the server to be registered.
– You can specify 5 LDAP servers.
Downloaded From ManualsPrinter.com Manuals 
						

							4Specifying Settings Using PageScope Web Connection
4-98 bizhub 500/420
Specifying Settings Using PageScope Web Connection
Chapter 4
4Specify the desired settings.
!
Detail 
The setting that must be specified vary depending on the authentication 
method. If “anonymous” is selected, settings for “Domain Name”, “Login 
Name”, and “Password” are not required.
Click the [Check Connection] button to check the connection to the 
LDAP server with the specified settings.
2
Reminder 
If the LDAP server settings are not specified correctly, network failure 
may occur. The server administrator should specify LDAP settings.
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings Using PageScope Web Connection4
bizhub 500/420 4-99
Specifying Settings Using PageScope Web Connection
Chapter 4
2
Note 
Be sure to use an authentication method like the one that is used by the 
LDAP server. For details, refer to the manual of the LDAP server being 
used.
If the authentication method is specified as “GSS-SPNEGO”, enter the 
domain name for “Active Directory”.
ItemDescription
No. Displays the LDAP server number.
LDAP Server Name Enter the LDAP server name.
Server Address Enter the LDAP server address (syntax: “***.***.***.***” or 
FQDN where the input range of *** is 0 to 255). Symbols “-” 
and “.” can be used.
Port No. Enter the port number used to communicate with the LDAP 
server (input range: 1 to 65535).
Enable SSL/Port No. (SSL) Specify whether to perform communications with the LDAP 
server using SSL/TLS.
Search Base Enter the search start point of the LDAP search (up to 255 
characters).
Timeout Enter the LDAP search timeout (input range: 5 to 300 
seconds).
Max  Search  Results Enter the maximum number of hits to be received as the LDAP 
search result (input range: 5 to 1000).
Authentication Method Set the LDAP authentication method.
Login Name Enter the login name if authentication is not set to 
“anonymous” (up to 255 characters).
Password Enter the password if authentication is not set to 
“anonymous” (up to 128 characters).
Domain Name Enter the domain name if authentication is set to “GSS-
SPNEGO” (up to 64 characters).
Select Server Authentication 
MethodSelect the LDAP server authentication method.
Use Referral Specify whether to use the referral setting. When referral is 
used, the search base that was specified in LDAP Sever Set-
ting searches the top and bottom levels as the starting point.
Initial Setting for Search Details Specify the conditions to perform LDAP detailed searches. 
Select OR, AND, Begins With, or Ends With for Name, E-Mail, 
Fax Number, Last Name, First Name, City, Company Name, 
and Department.
Downloaded From ManualsPrinter.com Manuals