Konica Minolta bizhub 500 User Manual

							3Specifying Settings From the Control Panel
3-56 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
5Specify the desired settings.
6Touch [Fwd.→].
Pserver Setting screen 3/5 appears.
7Specify the desired settings.
8Touch [Fwd.→].
Pserver Setting screen 4/5 appears.
9Specify the desired settings.
10Touch [Fwd.→].
Nprinter/Rprinter Setting screen 5/5 appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings From the Control Panel3
bizhub 500/420 3-57
Specifying Settings From the Control Panel
Chapter 3
11Specify the desired settings.
12Touch [OK].
The NetWare settings are applied.
2
Note 
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display 
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode 
by touching [Close] in each screen until the screen for the Copy, Fax, 
Scan or Box mode appears.
Downloaded From ManualsPrinter.com Manuals 
						

							3Specifying Settings From the Control Panel
3-58 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
Status
The NetWare status can be verified.
1In NetWare Setting screen 2/5, touch [Status].
The NetWare Status screen appears.
2Touch [ ] or [ ] to select the server to verify.
3Verify the NetWare status.
4Touch [Close].
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings From the Control Panel3
bizhub 500/420 3-59
Specifying Settings From the Control Panel
Chapter 3
3.14 http Server Settings
You can specify the http server settings, PageScope Web Connection set-
tings, and the IPP settings used by the printer of this machine.
IPP and http Parameters
The IPP parameters are as follows:
http Server Setting screen 1/4
http Server Setting screen 2/4
http Server Setting screen 3/4
http Server Setting screen 4/4
ItemDescription
http  Server  Setting Select whether to use the http server setting. If “OFF” is se-
lected, the PageScope Web Connection and IPP print func-
t i o n  c a n n o t  b e  u s e d  s i n c e  t h e  h t t p  s e r v e r  p o r t  ( 8 0 )  i s  c l o s e d .
PSWC Setting Select whether to use PageScope Web Connection.
ItemDescription
IPP Setting Specify whether to enable the IPP print function.
Accept IPP job Set whether to accept IPP jobs.
Support Operation Sets the operation support information. For details on 
specifying the settings, refer to “Support Operation” on 
page 3-62.
Printer Information Sets the printer information. For details on specifying the 
settings, refer to “Printer Information” on page 3-63.
ItemDescription
IPP Authentication Select whether to perform IPP authentication.
Authentication System Select the authentication method when performing IPP au-
thentication.
ItemDescription
User  Name When performing IPP authentication, use the keyboard that 
appears in the touch panel to type in each required item.
Password
realm
Downloaded From ManualsPrinter.com Manuals 
						

							3Specifying Settings From the Control Panel
3-60 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
To specify IPP and http settings
1In the Administrator Setting screen, touch [5 Network Setting]. (Refer to 
page 3-8 for more details.)
2In the Network Setting screen, touch [4 http Server Setting].
The http Server Setting screen appears.
3Specify the desired settings.
4Touch [Fwd.→].
http Server Setting screen 2/4 appears.
5Specify each item.
6Touch [Fwd.→].
http Server Setting screen 3/4 appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings From the Control Panel3
bizhub 500/420 3-61
Specifying Settings From the Control Panel
Chapter 3
7Specify each item.
8Touch [Fwd.→].
http Server Setting screen 4/4 appears.
9Specify the desired settings.
10Touch [OK].
The IPP settings are applied.
2
Note 
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display 
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode 
by touching [Close] in each screen until the screen for the Copy, Fax, 
Scan or Box mode appears.
Downloaded From ManualsPrinter.com Manuals 
						

							3Specifying Settings From the Control Panel
3-62 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
Support Operation
Specify whether each function is supported in IPP communication.
[OFF]: Responds as not supported.
[ON]: Responds to communication. No response is returned for “Cancel 
Job”, “Open Job”, and “Open Job Attributes”.
1On the IPP Setting screen, touch [Support Operation].
The Support Operation screen appears.
2Touch [ON] or [OFF] for each item.
3Touch [OK].
The operation support information is set.
2
Note 
To cancel changes to the setting, touch [Cancel].
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings From the Control Panel3
bizhub 500/420 3-63
Specifying Settings From the Control Panel
Chapter 3
Printer Information
The printer information can be specified.
1In the IPP Setting screen, touch [Printer Information].
Printer Information screen 1/2 appears.
2Touch [Printer Name].
The Printer Name screen appears.
3Type in the printer name (up to 127 characters).
4Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The printer name is set, and the Printer Information screen appears 
again.
5Touch [Printer Location].
The Printer Location screen appears.
Downloaded From ManualsPrinter.com Manuals 
						

							3Specifying Settings From the Control Panel
3-64 bizhub 500/420
Specifying Settings From the Control Panel
Chapter 3
6Type in the printer location (up to 127 characters).
7Touch [OK].
– To cancel changes to the setting, touch [Cancel].
The printer location is set, the Printer Information screen appears 
again.
8Touch [Fwd.→].
Printer Information screen 2/2 appears.
9Touch [Printer Information].
The Printer Information screen appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Specifying Settings From the Control Panel3
bizhub 500/420 3-65
Specifying Settings From the Control Panel
Chapter 3
10Type in the printer information (up to 127 characters).
– To cancel changes to the setting, touch [Cancel].
11Touch [OK].
The printer information is set, the Printer Information screen appears 
again.
12In Printer Information screen 2/2, touch [Print URI].
The Print URI screen appears.
13Check the print URIs.
14Touch [Close].
The Printer Information screen appears again.
15Touch [Close].
!
Detail 
For the procedure to enter characters, refer to “Entering text” on 
page 6-5.
Downloaded From ManualsPrinter.com Manuals