GTE Omni Scbs Installation And Maintenance Manual
Have a look at the manual GTE Omni Scbs Installation And Maintenance Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 3 GTE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CATEGOF?Y CIVIC TABLE FUNCTION LCR OFFICE CODE ROUTE 420 SELECTlON LCR AREA AND AREA/ 421 OFFICE CODE ROUTE SELECTION LCR OFFICE CODE 422 ASSIGNMENT LCR AREA CODE ASSIGNMENT 423 LCR AREA/OFFICE CODE 424 ASSIGNMENT LCR CARRIER ACCESS: 425 CODE ASSIGNMENT DEFINES OFFICE CODE ROUTE SEQUENCE DEFINES AREA CODE ROUTE SEQUENCE DEFINES OFFICE CODE TABLE DEFINES AREA CODE TABLE DEFINES AREA/OFFICE CODE TABLE DEFINES SCC ACCESS CODE TABLE 2.186
Laboratory Activity - Least Cost Routing Programming GE OMNJ SBCS PERFORM THE FOLLOWING PROGRAMMING TASKS IN THE SEQUENCE OUTLINED BELOW USING THE SAMPLE WORK ORDERS AND IN ACCORDANCE WITH THE GTE OMNI SBCS GTEP MANUAL. COMPLETE THE REVIEW EXERCISE QUESTIONS PERTAINING TO LEAST COST ROUTING PROGRAMMING UPON COMPLETION OF THIS LABORATORY ACTIVITY. WORK ORDER #2.10 ZOMPANY NAME: NU SYSTEM CO. -0CATION: RESTON, VIRGINIA 3RIGINATOR: TELECOMMUNICATIONS MANAGER TASKS: PHONE #: (703) 555-1212 WORK ORDER #2.10 (TASK #l) l Build LCR Office code route tables with CMC-420. ‘ARAMETERS: (1) Establish office code route table numbers for following trunk group numbers including designated selection sequence and digit composing flag: Office Code Selection Sequence=1 TGN=19 Flag=3 Route Table 1 Selection Sequence=2 TGN=32 Flag=3 Selection Sequence=3 TGN=31 Flag=3 Off ice Code Selection Sequence=1 TGN=32 Flag=3 Route Table 2 Selection Sequence=2 TGN=33 Flag=3 Selection Sequence=3 TGN=31 Flag=3 Selection Sequence=4 TGN=19 Flag=3 INSTRUCTIONS: (1) Perform programming changes for Least Cost Routing. (2) Check/test the operation of changes after completion of this portion of the laboratory activity. (3) Proceed to next work order task. 2.187
WORK ORDER #2.10 COMPANY NAME: NU SYSTEM CO. PHONE #: (703) 555-1212 LOCATION: RESTON, VIRGINIA WORK ORDER #2.10 (TASK #2) ORIGINATOR: TELECOMMUNICATIONS MANAGER TASKS: e Assign office codes to route tables with CMC-422. (1) Assign the following office codes to the designated office code route table: Office Code Route Office Codes = 490,491, and Table 1 494 (2) Check/test the operation of changes after Office Code Route Office Codes = 256,353,426, Table 2 670,753,643, and 670 (3) Proceed to next work order task. 2.188
Laboratory Activity - Least cost Routing Programming (Continued) GUE OMNU SEES WORK ORDER #2.10 COMPANY NAME: NU SYSTEM CO. LOCATION: RESTON, VIRGINIA %lGINATOR: TELECOMMUNICATIONS MANAGER TASKS: PHONE #: (703) 5551212 WORK ORDER #2.10 (TASK #3) l Build LCR area code route tables with CMC-421. PARAMETERS: (1) Establish area code route numbers for following trunk group numbers including designated selection sequence and digit composing flag: Area Code Selection Sequence=1 TGN=33 Flag=10 Route Table 1 Selection Sequence=2 TGN=32 Flag=10 Selection Sequence=3 TGN=19 Flag=1 0 Area Code Selection Sequence=1 TGN=25 Flag=10 Route Table 2 Selection Sequence=2 TGN=29 Flag=10 Selection Sequence=3 TGN=34 Flag=10 Selection Sequence=4 TGN=33 Flag=10 Selection Sequence=5 TGN=19 Flag=10 INSTRUCTIONS: (1) Perform programming changes for Least Cost Routing. (2) Check/test the operation of changes after completion of this portion of the laboratory activity. (3) Proceed to next work order task. Area Code Route Table 3 Selection Sequence=1 TGN=19 Flag=10 2.189
WORK ORDER #2.10 COMPANY NAME: NU SYSTEM CO. -0CATION: RESTON, VfRGlNlA 3RIGINATOR: TELECOMMUNICATIONS MANAGER TASKS: PHONE #: (703) 555-1212 WORK ORDER #2.10 (TASK #4) 0 Assign exceptions to area/office code route tables with CMC-423. (1) Assign following area code exceptions to (1) Perform programming changes for Least Cost designated area code route table numbers. Area Code Route Table 1 Area Code Route Table 2 Area Codes = 301,302,304, and 804. Area Codes = 609,212,718,215, 415, and 213. (2) Check/test the operation of changes after completion of this portion of the laboratory (3) Proceed to next work order task. 2.190
Laboratory Activity - Least Cost Routing Programming (Continued) GTE OMNU sms WORK ORDER #2.10 COMPANY NAME: NU SYSTEM CO. LOCATION: RESTON, VIRGINIA ORIGINATOR: TELECOMMUNICATIONS MANAGER TASKS: PHONE #: (703) 555-1212 WORK ORDER ff2.10 (TASK #5) l Assign combined office/area code route tables with CMC-424. (1) Assign the following office/area codes to the (1) Perform programming changes for Least Cost designated area/office code table: Area/Office Code Route Table 1 Area Code = 703 Office Codes = 771,777, and 327 (2) Check/test the operation of changes after completion of this portion of the laboratory t LAB MILESTONE: e VERIFY THAT ALL PROGRAMMING CHANGES REQUESTED IN WORK ORDERS HAVE BEEN PERFORMED CORRECTLY. e ASK INSTRUCTOR TO INSPECT LEAST COST ROUTING PROGRAMMING CHANGES AND INITIAL YOUR PERFORMANCE CHECKLIST. e MAKE CERTAIN QUESTIONS l-10 OF REVIEW EXERCISE 2.10 HAVE BEEN COMPLETED BEFORE SUBMITTING THE REVIEW EXERCISE TO THE INSTRUCTOR FOR GRADING.
INSTRUCTIONS: THE FOLLOWING EXERCISE CONSISTS OF MULTIPLE CHOICE, TRUE/FALSE, FILL IN THE BLANK, OR MATCHING TYPE QUESTIONS. ALL AVAILABLE RESOURCES (I.E., STUDENT WORKBOOK, NOTES, AND GTEP MANUAL) MAY BE USED AS REFERENCES. SUBMIT EXERCISE TO INSTRUCTOR FOR GRADING WHEN LAST QUESTION HAS BEEN COMPLETED. 1. 2. 3. 4. 5. 6. 7. LEAST COST ROUTING STORES AND SELECTS TRUNK ROUTE BASED ON: A) AVAILABILITY B) LCR ROUTE TABLE C) CALLING STATION’S COS D) ALL OF THE ABOVE E) NONE OF THE ABOVE LCR PROVIDES AREA CODE OR COMBINED AREA/OFFICE CODE ROUTE TABLES AND OFFICE CODE ROUTE TABLES. A MAXIMUM OF TRUNK GROUP ALTERNATIVES MAY BE ASSIGNED TO EACH LCR ROUTE. (TRUE OR FALSE) TOLL AND MULTI-DIGIT RESTRICTION DO NOT APPLY TOi,LCR CALLS. BEFORE ASSIGNING LCR OFFICE OR AREA CODES, LCR MUST BE BUILT WITH CMC-420 AND 421. WHAT PARAMETER WOULD YOU USE TO ASSIGN THE APPROPRIATE DIGIT COMPOSING FLAG WHEN BUILDING AN OFFICE OR AREA ROUTE TABLE WITH CMC-420 AND 421? OFFICE AND AREA CODES MAY BE ASSIGNED TO WITH CMC-422 AND CMC-423. 2.192
Review Exercise - Least Cost Routing (2.10) (Continued) GE OMNU sL3m 8. WHAT CMC COMMANDS, PARAMETERS, AND SETTINGS WOULD BE REQUlRED TO ESTABLISH AREA CODE ROUTE TABLE NUMBER 1 FOR A CO TRUNK USING AREA CODES 614,317, and 201? 9. WHICH COS LEVELS WOULD ALLOW ACCESS TO ALL ROUTES IN THE LCR TABLES? 10. MATCH EACH OF THE FOLLOWING CMC COMMANDS WITH ITS CORRECT DESCRIPTION: CMC-420 CMC-421 CMC-422 CMC-423 CMC-424 CMC-425 A. LCR AREA CODE ASSIGNMENT B. -LCR OFFICE CODE ASSIGNMENT C. LCR AREA AND AREA/OFFICE CODE ROUTE SELECTION ASSIGNMENT D. LCR CARRIER ACCESS CODE ASSIGNMENT E. LCR AREA/OFFICE CODE ASSIGNMENT F. LCR OFFICE CODE ROUTE SELECTION ASSIGNMENT 2.193
2.11 Enabling Object GIVEN: . GTE OMNI SBCS . GTE OMNI SBCS PERIPHERALS . PORTABLE MAINTENANCE PANEL @ GTE OMNI SBS COURSE AND SITE DOCUMENTATION PACKAGE 0 LABORATORY ACTIVITY - SPECIAL SYSTEM CONFIGURATION PROGRAMMING @ REVIEW EXERCISE ACTION: . USE OMNI SBCS PROGRAMMING TOOLS AND EQUIPMENT TO: - MODIFY SYSTEM PARAMETERS TO ACCOMMODATE FRONT-END ARRANGEMENT WHERE OMNI SBCS FUNCTIONS BEHIND A PABX. - ASSIGN TENANT SERVICE CONFIGURATION. - ESTABLISH AN OFF-PREMISE EXTENSION. - MODIFY SYSTEM TANDEM TRUNK SWITCHING FOR NETWORK APPLICATIONS. e COMPLETE REVIEW EXERCISE. CRITERIA: @ DEMONSTRATION OF ABOVE TASKS IN ACCORDANCE WITH PROCEDURES OUTLINED IN OMNI SBCS GTEP MANUAL AND OMNl SBCS STUDENT WORKBOOK @ REVIEW EXERCISE WILL BE COMPLETED CORRECTLY IN ACCORDANCE WITH PASS/FAIL CRITERIA OF THIS TRAINING ORGANIZATION. 2.195