Home > NEC > Communications System > NEC Neax 2400 Imx Feature Programming Manual

NEC Neax 2400 Imx Feature Programming Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Neax 2400 Imx Feature Programming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1042
    Add page 1041 to Favourites
    image text
    Enable zoom 
    							NEAX2400 IMX Feature Programming Manual
ND-70184 (E), Issue 3
Page 997
Voice Call - CCIS V-7
V-7  Voice Call - CCIS
General Description
This service feature allows Inter-office VOICE CALL when the calling Dterm/Single-line Station and the called
Dterm belong to different PBX’s in the CCIS network.
Operating Procedure
From a Dterm to a Dterm:
1. Dterm (a) places a call to Dterm (b) through a CCIS line; receives ringback tone. Dterm (b) rings.
2. D
term (b) still does not answer. Dterm (a), then presses the VOICE key and sends a tone to Dterm (b). The
LCD on Dterm (a) displays:
Note:
If Dterm (a) turns on MIC key on the Dterm, Dterm (a) can talk with Dterm (b) hands-free.
3. Dterm (a) talks with Dterm (b) via the speaker.
Note:
If Dterm (b) turns on MIC key on the Dterm, Dterm (b) can talk with Dterm (a) hands-free.
From a single-line station to a D
term:
1. Station (a) places a call to Dterm (b) through a CCIS line and receives ringback tone while Dterm (b) is
ringing.
 NE
CNEC
 Dterm (a)Dterm (b)
[Node B]
[Node A]CCIS RBT
RGRBT
called Dterm
VOICE
XXXX
NECNEC
 Dterm (a)Dterm (b)
[Node B] [Node A]CCISSpeakerVoice
NEC
STN (a)
Dterm (b)
[Node B]
[Node A]CCISRBT
RBT
RG
    Add page 1042 to Favourites
    image text
    Enable zoom 
    							NEAX2400 IMX Feature Programming Manual
Page 998ND-70184 (E), Issue 3
V-7 Voice Call - CCIS
Operating Procedure (cont’d)
2. Station (a) switch hook flashes and receives special dial tone. Dterm (b) still does not answer.
3. Station (a) dial the Access Code of VOICE CALL service and sends out a signal tone to D
term (b) via the
speaker. Dterm (b) talks with Station (a) via the speaker.
Service Conditions
1. Once a VOICE CALL is executed, the message “VOICE on multi-line set” is displayed on the called
station.
2. Call Forwarding-All Calls/-Busy Line/-Don’t Answer can be serviced by VOICE CALL.
3. VOICE CALL will terminate at the station whose My-line equals the extension called.
Programming
Setting by VOICE button:
STEP 1:AKYD - Assign data to Feature key. FKY= 14 
STEP 2:ADSL - Assign SN=2 (Originating; RBT Connection) and FKY=14 (Voice Call; VOICE).
This command is used for assigning the function to each soft key.
STEP 3:ASFC - With respect to SFC of the stations that set Voice Call, cancel the restriction of SFI= 52. 
(SFI= 52: Voice Call service)
(SFI= 93: Voice Call Restrict) 
Setting by SHF + Access Code (Individual Station):
STEP 1:ASYD - System 1, Index 17, bit 0: (1) 
SHF + ACC Code during RBT.
STEP 2:ANPD - Assign minimum necessary number of digits for the first number of the Access Code of Voice
Call. 
STEP 3:ASPA - Assigns Access Code of Voice Call. 
CI= H (Hooking), SIDA= 41, SRV= SSCA (Service Code Appendix)
NEC
STN (a)
Dterm (b)
[Node B]
[Node A]CCISSPDT
SPDT
RG
NEC
STN (a)
Dterm (b)
[Node B]
[Node A]Voice
    All NEC manuals Comments (0)

    Related Manuals for NEC Neax 2400 Imx Feature Programming Manual