Lucent Technologies Audix Administration And Data Acquisition Guide

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-45 delrsub 
13
Errors 
If either the name or extension doesn’t b elong to a valid  voic e mail system remote 
sub sc rib er, an error messag e d isp lays. If more rec ord s exist, sub sc rib er d eletion 
c ontinues. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows:
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
REMOTE SUBSCRIBER DELETE ROUTINE 
(
< ADAP version name>)
name = _________; extension/text address = _______;
____: DELETED SUB_________
Example 
The following c ommand d eletes one remote sub sc rib er in the sub sc rib er 
database. 
delrsub -i Mary 74199,76199
 
Jones, James,76199 
The following data ap p ears on the sc reen: 
REMOTE SUBSCRIBER DELETE ROUTINE ()
Jones, James,76199
name = Jones, James; extension/text address = 76199;
1:  DELETED SUB 76199 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1  name C 29 r1v3+ D-r1.0+ I-r2.0+
2 extension/text ad d ress C 64 r1v3+ D-r1.0+ I-r2.0+
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-46 delsub 
13
delsub
Delete subscrib er 
Syntax 
delsub
 [-r release] [-v
] [-w
] [-V
] [-i
] [< ifile] [> ofile] 
Description 
This c ommand  d eletes sub sc rib ers from the c urrent d atab ase of the voic e mail 
system. Use the name and  extension as inp ut for eac h sub sc rib er. Command  
statistic s are written to stand ard  outp ut. 
-r
Release flag ; must b e followed b y 
release. 
releaseDeletes d ata for the sp ec ified  release of the INTUITY AUDIX, 
DEFINITY AUDIX, or R1 AUDIX System software. For the DEFINITY 
AUDIX System, the d efault is D-r3.2. For the I
NTUITY AUDIX System, 
the d efault is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Unless -i
 is sp ec ified , p ressing  v
 while the c ommand  is exec uting  
send s the up d ated  transfer status to the sc reen.
-w
Writes a one-line summary of the exit status of this c ommand  into the 
file, main.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and  exits without 
transferring  any sc reens d ata. 
-i
Turns off the searc h for p ossib le sub seq uent entry of the v
 and  q
 
(q uit) op tions. Otherwise, if you typ e ahead , you may lose 
c harac ters. If you d on’t sp ec ify -i
, you must sp ec ify an inp ut file 
(
<  ifile) from whic h the names, extensions, etc ., will b e read.
< 
ifileName of an input file you have c reated . The filename must b e 
p rec ed ed  b y the symb ol < . 
This file c ontains one or more sub sc rib er rec ord s to b e d eleted . 
Eac h rec ord  c ontains a name and  extension. You c an ed it the outp ut 
of the getlist
 c ommand  to g enerate inp ut to this c ommand . If you 
d on’t sp ec ify an input file, you must typ e eac h name and extension 
d irec tly from your keyb oard  after entering this c ommand . 
> 
ofileName of the file to whic h c ommand  statistic s will b e written.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-47 delsub 
13
Errors 
If either the name or extension d oesn’t b elong to a valid system subsc riber, an 
error message d isp lays. If more rec ord s exist, sub sc rib er d eletion c ontinues. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows.
When c onnec ted  to an AUDIX system, only as many c harac ters are req uired  in 
the name field  as need ed  to make the name uniq ue (i.e., the name field  does not 
have to matc h c omp letely the value on the I
NTUITY AUDIX System, DEFINITY 
AU D I X Sys t e m  o r  R1  A U D I X Sy st e m ) .  
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
SUBSCRIBER DELETE ROUTINE 
(
< ADAP version name>)
name = _________; extension = _______;
____: DELETED EXT_________
Example 
The following c ommand d eletes one sub sc rib er from the sub sc rib er d atab ase. 
delsub -i 
Doe, John, 3501 
The following data ap p ears on the sc reen: 
SUBSCRIBER DELETE ROUTINE ()
Doe, John,3501
name = Doe, John; extension = 3501;
1:  DELETED EXT 3501 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1  name C 29 r1v2+ D-r1.0+ I-r2.0+
2 extension K 10 r1v2+ D-r1.0+ I-r2.0+
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-48 setadj 
13
setadj
Set mac hine translation adjunc t d ata 
Syntax 
setadj
 -m mac hine name [-p p assword] [-t mac hine_typ e] 
 [-n
 network_c onnec tion_typ e] [-s
 d ata_rate] [-c c hannel] 
 [-d
 d ial_string] [-q purg e_q ueue] [-N new_mac hine_name] 
 -r
 release [-a | -u
] [-v
] [-w
] [-V
] 
Description 
This c ommand  sets the field  values for the following  sc reen: 
nR1 AUDIX (R1V5 and  b eyond ) system : translation : mac hine : 
ad junc t
Note that the head er transmission sc hed ule c annot b e set with this c ommand . 
-m
Mac hine flag ; must b e followed  b y 
mac hine name. 
mac hine 
nameSets d ata for the sp ec ified  R1 AUDIX mac hine. Note that a sp ac e is 
allowed in the mac hine name p rovided  that the name is enc losed  in 
q uotation marks (suc h as new york). 
-p
AUDIX p assword  flag ; must b e followed by 
p assword. 
passwordSets the password  for the sp ec ified  mac hine. Valid  entries are 5-10 
alphanumeric  characters. 
-t
Mac hine typ e flag ; must b e followed by 
machine type. 
mac hine 
typeSets the mac hine typ e for the sp ec ified  mac hine. Valid  mac hine types 
are t
 for text servic e mac hine and  c
 for CDR mac hine. Note that the 
mac hine typ e may not be c hang ed ; you must instead  d elete and  
reenter the mac hine to c hang e the mac hine type. 
-n
Network c onnec tion typ e flag ; must b e followed  b y 
net c onnec tion 
type
. 
net 
c onnec t 
typeSets the network c onnec tion typ e for the sp ec ified  mac hine. Valid 
c onnec tion types are dcp
, rs232a
, and  rs232s
. 
-s
Data rate flag ; must b e followed by 
d ata rate. 
d ata rateSets the data rate for the sp ec ified  mac hine. Valid  d ata rates are: 
dcp: 1200, 2400, 4800, 9600, 19200, 56000, 64000
 (b ps)
rs232a: 1200, 2400, 4800, 9600, 19200
 (bp s) 
rs232s: 1200, 2400, 4800, 9600, 19200, 56000, 64000
 (bp s)  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-49 setadj 
13
Errors
Using  this c ommand  with an INTUITY or DEFINITY AUDIX System or an R1 AUDIX 
System p rior to R1V5, an error messag e d isp lays. -c
Channel flag ; must be followed  b y 
c hannel. 
c hannelSets the c hannel for the sp ec ified  mac hine. Valid  c hannels are null 
(b lank), 5
 or 6
 for rs232, or null for d c p . 
-d
Dial string  flag ; must b e followed  b y 
dial string. 
d ial stringSets the dial string  for the sp ec ified  mac hine. Valid  entries are 0-65 
alp hanumeric  c harac ters. Null is allowed  for a d ed ic ated  rs232 
c onnec tion type. 
-q
Purg e q ueue flag ; must b e followed  b y 
p urg e q ueue. 
purge 
q ueueSets the purg e q ueue to on or off for the sp ec ified  mac hine. Valid  
entries are y
 for yes or n
 for no. 
-N
New mac hine name flag ; must b e followed b y 
new machine name. 
new 
mac hine 
nameSets the new mac hine name for the sp ec ified  mac hine. Valid  entries 
are 1-10 alphanumeric  c harac ters.
-r
Release flag ; must b e followed  b y 
release. 
releaseSets data for the specified R1 AUDIX System release (R1V5 and 
b eyond ). The d efault is D-r3.2. 
-a | -u
Indicates that the specified machine will be added (a) or deleted (u). 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Pressing  v
 while the c ommand  is exec uting  send s the up d ated  transfer 
status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into the 
file form_req.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and  exits without 
transferring  any sc reens d ata.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-50 setadj 
13
Example 
The following command changes the baud rate for the new york mac hine on the 
system : translation : mac hine : ad junc t sc reen and  writes a summary of the 
transfer statistic s to the sc reen. 
setadj -m new york -s 4800 -r r1v8 -v 
The following c ommand ad d s a mac hine named  
seattle on the system : 
translation : mac hine : ad junc t 
sc reen, defines its attrib utes, and  writes a 
summary of the transfer statistic s to the sc reen. 
setadj -m seattle -p 232124 -t t -n dcp -s 4800 -c  -d 12065354808 -q y -a -r 
r1v8 -v 
The following c ommand d eletes a mac hine named  
miami on the system : 
translation : mac hine : ad junc t 
sc reen and  d isp lays summary transfer statistic s. 
setadj -m miami -u -r r1v8 -v 
RETU RN
RETU RN
RETU RN 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-51 setalogp 
13
setalogp
Set ac tivity log  p arameters
Syntax 
setalogp
 [-a y/n] [-M y/n] [-N nnnn] [-c y/n] [-r
 release]  [-v
] [-w
] [-V
] 
Description 
This c ommand  sets the field  values for the following  sc reens.
nINTUITY AUDIX Chang e System-Parameters Ac tivity-Log
nDEFINITY AUDIX Chang e System-Parameters Ac tivity-Logsn.  
-a
Ac tivity log  flag ; must be followed  b y y or n. 
y/nAc tivates or d eac tivates the ac tivity log . 
-M
Message waiting indicator (MWI)flag; must be followed by 
y or n. 
y/nRec ords or d oes not rec ord  MWIs. 
-N
New max. numb er of ac tivity log entries flag ; must be followed  b y 
nnnn. 
nnnnThe maximum numb er of ac tivity log  entries. If this numb er is 
smaller than the p revious maximum number of entries, the ac tivity 
log  is c leared . 
-c
Clear ac tivity log  flag ; must b e followed  b y 
y or n. 
y/nClears or d oes not c lear the ac tivity log . Defaults to n. 
-r
Release flag ; must b e followed  b y 
release. 
releaseSend s data for the sp ec ified  release of the INTUITY or DEFINITY 
AUDIX System software. For the DEFINITY AUDIX System, the 
d efault is D-r3.2. For the I
NTUITY AUDIX System, the default is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Pressing  v
 while the c ommand  is exec uting  d isp lays the up d ated  
transfer status. 
-w
Writes a one-line summary of the exit status of this c ommand  into 
the file, form_req.rc
. 
-V
Writes the ADAP version number for this c ommand  and  exits without 
transferring  any sc reens d ata.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-52 setalogp 
13
Errors 
If you use this c ommand  with an R1 AUDIX System, an error messag e ap p ears. 
Example 
The following c ommand sets the field  values of the Chang e System-Parameters 
Ac tivity-Log
 sc reen d ata and  writes a summary of the transfer statistic s to the 
sc reen:
setalogp -a y -N 500 -v 
RETU RN 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-53 setscdr 
13
setscdr
Set Call Detail Rec ord ing  d ata 
Syntax 
setscdr
 [-n nnnnnn] [-a y/n] [-s y/n] [-o y/n] [-N y/n] -r release [-v
] [-w
] [-V
] 
Description 
This c ommand  sets the field  values on the system : c d r sc reen for the op tions 
you sp ec ify on the c ommand  line. You c an use the setscdr
 c ommand  with the R1 
AUDIX System (R1V5 and beyond .) No inp ut is req uired .
NOTE:
To use this c ommand , you must have the sep arately-p urc hased Call Detail 
Rec ord ing (CDR) software.
-a
Ac tive Call Detail Rec ord ing  ind ic ator flag ; must b e followed  b y 
y or 
n. 
y/nSets the Call Detail Rec ord ing  ac tive to on (y) or off (n). 
-n
Maximum numb er of CDR rec ord s flag ; must be followed  b y nnnnnn. 
nnnnnnSets the maximum number of CDR rec ord s that c an be stored  
internally in the AUDIX System CDR file. This value must b e b etween 
64000 and  128000 inc lusive. Deac tivate CDR b efore c hanging  this 
field. 
-s
Voic e session rec ord  typ e flag ; must b e followed  b y 
y or n. 
y/nSets the voic e session rec ord  type to on (y) or off (n). 
-o
Outg oing  c all rec ord  typ e flag ; must b e followed  by 
y or n. 
y/nSets the outg oing  c all rec ord typ e to on (y) or off (n). 
-N
Network sessions rec ord typ e flag ; must be followed  b y 
y or n. 
y/nSets the network sessions rec ord  typ e to on (y) or off (n). 
-r
Release flag ; must b e followed  b y a release. 
releaseSets data for the specified R1 AUDIX System release (R1V5 and 
b eyond ). The d efault is D-r3.2. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Pressing v
 while setscdr
 is exec uting  send s the up dated  transfer 
status to the sc reen.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-54 setscdr 
13
Errors 
If you use this c ommand  with an INTUITY or DEFINITY AUDIX System or an R1 
AUDIX System p rior to R1V5, an error messag e d isp lays. 
Example 
The following  c ommand  sets the system : c d r sc reen d ata and  writes a summary 
of the transfer statistic s to the sc reen. 
setscdr -a y -s y -o n -N n -r r1v8 -v     -w
Writes a one-line summary of the exit status of the this c ommand  into 
the file form_req.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and  exits without 
transferring  any sc reens d ata. 
RETU RN