Lucent Technologies Audix Administration And Data Acquisition Guide

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-115 getralar 
12
Example 
The following c ommand retrieves the DEFINITY AUDIX Disp lay Alarms sc reen 
d ata starting  at mid nig ht on Oc tob er 14, 1994, writes a summary of the transfer 
statistic s to the sc reen, and writes outp ut to a file named  ralarms. 
getralar -d 101494 -t 0000 -v > ralarms 
The following data is written to the file: 
ALARM_BD,01B07,MIN,0,n,19941014,1231,19941014, 
1253,Reboot 
The file may c ontain multip le lines, one for eac h rec ord . 
The following c ommand retrieves the AUDIX R1V8 maintenanc e : resolved
alarm : d isp lay sc reen d ata starting  at mid nig ht on Oc tob er 26, 1994, writes a 
summary of the transfer statistic s to the sc reen, and writes outp ut to a file named  
ralarms. 
getralar -r r1v8 -d 102694 -t 0000 -v > ralarms 
The following data is written to the file: 
19941026,0157,19941026,0228,1024,1,36,21 
5 fault N 4 r1v2+
6 level N 1 r1v2+
7 unit N 3 r1v2+
8 devic e N 2 r1v2+
FIELD       VOICE MAIL VERSIONS
Seq. 
No.Field Name TypeMax.
WidthR1
AUDIX
System 
DEFINITY
AUDIX
SystemI
NTUITYAUDIX
System
RETURN
NEWLINE
RETURN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-116 getrem 
12
getrem
Get remote messag e measurements 
Syntax 
getrem
  -f day [-d mmd d yy]  -m mac hine [-n nn]  [-r release]  [-v] [-w] [-V] [> ofile]
or
getrem
  -f
 month [-d mmyy]  -m mac hine [-n nn] [-r release]  [-v] [-w] [-V] [> ofile]
Description 
This c ommand  retrieves the following  sc reens b y the d ate you sp ec ify in the 
c ommand  op tions: 
nINTUITY AUDIX List Measurements Remote-Messag es Day
nDEFINITY AUDIX List Measurements Remote-Messag es Day 
nR1 AUDIX (R1V3 and  b eyond ) traffic  : remote messag es : d ay 
This c ommand  retrieves the following  sc reens b y the month you sp ec ify in the 
c ommand  op tions: 
nINTUITY AUDIX Measurements Remote-Messag es Month 
nDEFINITY AUDIX Measurements Remote-Messag es Month 
nR1 AUDIX (R1V3 and  b eyond ) traffic  : remote messag es : month 
No inp ut is required . Retrieved  data is written to stand ard outp ut. 
-f
Sc reen flag ; must b e followed  b y either day
 or month
. 
day
Retrieves the d ay version of the sc reen. 
month
Retrieves the month version of the sc reen.
-d
Date flag ; must b e followed  b y 
mmddyy for the day
 sc reen or mmyy 
for the month
 sc reen. Req uired  for with AUDIX systems. If this flag  
is omitted , the most rec ent d ate’s d ata is returned . 
mmdd yy Retrieves d ata for the month, d ay, and  year ind ic ated  b y 
mmddyy. 
For examp le, if you enter 072294
, the d ata for July 22, 1994, is 
retrieved . 
mmyy Retrieves d ata for the month and  year ind ic ated  b y 
mmyy. For 
examp le, if you enter 0194
 the d ata for January 1994 is retrieved . 
-m
Remote mac hine flag ; must be followed  b y 
mac hine.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-117 getrem 
12
mac hine Retrieves d ata for the sp ec ified  remote mac hine. For mac hine, use 
the mac hine name that was entered  on the ad ministrator’s I
NTUITY or 
DEFINITY AUDIX sc reen or the R1 AUDIX system : translation: 
mac hine : aud ix sc reen when the remote mac hine was ad d ed  to the 
network. If the mac hine name is more than one word  (suc h as 
new 
york
), the name must b e enc losed  in q uotation marks. 
-n
Numb er of rec ord s flag ; must b e followed  b y 
nn. If you d on’t inc lud e 
this flag , only one rec ord  (hour or d ay) is returned . For the I
NTUITY or 
DEFINITY AUDIX System, you may use the value 
all to retrieve all 
rec ord s (hour or d ay) on or after any sp ec ified  d ate and  time. 
nn Retrieves the numb er (
nn) of d aily or monthly rec ords that you 
sp ec ify. For examp le, if you want to retrieve d aily d ata and  you 
enter 072294
 for 
mmddyy and  then enter 5
 for nn, the d ata from and  
inc lud ing July 22, 1994, and  c ontinuing  throug h July 26, 1994, (the 
d ata for July 22 and  c ontinuing  throug h the next 5 d ays) is 
retrieved . 
The same is true for monthly rec ord s. If you enter 0194
 for 
mmyy 
and  then enter 8
 for 
nn, the data from and  inc lud ing  January 1994 
and  c ontinuing  through Aug ust 1994 is retrieved . 
-r
Release flag ; must b e followed  b y 
release. 
release Retrieves d ata for the sp ec ified  release of the I
NTUITY AUDIX, 
DEFINITY AUDIX, or R1 AUDIX software (R1V3 and  b eyond) 
System software. The d efault for the DEFINITY AUDIX System is 
D-r3.2. The d efault for the I
NTUITY AUDIX System is I-r5.0.
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Pressing  v
 while the c ommand  is exec uting send s the up d ated  
transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into 
the file, form_req.rc
. 
-V
Writes the ADAP version numb er for this c ommand and  exits 
without transferring  any sc reens d ata. 
>  ofile Sp ec ifies the name of the file to whic h data is written. The filename 
must be preceded by the symbol >
. If no outp ut file is sp ec ified , 
d ata is written to the sc reen.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-118 getrem 
12
Errors 
If you try to use this c ommand  with an R1 AUDIX R1V2 System, or if you enter an 
invalid mac hine name, an error messag e ap p ears on the sc reen. 
If the d ate is not valid  when c ommunic ating  with an R1 AUDIX system, the 
retrieval is ab orted  and  no rec ord s are written. 
When c ommunic ating  with an I
NTUITY or DEFINITY AUDIX system, if the sp ec ified  
d ate is b efore any valid d ate, the retrieval starts at the first date with d ata. If the 
sp ec ified  d ate is after a valid d ate, an error messag e is returned  and  the retrieval 
is ab orted . 
Output Format
Outp ut for the getrem
 c ommand  with the -f day
 op tion is formatted  as follows, 
with one rec ord for eac h d ay.
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX
System 
DEFINITY
AUDIX
SystemI
NTUITY
AUDIX
System
1 mac hine name C 10 r1v3+ D-r1.0+ I-r2.0+
2 starting  d ate D 8 r1v3+ D-r1.0+ I-r2.0+
3 end ing time T 4 r1v3+ D-r1.0+ I-r2.0+
4 loc al orig  prime transfer sessions N 5 r1v3+ D-r1.0+ I-r2.0+
5 loc al orig  non-p rime transfer sessions N 5 r1v3+ D-r1.0+ I-r2.0+
6 remote orig  p rime transfer sessions N 5 r1v3+ D-r1.0+ I-r2.0+
7 remote orig  non-prime transfer sessions N 5 r1v3+ D-r1.0+ I-r2.0+
8 loc al orig  prime usag e in sec ond s N 7 r1v3+ D-r1.0+ I-r2.0+
9 loc al orig  non-p rime usag e in sec ond s N 7 r1v3+ D-r1.0+ I-r2.0+
10 remote orig  p rime usag e in sec onds N 7 r1v3+ D-r1.0+ I-r2.0+
11 remote orig  non-prime usage in sec ond s N 7 r1v3+ D-r1.0+ I-r2.0+
12 loc al orig  prime averag e usage N 7 r1v3+ D-r1.0+ I-r2.0+
13 loc al orig  non-p rime averag e usag e N 7 r1v3+ D-r1.0+ I-r2.0+
14 remote orig  p rime average usag e N 7 r1v3+ D-r1.0+ I-r2.0+
15 remote orig  non-prime averag e usage N 7 r1v3+ D-r1.0+ I-r2.0+
16 loc al orig  prime messages sent N 6 r1v3+ D-r1.0+ I-r2.0+
17 loc al orig  non-p rime messag es sent N 6 r1v3+ D-r1.0+ I-r2.0+
18 remote orig  p rime messag es sent N 6 r1v3+ D-r1.0+ I-r2.0+
19 remote orig  non-prime messages sent N 6 r1v3+ D-r1.0+ I-r2.0+
20 loc al orig  prime messages rejec ted N 6 r1v3+ D-r1.0+ I-r2.0+
21 loc al orig  non-p rime messag es rejec ted N 6 r1v3+ D-r1.0+ I-r2.0+
22 remote orig  p rime messag es rejec ted N 6 r1v3+ D-r1.0+ I-r2.0+
23 remote orig non-p rime messag es rejec ted N 6 r1v3+ D-r1.0+ I-r2.0+ 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-119 getrem 
12
24 loc al orig  prime status sent N 6 r1v3+ D-r1.0+ I-r2.0+
25 loc al orig  non-p rime status sent N 6 r1v3+ D-r1.0+ I-r2.0+
26 remote orig  p rime status sent C 3 r1v3+ D-r1.0+ I-r2.0+
27 remote orig  non-prime status sent C 3 r1v3+ D-r1.0+ I-r2.0+
28 loc al orig  prime status rec eived C 3 r1v3+ D-r1.0+ I-r2.0+
29 loc al orig  non-p rime status rec eived C 3 r1v3+ D-r1.0+ I-r2.0+
30 remote orig  p rime status rec eived N 6 r1v3+ D-r1.0+ I-r2.0+
31 remote orig  non-prime status rec eived N 6 r1v3+ D-r1.0+ I-r2.0+
32
message transmission threshold  exc ep tionsN 7 r1v3+ D-r1.0+ I-r2.0+
33 session failures on far end no answer N 5 r1v3+ D-r1.0+ I-r2.0+
34 loc al orig  prime headers sent N 6 r1v4+ D-r1.0+ I-r2.0+
35 loc al orig  non-p rime head ers sent N 6 r1v4+ D-r1.0+ I-r2.0+
36 mac hine typ e C 12 r1v4+ D-r1.0+ I-r2.0+
37 loc al orig  prime ad min up dates N 6
D-r3.2+ I-r5.0+
38 loc al orig  non-p rime admin up d ates N 6
D-r3.2+ I-r5.0+
39 remote orig  p rime ad min upd ates N 6
D-r3.2+ I-r5.0+
40 remote orig  non-prime ad min up dates N 6
D-r3.2+ I-r5.0+
41 loc al voic e c omponents - prime N 6
I-r5.0+
42 loc al voic e c omponents - non-p rime N 6
I-r5.0+
43 remote voic e c omp onents - p rime N 6
I-r5.0+
44 remote voic e c omp onents - non-prime N 6
I-r5.0+
45 loc al FAX c omponents - prime N 6
I-r5.0+
46 loc al FAX c omponents - non-p rime N 6
I-r5.0+
47 remote FAX c omp onents - p rime N 6
I-r5.0+
48 remote FAX c omp onents - non-prime N 6
I-r5.0+
49 loc al b inary attac hments - p rime N 6
I-r5.0+
50 loc al b inary attac hments - non-p rime N 6
I-r5.0+
51 remote b inary attac hments - prime N 6
I-r5.0+
52 remote b inary attac hments - non-p rime N 6
I-r5.0+
53 loc al text c omp onents - p rime N 6
I-r5.0+
54 loc al text c omp onents - non-p rime N 6
I-r5.0+
55 remote text c omponents - p rime N 6
I-r5.0+
56 remote text c omponents - non-p rime N 6
I-r5.0+ FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX
System 
DEFINITY
AUDIX
SystemI
NTUITY
AUDIX
System 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-120 getrem 
12
Outp ut for the getrem
 c ommand  with the -f month
 arg ument is formatted  as 
follows, with one rec ord  for eac h month.
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX
System 
DEFINITY
AUDIX
SystemI
NTUITYAUDIX
System
1 mac hine name C 10 r1v3+ D-r1.0+ I-r2.0+
2 starting  d ate D 8 r1v3+ D-r1.0+ I-r2.0+
3 end ing  date D 8 r1v3+ D-r1.0+ I-r2.0+
4 loc al orig  p rime transfer sessions N 5 r1v3+ D-r1.0+ I-r2.0+
5 loc al orig  non-prime transfer sessions N 5 r1v3+ D-r1.0+ I-r2.0+
6 remote orig p rime transfer sessions N 5 r1v3+ D-r1.0+ I-r2.0+
7 remote orig non-p rime transfer sessions N 5 r1v3+ D-r1.0+ I-r2.0+
8 loc al orig  p rime usag e in sec onds N 7 r1v3+ D-r1.0+ I-r2.0+
9 loc al orig  non-prime usag e in sec ond s N 7 r1v3+ D-r1.0+ I-r2.0+
10 remote orig p rime usag e in sec ond s N 7 r1v3+ D-r1.0+ I-r2.0+
11 remote orig non-p rime usag e in sec onds N 7 r1v3+ D-r1.0+ I-r2.0+
12 loc al orig  p rime average usag e N 7 r1v3+ D-r1.0+ I-r2.0+
13 loc al orig  non-prime averag e usage N 7 r1v3+ D-r1.0+ I-r2.0+
14 remote orig p rime averag e usag e N 7 r1v3+ D-r1.0+ I-r2.0+
15 remote orig non-p rime average usag e N 7 r1v3+ D-r1.0+ I-r2.0+
16 loc al orig  p rime messag es sent N 6 r1v3+ D-r1.0+ I-r2.0+
17 loc al orig  non-prime messages sent N 6 r1v3+ D-r1.0+ I-r2.0+
18 remote orig p rime messag es sent N 6 r1v3+ D-r1.0+ I-r2.0+
19 remote orig non-p rime messag es sent N 6 r1v3+ D-r1.0+ I-r2.0+
20 loc al orig  p rime messag es rejec ted N 6 r1v3+ D-r1.0+ I-r2.0+
21 loc al orig  non-prime messages rejec ted N 6 r1v3+ D-r1.0+ I-r2.0+
22 remote orig p rime messag es rejec ted N 6 r1v3+ D-r1.0+ I-r2.0+
23 remote orig  non-prime messag es rejec ted N 6 r1v3+ D-r1.0+ I-r2.0+
24 loc al orig  p rime status sent N 6 r1v3+ D-r1.0+ I-r2.0+
25 loc al orig  non-prime status sent N 6 r1v3+ D-r1.0+ I-r2.0+
26 remote orig p rime status sent C 3 r1v3+ D-r1.0+ I-r2.0+
27 remote orig non-p rime status sent C 3 r1v3+ D-r1.0+ I-r2.0+
28 loc al orig  p rime status rec eived C 3 r1v3+ D-r1.0+ I-r2.0+
29 loc al orig  non-prime status rec eived C 3 r1v3+ D-r1.0+ I-r2.0+
30 remote orig p rime status rec eived N 6 r1v3+ D-r1.0+ I-r2.0+
31 remote orig non-p rime status rec eived N 6 r1v3+ D-r1.0+ I-r2.0+
32
messag e transmission threshold exc eptionsN 7 r1v3+ D-r1.0+ I-r2.0+
33 session failures on far end  no answer N 5 r1v3+ D-r1.0+ I-r2.0+
34 loc al orig  p rime head ers sent N 6 r1v4+ D-r1.0+ I-r2.0+
35 loc al orig  non-prime headers sent N 6 r1v4+ D-r1.0+ I-r2.0+
36 mac hine type C 12 r1v4+ D-r1.0+ I-r2.0+
37 loc al orig  p rime ad min upd ates N 6
D-r3.2+ I-r5.0+
38 loc al orig  non-prime ad min up dates N 6
D-r3.2+ I-r5.0+ 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-121 getrem 
12
Example 
The following c ommand retrieves the DEFINITY AUDIX List Measurements 
Remote-Messag es Day sc reen d ata for July 22, 1994, writes a summary of the 
transfer statistic s to the sc reen, and  writes outp ut to a file named  d ayld s. 
getrem -f day -d 072294 -m new york -v > daylds 
The following data is written to the file: 
new york,19940722,2359,2,84,1,62,111,4251,206,
8018,55,50,206,129,2,43,8,257,0,0,0,0,15,460,n/a,
n/a,n/a,n/a,0,25,0,0,0,0,audix,0,0,0,0 
39 remote orig p rime admin up d ates N 6D-r3.2+ I-r5.0+
40 remote orig non-p rime ad min upd ates N 6
D-r3.2+ I-r5.0+
41 loc al voic e c omp onents - p rime N 6
I-r5.0+
42 loc al voic e c omp onents - non-prime N 6
I-r5.0+
43 remote voic e c omp onents - p rime N 6
I-r5.0+
44 remote voic e c omp onents - non-p rime N 6
I-r5.0+
45 loc al FAX c omp onents - p rime N 6
I-r5.0+
46 loc al FAX c omp onents - non-prime N 6
I-r5.0+
47 remote FAX c omp onents - p rime N 6
I-r5.0+
48 remote FAX c omp onents - non-p rime N 6
I-r5.0+
49 loc al b inary attac hments - prime N 6
I-r5.0+
50 loc al b inary attac hments - non-p rime N 6
I-r5.0+
51 remote binary attac hments - p rime N 6
I-r5.0+
52 remote binary attac hments - non-prime N 6
I-r5.0+
53 loc al text c omponents - prime N 6
I-r5.0+
54 loc al text c omponents - non-p rime N 6
I-r5.0+
55 remote text c omp onents - p rime N 6
I-r5.0+
56 remote text c omp onents - non-p rime N 6
I-r5.0+ FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX
System 
DEFINITY
AUDIX
SystemI
NTUITY
AUDIX
System
RETURN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-122 getrlist 
12
getrlist
Get remote extension list 
Syntax 
getrlist
 -m mac hine [-r release] [-v
] [-w
] [-V
] [> ofile] 
Description 
This c ommand  retrieves all p ag es of the following sc reens for the spec ified  
mac hine: 
nINTUITY AUDIX List Remote-Extensions 
nDEFINITY AUDIX List Remote-Extensions 
nR1 AUDIX (R1V3 and  b eyond ) list : extension : remote
No inp ut is required . Retrieved  data is written to stand ard outp ut. 
-m
Remote mac hine flag; must b e followed  b y 
mac hine. 
mac hine Retrieves d ata for the sp ec ified  remote mac hine. For 
machine, use 
the mac hine name that was entered  on the administrator’s I
NTUITY or 
DEFINITY AUDIX Mac hine or the AUDIX system : translation : 
mac hine : aud ix sc reen when the remote mac hine was ad d ed  to the 
network. If the mac hine name is more than one word  (suc h as 
new 
york
), the name must b e enc losed  in q uotation marks. 
-r
Release flag ; must b e followed  b y 
release. 
release Retrieves d ata for the sp ec ified  release of the I
NTUITY AUDIX, 
DEFINITY AUDIX, or R1 AUDIX (R1V3 and  b eyond ) System 
software. The default for the DEFINITY AUDIX System is D-r3.2. The 
d efault for the I
NTUITY AUDIX System is I-r5.0
-v
Writes transfer statistic s to the sc reen at the end of the transfer. 
Pre ss i n g  v
 while the c ommand  is exec uting  send s the up dated  
transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into 
the file, form_req.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and  exits without 
transferring  any sc reens d ata. 
>  ofile Sp ec ifies the name of the file to whic h d ata is written. The filename 
must b e p rec ed ed b y the symb ol > . If no outp ut file is sp ec ified , 
d ata is written to the sc reen.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-123 getrlist 
12
Errors 
If you try to use this c ommand  with an R1 AUDIX R1V2 System, an error messag e 
ap p ears on the sc reen. 
Output Format
Outp ut for the getrlist
 c ommand  is formatted  as follow, with one rec ord for eac h 
remote sub sc rib er.
Example 
The following  c ommand  retrieves the INTUITY and DEFINITY AUDIX List Extension 
Remote sc reen d ata for all I
NTUITY o r  D EFI N I TY AU D I X Sys t e m  Re m o t e  Su b s c r ib -
ers for the spec ified remote mac hine (in this c ase 
seattle), writes a summary of 
the transfer statistic s to the sc reen, and  writes outp ut to a file named  rextens. 
getrlist -m seattle -v > rextens 
The following data is written to the file, one line for eac h remote sub sc rib er: 
74101,Jones, Sam,administered,19940328 
The following  c ommand  retrieves the AUDIX R1V8 list : extension : remote sc reen 
d ata for all R1 AUDIX System remote sub sc ribers for the sp ec ified  remote 
mac hine (in this c ase 
seattle), writes a summary of the transfer statistic s to the 
sc reen, and  writes outp ut to a file named  rextens. 
getrlist -m seattle -r r1v8 -v > rextens 
The following data is written to the file, one line for eac h remote sub sc rib er: 
15498,Fong, Ming,a,19940208 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX
System 
DEFINITY
AUDIX
SystemI
NTUITY
AUDIX
System
1 extension K 10 r1v3+ D-r1.0+ I-r2.0+
2 name C 29 r1v3+ D-r1.0+ I-r2.0+
3 type C 12 r1v3+ D-r1.0+ I-r2.0+
4 usag e d ate D 8 r1v3+ D-r1.0+ I-r2.0+
RETURN
NEWLINE
RETURN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Retrieval Commands 
12-124 getrsub 
12
getrsub
Get remote sub sc rib er d ata 
Syntax 
getrsub -m mac hine/trusted  server [-r release] [-v
] [-w
] [-V
] [-i
] [<  ifile] [> ofile] 
Description 
This c ommand  retrieves d ata for the sub sc rib ers and  mac hine that you sp ec ify 
for the following  sc reens: 
nINTUITY AUDIX Disp lay Remote-Sub sc rib er
nDEFINITY AUDIX Disp lay Remote-Sub sc rib er
nR1 AUDIX (R1V3 and  b eyond ) sub sc rib er : remote 
Use sub sc rib er extension or text ad dress as inp ut. Retrieved d ata is written to 
stand ard  outp ut. 
-m
Remote mac hine flag ; must b e followed  b y mac hine or trusted  
server name. 
mac hine
/trusted  
serverRetrieves d ata for the sp ec ified  remote mac hine or trusted  server. 
For 
mac hine, use the mac hine name that was entered  on the 
administrator’s I
NTUITY or DEFINITY AUDIX Mac hine or the R1 
AUDIX system : translation : mac hine : aud ix sc reen when the 
remote mac hine was ad d ed  to the network. If the mac hine name is 
more than one word  (suc h as 
new york
), the name must b e 
enc losed  in q uotation marks. 
For
 trusted  server, use the trusted server name that was entered  
on the I
NTUITY AUDIX Trusted  Server Profile sc reen when the 
server was ad d ed to that system.
-r
Release flag ; must b e followed  b y 
release. 
release Retrieves d ata for the sp ec ified  release of the I
NTUITY AUDIX, 
DEFINITY AUDIX, or R1 AUDIX (R1V3 and  beyond ) System 
software. The d efault for the DEFINITY AUDIX System is D-r3.2. 
The d efault for the I
NTUITY AUDIX System is I-r5.0.
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Unless i
 is sp ec ified , p ressing  v
 while the c ommand  is exec uting  
sends the upd ated  transfer status to the sc reen.