Lucent Technologies Audix Administration And Data Acquisition Guide

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-5 addsub 
13
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows.
When c onnec ted  to an R1 AUDIX system, you c annot enter a c ustom c lass of 
servic e while using  this c ommand . If a new sub sc riber req uires a c ustom c lass of 
servic e, first enter a reg ular c lass of servic e; then alter the sub sc rib er rec ord  later 
on the ad ministration terminal or with another d atab ase mod ific ation c ommand . 
When c onnec ted  to a I
NTUITY or DEFINITY AUDIX system, you may use the value 
c ustom for the c lass of servic e. The servic e attrib ute values for c lass of servic e 0 
are used , b ut the sub sc rib er’s c lass of servic e are not assoc iated  with c lass of 
service 0 (i.e. if class of service 0 chang es, the sub scrib er’s c lass of servic e 
d oes not c hang e). 
Output Format
The outp ut for eac h rec ord  c onsists of the c ommand statistic s as follows
SUBSCRIBER ADD ROUTINE ()
name = __________; extension = _______; password = ____; 
cos = ____; switch number = ________; 
community id = _______________; 
____: ADDED EXT __________
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1 name C 29 r1v2+ D-r1.0+ I-r2.0+
2 extension K 10 r1v2+ D-r1.0+ I-r2.0+
3 password C 15 r1v2+ D-r1.0+ I-r2.0+
4 [ c lass of servic e] K 8 r1v2+ D-r1.0+ I-r2.0+
5 [ switc h numb er] N 2 r1v2+ D-r1.0+ I-r2.0+
6 [ c ommunity id ] N 2 r1v2+ D-r1.0+ I-r2.0+ 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-6 addsub 
13
Example
The following c ommand ad d s one subsc rib er to the sub sc rib er d atab ase. 
addsub -i 
Doe, John,3501,0,0,0,1 
The following data ap p ears on the sc reen: 
SUBSCRIBER ADD ROUTINE 
(
< ADAP version name>)
Doe, John,3501,0,0,0,1
name = Doe, John; extension = 3501; password = 0; cos = 0;
switch number = 0; community id = 1;
1:  ADDED EXT 3501 
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-7 changcex 
13
changcex 
Chang e sub sc rib er c overing  extension 
Syntax 
changcex
 [-r release] [-v
] [-w
] [-V
] [-i
] [< ifile] [> ofile] 
Description 
This c ommand  mod ifies subsc riber c overing  extensions in the c urrent datab ase 
of the voic e mail system. Use the name, extension, and  new c overing  extension 
as inp ut for eac h sub sc rib er. Command  statistic s are written to stand ard  outp ut. 
-r
Release flag ; must b e followed  b y 
release. 
releaseSets d ata for the sp ec ified  release of the INTUITY AUDIX, DEFINITY 
AUDIX, or R1 AUDIX System software. For the DEFINITY AUDIX 
System, the d efault is D-r3.2. For the I
NTUITY AUDIX System, the 
d efault is I-r5.0.
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Unless -i
 is sp ec ified , p ressing  v
 while the c ommand  is exec uting  
send s the up d ated  transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into the 
file, main.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and  exits without 
transferring  any sc reens d ata. 
-i
Turns off the searc h for p ossib le sub seq uent entry of the v
 and q
 
(q uit) op tions. Otherwise, if you typ e ahead , you may lose 
c harac ters. If you d on’t sp ec ify -i
, you must sp ec ify an inp ut file 
(
<  ifile) from whic h the names, extensions, etc ., will b e read . 
< 
ifileName of an inp ut file you have c reated . The filename must b e 
preceded by the symbol  
ofileName of the file to whic h c ommand  statistic s are written.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-8 changcex 
13
Errors 
If either the name or extension d oesn’t b elong to a valid system subsc riber, an 
error message d isp lays. If more rec ords exist in the inp ut, d atab ase mod ific ation 
c ontinues with the next inp ut rec ord. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows: 
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
CHANGE COVERING EXTENSION ROUTINE 
(
< ADAP version name>)
name = ___________; extension = _______; 
new covering ext. = _______;
____: CHANGED COVERING EXT _________
_
Example 
The following command modifies one subscriber in the subscriber database. 
changcex -i 
Martinez, Bob,73101,73102 
The following data appears on the screen: 
CHANGE COVERING EXTENSION ROUTINE 
(
< ADAP version name>)
Martinez, Bob,73101,73102
name = Martinez, Bob; extension = 73102; 
new covering ext. = 73102;
1:  CHANGED COVERING EXT 73102 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1 name C 29 r1v2+ D-r1.0+ I-r2.0+
2 extension K 10 r1v2+ D-r1.0+ I-r2.0+
3 new c overing  extension K 10 r1v2+ D-r1.0+ I-r2.0+
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-9 changcom 
13
changcom
Chang e sub sc rib er c ommunity ID 
Syntax 
changcom
 [-r release] [-v
] [-w
] [-V
] [-i
] [< ifile] [> ofile] 
Description 
This c ommand  mod ifies sub sc rib er c ommunity IDs in the c urrent d atabase of the 
voic e mail system. Use the name, extension, and  new c ommunity ID as inp ut for 
eac h sub sc rib er. Command  statistic s are written to stand ard  outp ut. 
-r
Release flag ; must b e followed  b y 
release. 
releaseSets d ata for the sp ec ified  release of the INTUITY AUDIX, DEFINITY 
AUDIX or AUDIX (R1V5 and  b eyond ) System software. For the 
DEFINITY AUDIX System, the d efault is D-r3.2. For the I
NTUITY AUDIX 
System, the d efault is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end of the transfer. 
Unless -i
 is specified, pressing v
 while the c ommand  is exec uting  
send s the up d ated transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into the 
file, main.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and  exits without 
transferring  any sc reens d ata. 
-i
Turns off the searc h for p ossib le sub seq uent entry of the v
 and  q
 (q uit) 
op tions. Otherwise, if you typ e ahead , you may lose c harac ters. 
If you d on’t sp ec ify -i
, you must sp ec ify an input file (
< ifile) from whic h 
the names, extensions, etc ., will b e read . 
< 
ifileName of an inp ut file you have c reated . The filename must be 
preceded by the symbol  
ofileSp ec ifies the file to whic h c ommand  statistic s are written.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-10 changcom 
13
Errors 
If either the name or extension d oes not b elong  to a valid system sub sc riber, an 
error message d isp lays on the sc reen. If more rec ord s exist, d atab ase 
mod ific ation c ontinues. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows:
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
CHANGE COMMUNITY ID ROUTINE 
(
< ADAP version name>)
name___________; extension = ________;
new community id = _____;
____: CHANGED COMMUNITY ID__________
Example 
The following command modifies one subscriber in the subscriber database. 
changcom -i 
Doe, John,73101,3 
The following data ap p ears on the sc reen: 
CHANGE COMMUNITY ID ROUTINE 
(
< ADAP version name>)
Doe, John,73101,3
name = Doe, John; extension = 73101; 
new community id = 3;
5: CHANGED COMMUNITY ID 3 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1 name C 29 r1v5+ D-r1.0+ I-r2.0+
2 extension K 10 r1v5+ D-r1.0+ I-r2.0+
3 new c ommunity id C 2 r1v5+ D-r1.0+ I-r2.0+
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-11 changcos 
13
changcos
Chang e sub scrib er c lass of servic e 
Syntax 
changcos
 [-r release] [-v
] [-w
] [-V
] [-i
]  [< ifile] [> ofile] 
Description 
This c ommand  mod ifies sub sc rib er c lasses of servic e in the c urrent d atab ase of 
the voic e mail system. Use the name, extension, and  new c lass of servic e as 
input for eac h sub sc rib er. Command  statistic s are written to stand ard  outp ut. 
-r
Release flag ; must b e followed  b y 
release. 
releaseSets d ata for the sp ec ified  release of the INTUITY AUDIX, DEFINITY 
AUDIX, or R1 AUDIX System software. For the DEFINITY AUDIX 
System, the d efault is D-r3.2. For the I
NTUITY AUDIX System, the 
d efault is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Unless -i
 is sp ec ified , p ressing  v
 while the c ommand  is exec uting  
send s the up d ated  transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into the 
file, main.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and  exits without 
transferring  any sc reens d ata. 
-i
Turns off the searc h for p ossib le sub seq uent entry of the v
 and q
 
(q uit) op tions. Otherwise, if you typ e ahead , you may lose 
c harac ters. If you d on’t sp ec ify -i
, you must sp ec ify an inp ut file (
< 
ifile
) from whic h the names, extensions, etc ., will b e read .
< 
ifileName of an inp ut file you have c reated . The filename must b e 
preceded by the symbol  
ofileSp ec ifies the file to whic h c ommand statistic s will b e written.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-12 changcos 
13
Errors 
If either the name or extension d oesn’t b elong to a valid system subsc riber, an 
error message d isp lays. If more rec ord s exist, d atab ase mod ific ation c ontinues. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows: 
You may use the value 
custom for the c lass of servic e. The sub sc rib er’s c urrent 
c lass of servic e parameters are retained , b ut the sub sc rib er’s c lass of servic e is 
not assoc iated  with the orig inal (or any) c lass of servic e thereafter (i.e. if the 
orig inal c lass of servic e c hang es, the sub sc rib er’s attrib utes d o not c hang e). 
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
CHANGE COS ROUTINE 
(
)
name = __________; extension = ________; new cos = _______;
____: CHANGED COS__________
Example 
The following command modifies one subscriber in the subscriber database. 
changcos -i 
Brown, Jane, 73101, 3 
The following data ap p ears on the sc reen: 
CHANGE COS ROUTINE 
(
)
Brown, Jane,73101,3
name = Brown, Jane; extension = 73101; new cos = 3;
1:  CHANGED COS 3 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1 name C 29 r1v2+ D-r1.0+ I-r2.0+
2 extension K 10 r1v2+ D-r1.0+ I-r2.0+
3 new c lass of servic e C 8 r1v2+ D-r1.0+ I-r2.0+
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-13 changext 
13
changext
Change subscriber extension 
Syntax 
changext
 [-r release] [-v
] [-w
] [-V
] [-i
] [< ifile] [> ofile] 
Description 
This c ommand  mod ifies subsc riber extensions in the c urrent d atab ase of the 
voic e mail system. Use the name, old extension, and  new extension as inp ut for 
eac h sub sc rib er. Command  statistic s are written to stand ard  outp ut. 
-r
Release flag ; must b e followed  b y 
release. 
releaseSets d ata for the sp ec ified  release of the INTUITY AUDIX, DEFINITY 
AUDIX, or R1 AUDIX System software. For the DEFINITY AUDIX 
System, the d efault is D-r3.2. For the I
NTUITY AUDIX System, the 
d efault is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Unless -i
 is sp ec ified , p ressing  v
 while the c ommand  is exec uting 
send s the up d ated  transfer status to the sc reen.
-w
Writes a one-line summary of the exit status of this c ommand  into the 
file, main.rc
. 
-V
Writes the ADAP version numb er for this c ommand and exits without 
transferring  any sc reens d ata. 
-i
Turns off the searc h for possib le sub seq uent entry of the v
 and  q
 
(q uit) op tions. Otherwise, if you typ e ahead , you may lose 
c harac ters. If you don’t sp ec ify -i
, you must sp ec ify an inp ut file (
< 
ifile
) from whic h the names, extensions, etc ., will b e read .
< 
ifileName of an inp ut file you have c reated . The filename must b e 
p rec ed ed  b y the symb ol < . 
This file c ontains one or more sub sc rib er rec ord s to b e mod ified . 
Eac h rec ord inc ludes name, old  extension, and  new extension. You 
c an edit the outp ut of the getlist
 c ommand to g enerate inp ut to this 
c ommand . If you d on’t sp ec ify an inp ut file, typ e eac h name, old  
extension, and  new extension d irec tly from your keyb oard  after 
entering  this c ommand . 
> 
ofileName of the file to whic h c ommand  statistic s will b e written.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-14 changext 
13
Errors 
If either the name or old  extension d oesn’t b elong  to a valid  system sub sc rib er, 
an error messag e d isp lays. If more rec ord s exist, d atab ase mod ific ation 
c ontinues. Sinc e no d up lic ates for extensions are allowed , make sure you ord er 
the file c orrec tly. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er formatted as follows: 
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
CHANGE EXTENSION ROUTINE 
(
< ADAP version name>)
name = __________; extension = ________; 
new extension = _____;
____: CHANGED EXT__________
Example 
The following command modifies one subscriber in the subscriber database. 
changext -i 
Doe, John,73101,73199 
The following data ap p ears on the sc reen: 
CHANGE EXTENSION ROUTINE 
(
< ADAP version name>)
Doe, John,73101,73199
name = Doe, John; extension = 73101; new extension = 73199;
1: CHANGED EXT 73199 (NEW) 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1 name C 29 r1v2+ D-r1.0+ I-r2.0+
2 old extension K 10 r1v2+ D-r1.0+ I-r2.0+
3 new extension K 10 r1v2+ D-r1.0+ I-r2.0+
RETU RN
RETU RN
NEWLINE