Lucent Technologies Audix Administration And Data Acquisition Guide

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-35 changtex 
13
Example 
The following command modifies one subscriber in the subscriber database. 
changtex -r r1v6 -i 
Jones, David, 34543, lab2, dvj 
The following data ap p ears on the sc reen
: 
CHANGE TEXT SERVICE MACHINE/USER ID ROUTINE 
(
)
name = Jones, David; ext = 34543; 
new text service machine = lab2; new user id = dvj;
1:  CHANGED TEXT SERVICE MACHINE lab2/USER ID dvj 
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-36 chgrcom 
13
chgrcom
Chang e remote sub sc rib er c ommunity ID 
Syntax 
chgrcom
 [-r release] [-v
] [-w
] [-V
] [-i
] [< ifile] [> ofile]
Description 
This c ommand  mod ifies remote sub sc rib er c ommunity IDs in the c urrent 
d atab ase of the voic e mail system. Use the name, extension, and  new 
c ommunity ID for eac h sub sc rib er as inp ut. Command  statistic s are written to 
stand ard  outp ut. 
-r
  Release flag ; must b e followed  b y 
release. 
releaseSets data for the sp ec ified  release of the INTUITY AUDIX, DEFINITY 
AUDIX, or R1 AUDIX (R1V5 and  beyond ) System software. For the 
DEFINITY AUDIX System the d efault is D-r3.2. For the I
NTUITY AUDIX 
System, the d efault is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Unless -i
 is sp ec ified , p ressing  v
 while the c ommand  is exec uting  
send s the up dated  transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into the 
file, main.rc. 
-V
Writes the ADAP version numb er for this c ommand  and  exits without 
transferring  any sc reens d ata. 
-i
Turns off the searc h for p ossib le sub seq uent entry of the v
 and q
 (q uit) 
op tions. Otherwise, if you typ e ahead , you may lose c harac ters. 
If you d on’t sp ec ify -i
, you must sp ec ify an inp ut file (
< ifile) from whic h 
the names, extensions, etc ., will b e read . 
< 
ifileName of an inp ut file you have c reated . The filename must b e 
p rec ed ed  b y the symbol < . 
This file c ontains one or more sub sc riber rec ord s to b e mod ified . Eac h 
rec ord  c ontains a name, extension, and  c ommunity ID. You c an edit the 
outp ut of the getrlist
 c ommand  to g enerate inp ut to this c ommand . If 
you d on’t sp ec ify an inp ut file, you must typ e eac h name, extension, 
and  c ommunity ID d irec tly from your keyb oard  after entering  this 
c ommand . 
> 
ofileName of the file to whic h c ommand  statistic s will b e written.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-37 chgrcom 
13
Errors 
If either the name or extension d oes not b elong  to a valid system sub sc riber, an 
error message d isp lays. If more rec ord s exist, d atab ase mod ific ation c ontinue. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows:
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
CHANGE REMOTE COMMUNITY ID ROUTINE 
(
< ADAP version name>) 
name = _________; extension/text address = _______;
new community id = __; 
___: CHANGED COMMUNITY ID__________
Example 
The following command modifies one remote subscriber in the subscriber 
database. 
chgrcom -i 
Smith, David, 74101, 3 
The following data ap p ears on the sc reen: 
CHANGE REMOTE COMMUNITY ID ROUTINE 
(
< ADAP version name>)
Smith, David,74101,3
name = Smith, David; extension/text address = 74101; 
new community id = 3;
1:  CHANGED COMMUNITY ID 3 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1nameC29r1v5+D-r1.0+I-r2.0+
2extension/text ad d ressC64r1v5+D-r1.0+I-r2.0+
3new c ommunity idN2r1v5+D-r1.0+I-r2.0+
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-38 chgrext 
13
chgrext
Chang e remote sub sc rib er extensions 
Syntax 
chgrext
 [-r release] [-v
] [-w
] [-V
] [-i
] [<  ifile] [> ofile]
Description 
This c ommand  mod ifies remote sub sc rib er extensions in the c urrent d atab ase of 
the voic e mail system. 
Use the name, old  extension, and  new extension for eac h sub sc rib er as inp ut. 
Command statistic s are written to stand ard  output. 
-r
Release flag ; must b e followed  b y 
release. 
releaseSets d ata for the sp ec ified  release of the INTUITY , DEFINITY AUDIX or 
R1 AUDIX (R1V3 and  b eyond ) System software. For the DEFINITY 
AUDIX System, the d efault is D-r3.2. For the I
NTUITY AU D I X Sys t e m ,  
the d efault is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Unless -i
 is sp ec ified , p ressing  v
 while the c ommand is exec uting  
sends the upd ated  transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into the 
file, main.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and exits without 
transferring  any sc reens d ata. 
-i
Turns off the searc h for p ossib le sub seq uent entry of the v
 and  q
 
(q uit) op tions. Otherwise, if you typ e ahead , you may lose c harac ters. 
If you d on’t sp ec ify -i
, you must sp ec ify an input file (
< ifile) from 
whic h the names, extensions, etc ., will b e read . 
< 
ifileName of an inp ut file you have c reated . The filename must b e 
p rec ed ed  b y the symb ol < . 
This file c ontains one or more sub sc rib er rec ords to b e mod ified . 
Eac h rec ord  c ontains name, old  extension, and  new extension. You 
c an ed it the outp ut of the getrlist
 c ommand  to g enerate inp ut to this 
c ommand . If you d on’t sp ec ify an inp ut file, you must typ e eac h 
name, old  extension, and  new extension d irec tly from your keyb oard  
after entering  this c ommand. 
> 
ofileSp ec ifies the file to whic h c ommand  statistic s will b e written.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-39 chgrext 
13
Errors 
If either the name or old  extension d oesn’t b elong  to a valid  system sub sc rib er, 
an error messag e d isp lays. If more rec ord s exist, d atab ase mod ific ation 
c ontinues. Sinc e no d up lic ates for extensions are allowed , make sure you ord er 
the file c orrec tly. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows:
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
CHANGE REMOTE EXTENSION ROUTINE 
(
< ADAP version name>)
name = _________; extension = _______;
new extension = _________;
____: CHANGED EXTENSION__________
Example 
The following command modifies one remote subscriber in the subscriber 
database. 
chgrext -i 
Smith, Alice, 74101, 74229 
The following data ap p ears on the sc reen: 
CHANGE REMOTE EXTENSION ROUTINE 
(
< ADAP version name>)
Smith, Alice,74101,74299
name = Smith, Alice; extension = 74101; 
new extension = 74299;
1:  CHANGED EXT 74299 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1 name C 29 r1v3+ D-r1.0+ I-r2.0+
2 old extension K 10 r1v3+ D-r1.0+ I-r2.0+
3 new extension K 10 r1v3+ D-r1.0+ I-r2.0+
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-40 chgrmach 
13
chgrmach
Change remote subscriber machines 
Syntax 
chgrmach
 [-r release] [-v
] [-w
] [-V
] [-i
] [< ifile] [> ofile] 
Description 
This c ommand mod ifies the remote subsc rib er system (mac hine) (and op tionally 
the extension) in the c urrent d atab ase of the voic e mail system. Use the name, 
extension, mac hine, and  new extension as inp ut for eac h sub sc rib er. Command  
statistic s are written to stand ard  outp ut. 
-r
Release flag ; must b e followed  b y 
release. 
releaseSets d ata for the sp ec ified  release of the INTUITY AUDIX, DEFINITY 
AUDIX, or R1 AUDIX (R1V3 and  b eyond ) System software. For the 
DEFINITY AUDIX System, the d efault is D-r3.2. For the I
NTUITY 
AUDIX System, the d efault is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Unless -i
 is sp ec ified , p ressing  v
 while the c ommand is exec uting  
sends the upd ated  transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into 
the file, main.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and exits 
without transferring  any sc reens d ata. 
-i
Turns off the searc h for p ossib le sub seq uent entry of the v
 and  q
 
(q uit) op tions. Otherwise, if you typ e ahead , you may lose 
c harac ters. If you d on’t sp ec ify -i
, you must sp ec ify an inp ut file 
(
< ifile) from whic h the names, extensions, etc ., will b e read . 
< 
ifileName of an inp ut file you have c reated . The filename must b e 
p rec ed ed  b y the symb ol < . 
This file c ontains one or more sub sc rib er rec ords to b e mod ified . 
Eac h rec ord  c ontains a name, old  extension, mac hine, and  new 
extension. You c an ed it the output of the getrlist
 c ommand  to 
g enerate inp ut to this c ommand. If you don’t spec ify an inp ut file, 
you must typ e eac h name, old  extension, mac hine, and new 
extension d irec tly from your keyb oard  after entering  this c ommand . 
>
 
ofileName of the file to whic h c ommand  statistic s will b e written.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-41 chgrmach 
13
Errors 
If either the name or extension d oesn’t b elong to a valid system subsc riber, an 
error message d isp lays. If more rec ord s exist, d atab ase mod ific ation c ontinues. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows. The new extension portion of the inp ut is op tional. 
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
CHANGE REMOTE MACHINE ROUTINE 
(
< ADAP version name>)
name = ________; extension = ______; new machine = _____; 
new extension = _____;
____: CHANGED MACHINE__________
Example 
The following command modifies one remote subscriber in the subscriber 
database. 
chgrmach -i 
James, Jan, 74199, omaha,76199 
The following data ap p ears on the sc reen: 
CHANGE REMOTE MACHINE ROUTINE 
(
< ADAP version name>)
James, Jan,74199,omaha,76199
name = James, Jan; extension = 74199; new machine = omaha;
new extension = 76199;
 1:  CHANGED MACHINE omaha 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1 name C 29 r1v3+ D-r1.0+ I-r2.0+
2 extension K 10 r1v3+ D-r1.0+ I-r2.0+
3 new mac hine C 10 r1v3+ D-r1.0+ I-r2.0+
4 [ new extension] K 10 r1v3+ D-r1.0+ I-r2.0+
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-42 chgrnam 
13
chgrnam
Change remote subscriber names 
Syntax 
chgrnam
 [-r release] [-v
] [-w
] [-V
] [-i
] [< ifile] [> ofile] 
Description 
This c ommand  mod ifies remote sub sc riber names in the c urrent d atab ase of the 
voic e mail system. Use the name, extension, and  new name as inp ut for eac h 
sub sc rib er. Command  statistic s are written to standard  outp ut. 
-r
Release flag ; must b e followed  b y 
release. 
releaseSets d ata for the sp ec ified  release of the INTUITY AUDIX, DEFINITY 
AUDIX, or R1 AUDIX (R1V3 and  b eyond ) System software. For the 
DEFINITY AUDIX System, the d efault is D-r3.2. For the I
NTUITY 
AUDIX System, the d efault is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Unless -i
 is sp ec ified , p ressing  v
 while the c ommand  is exec uting  
send s the up d ated transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand  into the 
file, main.rc
. 
-V
Writes the ADAP version numb er for this c ommand and  exits without 
transferring  any sc reens data. 
-i
Turns off the searc h for p ossib le sub seq uent entry of the v
 and  q
 
(quit) options. Otherwise, if you typ e ahead , you may lose 
characters. 
If you d on’t sp ec ify -i
, you must sp ec ify an inp ut file (
<  ifile) from 
whic h the names, extensions, etc ., will b e read . 
< 
ifileName of an inp ut file you have c reated . The filename must be 
p rec ed ed by the symb ol < . 
This file c ontains one or more sub sc rib er rec ord s to b e mod ified . 
Eac h rec ord  c ontains a name, extension, and  new name. You c an 
ed it the outp ut of the getrlist
 c ommand  to g enerate inp ut to this 
c ommand . If you d on’t sp ec ify an inp ut file, you must typ e eac h 
name, extension, and  new name d irec tly from your keyb oard  after 
entering  this c ommand . 
> 
ofileName of the file to whic h c ommand statistic s will be written.  
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-43 chgrnam 
13
Errors 
If either the name or extension d oesn’t b elong to a valid system subsc riber, an 
error message d isp lays. If more rec ord s exist, d atab ase mod ific ation c ontinues. 
Input Format 
The Inp ut Format c onsists of one rec ord  for eac h sub sc rib er, formatted as 
follows:
Output Format
The Outp ut Format for eac h rec ord  c onsists of the c ommand  statistic s as follows:
CHANGE REMOTE SUBSCRIBER NAME ROUTINE 
(
< ADAP version name>)
name = _____________; extension/text address = ___________;
new name = ___________________; 
__: CHANGED NAME___________
Example 
The following command modifies one remote subscriber in the subscriber 
database. 
chgrnam -i 
Hobbs, Ellen,74199,Smith, Ellen 
The following data ap p ears on the sc reen: 
CHANGE REMOTE SUBSCRIBER NAME ROUTINE 
(
< ADAP version name>)
Hobbs, Ellen,74199,Smith, Ellen
name = Hobbs, Ellen; extension/text address = 74199;
new name = Smith, Ellen;
 1:  CHANGED NAME Smith, Ellen 
FIELD       VOICE MAIL VERSIONS
Seq. 
No. Field Name TypeMax.
WidthR1
AUDIX 
System 
DEFINITY
AUDIX 
SystemI
NTUITYAUDIX 
System
1 old name C 29 r1v3+ D-r1.0+ I-r2.0+
2 extension/text ad d ress C 64 r1v3+ D-r1.0+ I-r2.0+
3 new name C 29 r1v3+ D-r1.0+ I-r2.0+
RETU RN
RETU RN
NEWLINE 
						

							AUDIX Administration and Data Acquisition Package  585-302-502  Issue 14
May 1999
Command Line Database Modification Commands 
13-44 delrsub 
13
delrsub
Delete remote sub sc ribers 
Syntax 
delrsub
 [-r release] [-v
] [-w
] [-V
] [-i
] [<  ifile] [> ofile]
Description 
This c ommand  d eletes remote sub sc rib ers from the c urrent d atab ase of the 
voic e mail system. Use the name and  extension as inp ut for eac h sub sc rib er. 
Command statistic s are written to stand ard  output. 
-r
Release flag ; must b e followed  b y 
release. 
releaseDeletes d ata for the spec ified release of the INTUITY AUDIX, 
DEFINITY AUDIX, or R1 AUDIX (R1V3 and  beyond ) System 
software. For the DEFINITY AUDIX System, the d efault is D-r3.2. For 
the I
NTUITY AUDIX System, the d efault is I-r5.0. 
-v
Writes transfer statistic s to the sc reen at the end  of the transfer. 
Pressing  v
 while the c ommand  is exec uting  send s the up d ated  
transfer status to the sc reen. 
-w
Writes a one-line summary of the exit status of this c ommand into the 
file, main.rc
. 
-V
Writes the ADAP version numb er for this c ommand  and exits without 
transferring  any sc reens d ata. 
-i
Turns off the searc h for p ossib le sub seq uent entry of the v
 and  q
 
(q uit) op tions. Otherwise, if you typ e ahead , you may lose 
c harac ters. 
If you d on’t sp ec ify -i
, you must sp ec ify an input file (
< ifile) from 
whic h the names, extensions, etc ., will b e read . 
< 
ifileName of an inp ut file you have c reated . The filename must b e 
p rec ed ed  b y the symb ol < . 
This file c ontains one or more sub sc rib er rec ords to b e d eleted . 
Eac h rec ord  c ontains a name and  extension. You c an use the outp ut 
of the getlist
 c ommand  as a starting  p oint for inp ut to this 
c ommand . If you d on’t sp ec ify an inp ut file, you must typ e eac h 
name and  extension d irec tly from your keyb oard  after entering this 
c ommand . 
> 
ofileName of the file to whic h c ommand  statistic s will b e written.