Kyocera TASKalfa 250ci User Manual

							Management 
OPERATION GUIDE11-9
11
Unknown login user name Job 
This specifies the behavior for handling the jobs sent with unknown login user names or User ID (i.e. unsent 
IDs). If the User Login is set to invalid and Job Accounting is set to valid, follow the procedure when the Account 
ID is unknown.
The table below shows the available settings.
Use the procedure below to proce ss jobs sent from unknown users.
1Press the System Menu  key. 
2Press [User Login/Job Accounting].
3If user login administration is disabled, the user 
authentication screen app ears. Enter your login 
user name and password and then press [Login]. 
For this, you need to login with administrator 
privileges. Refer to  Adding a User on page 11-4  for 
the default login user name and password.
4Press [Change] of  Unknown ID Job.
5Press [Reject] or [Permit]. 
6Press [OK].
Item
Description
Reject The job is rejected (not printed).
Permit The job is permitted to be printed. 
Downloaded From ManualsPrinter.com Manuals 
						

							Management 
11-10OPERATION GUIDE
Group Authorization Settings
Set restrictions of the machine usage by each individual group registered in the authentication server.
NOTE: To use the group authorization settings, [Network Authentication] must be selected for the 
authentication method in  Enabling/Disabling User Login Administration on page 11-2 .  Select [On] for LDAP in 
Protocol Detail on page 8-92.
Group Authorization
Use the group authorization. Use the procedure below.
1Press the  System Menu  key. 
2Press [User Login/Job Accounting].
3If user login administration is disabled, the user 
authentication screen app ears. Enter your login 
user name and password and then press [Login]. 
For this, you need to login with administrator 
privileges. Refer to  Adding a User on page 11-4  for 
the default login user name and password.
4Press [Next] of  User Login Setting, [Next] of  Group 
Authorization Set. , and then [Change] of  Group 
Authorization .
5Press [On]. 
6Press [OK].
Group List
Register the groups that is restricted the machine us age. Up to 20 groups can be individually registered.
Other users and groups belong to  Others.
The table below explains the group information to be registered.
Item Description
Group ID* Enter the ID displayed on the group list (between 1  and 4294967295).
Group ID Name Enter the name displayed on the group list (up to  32 characters).
Access Level Select Administrator or User for group access  privileges.
Print Restriction Select whether or not to reject usage of  print  functions for the printer.
Print Restriction 
(Color) Select whether or not to reject usage of the color 
print functions for the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							Management 
OPERATION GUIDE11-11
11
Use the procedure below.
1Press the System Menu  key. 
2Press [User Login/Job Accounting].
3If user login administration is disabled, the user 
authentication screen app ears. Enter your login 
user name and password and then press [Login]. 
For this, you need to login with administrator 
privileges. Refer to  Adding a User on page 11-4  for 
the default login user name and password.
4Press [Next] of  User Login Setting, [Next] of  Group 
Authorization Set. , [Change] of Group List, and 
then [Add].
Copy Restriction Select whether or
 not to reject usage of copy 
functions.
Copy Restr. 
(Color) Select whether or not to reject usage of the color 
copy functions.
Copy Restriction 
(Full Color) Select whether or not to reject usage of only the full 
color copy functions.
Send Restriction Select whether or not to reject usage of the send  functions.
FA X  T X  
Restriction Select whether or not to reject usage of the FAX 
transmissions.
Storing Restr. 
in Box Select whether or not to reject usage of storing in 
the document boxes.
Storing Restr. in 
Memory Select whether or not to reject usage of storing in 
the removable memory.
* For Group ID, specify PrimaryGroupID assigned by ActiveDirectory 
of Windows. If you are using Windo ws Server 2008, check Attribute 
Editor tab of user properties. If you are using Windows Server 2000/
2003, check ADSIEdit. ADSIEdit is a support tool included on the 
installation CD-ROM for Windows Server OS (under 
\SUPPORT\TOOLS).
Item Description
User Login/Job Accounting - Group List
Register the groups that is restricted the machine usage. (Maximum: 20)
Group ID Group Name
Detail Delete Add
Register
2008/10/10    10:10
StatusCancel
Others
Downloaded From ManualsPrinter.com Manuals 
						

							Management 
11-12OPERATION GUIDE
5Press [Change] of Group ID. 
6Enter the group ID and press [OK].
7Press [Change] of  Group Name.
8Enter the group name and press [OK].
NOTE: Refer to the Character Entry Method on 
Appendix-7 for details on entering characters.
9Press [Change] of  Access Level.
10Select the user access privilege and press [OK].
11Press [Change] of  Print Restr. (B & W) .
12Select [Reject Usage] or [Off] and press [OK].
13Follow steps 11 and 12 above to set  Print Restr. 
(Full Color) , Copy Restr. (B & W) , Copy Restr. 
(SingleColor) , Copy Restr. (Full Color) , Send 
Restriction , FAX TX Restriction , Storing Restr. in 
Box , and  Storing Restr. in Memory .
14Press [Register] to add a new group on the group 
list.
Obtain Network User Property
Set the required information to obtain the network user property from the LDAP server.
NOTE: To obtain the network user property from the LDAP  server, [Network Authentication] must be selected 
for the authentication method in Enabling/Disabling User Login Administration on page 11-2 .
The table below explains the required information to be registered.Use the procedure below.
Group:xxx
Group ID:
Copy Restriction:
Access Level:
Register
Copy Restriction (Color):
Print Restriction:
Print Restriction (Color):
Cancel
Change
Group Name:
2008/10/10    10:10
Status
Change Change Change
Copy Restr. (Full Color):
Change
Change
Change
Change
Send Restriction: Change
1/2
ItemDescription
Server Name*
1Enter the LDAP server name or the  IP address (up to 64 characters).
Port Set the LDAP port number or use the default port 389.
Name 1*
2Enter the LDAP Attribute to obtain the  user name to be displayed from the 
LDAP server (up to 32 characters).
Name 2*
3Enter the LDAP Attribute to obtain the  user name to be displayed from the 
LDAP server (up to 32 characters).
E-mail Address*
4Enter the LDAP Attribute to obtain the e-mail address from the LDAP server (up 
to 32 characters).
Search Timeout Set the amount of time to wait before time-out in seconds (from 5 to 255  seconds).
Downloaded From ManualsPrinter.com Manuals 
						

							Management 
OPERATION GUIDE11-13
11
*1  If using Active Directory of Windows, the server name may be same as  the server name entered in the 
network authentication.
*2  If using Active Directory of Windows,  displayName of Attribute may be used as Name 1.
*3  Name 2  can be left out. When you assign  displayName in Name 1  and department  in Name 2 , and if the 
value of  displayName is Mike Smith and the value of  department is Sales in Active Directory of Windows, 
the user name appears as Mike Smith Sales .
*4  If using Active Directory of Windows,  mail of Attribute may be used as E-mail Address .
1Press the System Menu  key.
2Press [User Login/Job Accounting].
3If user login administration is disabled, the user 
authentication screen app ears. Enter your login 
user name and password and then press [Login]. 
For this, you need to login with administrator 
privileges. Refer to  Adding a User on page 11-4  for 
the default login user name and password.
4Press [Next] of  User Login Setting , [Change] of 
Obtain NW User Property .
5Press [On].
6Press [Server Name].
7Enter the LDAP server name or the IP address and 
press [OK].
8Press [# keys] to enter the LDAP port number using 
the numeric keys.
9Press [Name 1].
10Enter the LDAP Attribute to obtain the user name to 
be displayed and press [OK].
11Follow steps 9 and 10 above to set  Name 2.
12Press [E-mail Address].
13Enter the LDAP Attribute to obtain the e-mail 
address and press [OK].
14Press [Search Timeout] to set the amount of time to 
wait before time-out.
15Press [+], [-] or the nume ric keys to enter the time.
LDAP Security Select the type of 
encryption according to the type of security employed by the 
LDAP server.
Item
Description
User Login/Job Accounting - Network User Property
Get the network user information.
On Off
Cancel OK
Server Name
Search
Timeout
LDAP
Security
#Keys
Name 2 Name 1
10/10/2008    10:10
Status
E-mail Address
LDAP Server Information:
Port:
Acquisition of User Information: displayName
mail 192.181.11.11
389
30
Off sec.
Downloaded From ManualsPrinter.com Manuals 
						

							Management 
11-14OPERATION GUIDE
16Press [LDAP Security] to select the type of 
encryption according to the type of security 
employed by the LDAP server.
17Select [Off], [LDAP over SSL], or [LDAPv3/TLS] 
and press [OK].
Downloaded From ManualsPrinter.com Manuals 
						

							Management 
OPERATION GUIDE11-15
11
Job Accounting
Job accounting Manages the copy/print count accumulated by individual accounts by assigning an ID to each 
account. 
Job accounting helps the following activities in business organizations.
• Manageability of up to  1,000 individual accounts.
• Availability for account IDs with as many as eight digits (between 0 and  99999999) for security. 
• Integrated management of printing and scanning stat istics through the use of an identical account ID. 
• Tracking the print volume for each account and for all accounts combined.
• Restricting the print counter in one-page increments up to 9,999,999 copies. 
• Resetting the print counter for each account or for all accounts combined. 
First Job Accounting Setup 
Follow these steps for the first job accounting setup. 
Enable job accounting. ( page 11-15)

Add an account. ( page 11-17)

Log out. ( page 11-16 )

Other users login for operations. ( page 11-16)
Enabling/Disabling Job Accounting 
Enable job accounting. Use the procedure below to specify the job accounting setting.
1Press the System Menu  key. 
2Press [User Login/Job Accounting].
3If user login administration is disabled, the user 
authentication screen app ears. Enter your login 
user name and password and then press [Login]. 
For this, you need to login with administrator 
privileges. Refer to  Adding a User on page 11-4  for 
the default login user name and password.
4Press [Next] of  Job Accounting Setting , and then 
[Change] of  Job Accounting.
5Press [On]. To disable job accounting, press [Off].
Downloaded From ManualsPrinter.com Manuals 
						

							Management 
11-16OPERATION GUIDE
6Press [OK].
NOTE: When the display returns to the System Menu 
default screen, logout is automatically executed and 
the screen to enter the Account ID appears. To 
continue the operation, enter the Account ID.
Login/Logout
If job accounting is enabled, an account ID entry screen appears each time you use this machine. 
Use the procedure below to login and logout.
Login
1In the screen below, enter the account ID using the 
numeric keys and press [Login].
NOTE: If you entered a wrong character, press the 
Clear key and enter the account ID again. 
If the entered account ID does not match the registered 
ID, a warning beep will sound  and login will fail. Enter 
the correct account ID. 
By pressing [Counter Check], you can refer to the 
number of pages printed and the number of pages 
scanned.
When the screen to enter the login user name and 
password appears
If user login administration is enabled, the screen to 
enter the login user name and password appears. Enter 
a login user name and password to login. (Refer to 
Login/Logout on page 11-3 .) If the user has already 
registered the account information, the account ID entry 
would be skipped. (Refer to  Adding a User on page 11-
4 .) 
2Proceed to complete the rest of the steps.
Logout When the operations are complete, press the Logout 
key to return to the a ccount ID entry screen.
Status 10/10/2008    10:10
Enter the account ID.
********
Check Counter Login
Downloaded From ManualsPrinter.com Manuals 
						

							Management 
OPERATION GUIDE11-17
11
Adding an Account
This section explains how to add a new account. The following entries are required.
Use the procedure below to register a new account.
1Press the System Menu  key. 
2Press [User Login/Job Accounting].
3If user login administration is disabled, the user 
authentication screen app ears. Enter your login 
user name and password and then press [Login]. 
For this, you need to login with administrator 
privileges. Refer to  Adding a User on page 11-4  for 
the default login user name and password.
4Press [Next] of  Job Accounting Setting , [Register/
Edit] of  Accounting List , and then [Add].
5Press [Change] of  Account Name.
6Enter the account name and press [OK]. The 
Account screen reappears.
NOTE: Refer to the Character Entry Method on 
Appendix-7 for details on entering characters.
7Follow steps 5 and 6 above to enter the  Account ID. 
Item
Description
Account Name Enter the account name (up to 32 characters).
Account ID Enter the account ID as many as eight digits  (between 0 and 99999999). 
Restriction This Prohibits printi ng/scanning or restricts the 
number of sheets to load. Refer to  Restricting the 
Use of the Machine on page 11-20 .
Account: xx 
Print Restriction (Total):
Copy Restriction (Total):
Register
Copy Restr. (Full Color): Account ID:
Cancel
Off
Off
Off 00001000
Print Restr. (Full Color):Off
Account Name:
Change
10/10/2008    10:10
Status
Copy Restr. (SingleColor):
Off Change Change
Change Change Change Change
1/2
01 Account
Downloaded From ManualsPrinter.com Manuals 
						

							Management 
11-18OPERATION GUIDE
NOTE: Any account ID that has already registered 
cannot be used. Enter any other account ID.
8Activate or deactivate restriction. Refer to 
Restricting the Use of the Machine on page 11-20.
9Press [Register] to add a new account on the 
Account List.
Managing Accounts
This changes the registered account information or deletes the account.
Use the procedure below to manage accounts.
1Press the System Menu  key. 
2Press [User Login/Job Accounting].
3If user login administration is disabled, the user 
authentication screen app ears. Enter your login 
user name and password and then press [Login]. 
For this, you need to login with administrator 
privileges. Refer to  Adding a User on page 11-4  for 
the default login user name and password.
4Press [Next] of  Job Accounting Setting  and then 
[Register/Edit] of  Accounting List.
5Select an account to change or delete.
NOTE: Select [Name] or [ID] from the  Sort pull-down 
menu to sort the account names.
Press [Search(Name)] or [Search(ID)] to search by 
account name or account ID.
The procedure differs depending on the details to 
be edited.
User Login/Job Accounting - Accounting List
1/2
Register an account that is permitted to use this machine. (Maximum: 1000)
Search(Name)
Search(ID)
Account Name
Account ID
Detail Name
Sort
01
02
03
04
05 00001000
00002000
00005000 00003000
00004000
Delete Add
Close
10/10/2008    10:10
Status
Account
Account
Account
Account
Account
Downloaded From ManualsPrinter.com Manuals