Kyocera TASKalfa 250ci User Manual

							Copying Functions 
OPERATION GUIDE4-15
4
Single Color Copy
Specify one of Cyan, Magenta, Yellow, Red, Green, or Blue, and produce copies with that color regardless of 
original type.
Follow the steps as below for Single Color Copy.
1Press  Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality], [Color Selection] and 
then press [Single Color].
4Select color for copying from [Cyan], [Magenta], 
[Yellow], [Red], [Green] or [Blue].
5Press [OK].
6Press the  Start key. Copying begins.
Color Selection
Ready to copy.Copies1
Status 10/10/2008    10:10Cancel
OK
Add Shortcut Auto Color
Preview
Original
Zoom
Paper
100%
---
:
:
: ---
Place original.
Single Color Black &
White Full ColorCyan Yellow
Magenta
Red Blue
Green
Single Color
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-16OPERATION GUIDE
Color Balance Adjust
Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see  page 3-14).
This feature can not be used togethe r with One touch Image Adjust (see page 4-19).
Refer to the sample image in  Quick Guide to Adjusting Image Quality.
Follow the steps below to  adjust color balance.
1Press Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press [Color 
Balance].
4Press [On].
5Press [ ] or [ ] on each side of the color to be 
adjusted ( Cyan, Magenta , Yellow , Black ) to adjust 
each color.
6Press [OK].
7Press the  Start key. Copying begins.
Color Balance
Ready to copy.Copies
Status 10/10/2008    10:10CancelOK
Add Shortcut Off
Preview
Original
Zoom
Paper
100%
---
:
:
: --- On
Cyan
Magenta
Yellow
Black-5
-1-2-3-4 5
43210
-5 -1-2-3-4 5
43210
-5 -1-2-3-4 5
43210
-5 -1-2-3-4 5
43210
Place original.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
OPERATION GUIDE4-17
4
Hue Adjustment
Adjust the color (hue) of images. Make adjustments such as adjusting red to a strong yellow-red or yellow to a 
strong green-yellow to make more creative copies.
The items that may be configured are as follows.
•All: Adjust hue for all colors.
• Yellow - Green & Blue - Magenta : Adjust color 
balance for yellow and green, and blue and 
magenta.
• Green - Cyan & Magenta - Red : Adjust color 
balance for green and cyan, and magenta and red.
• Cyan - Blue & Red - Yellow : Adjust color balance 
for cyan and blue, and red and yellow.
NOTE: This feature is used  with full color copying.
This feature can not be used together with Adjusting 
Density (see  page 3-14).
This feature can not be used together with One touch 
Image Adjust mode (see  page 4-19).
These adjustments are especially useful on rich color 
images.
Follow the steps below to use image hue adjustment.
1Press  Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press [Hue 
Adjustment].
4Select the item for which the hue is to be adjusted 
and then press [ ] or [ ] to make the adjustment.
Yellow
Green
Blue
Red
Magenta Cyan
Hue Adjustment
Ready to copy.Copies
Status 10/10/2008    10:10CancelOK
Add Shortcut Off
Preview
Original
Zoom
Paper
100%
---
:
:
: ---
Place original.
Green - Cyan
& Magenta - Red Yellow - Green
& Blue - Magenta All
Cyan - Blue
& Red - Yellow Green
Red
Cyan
Blue
Adjust hue for all colors.
Yellow
Magenta
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-18OPERATION GUIDE
Example 1
Select [Yellow - Green & Blue - Magenta], and 
press [ ] to adjust yellow closer to green, and blue 
closer to magenta.
Example 2
Select [Cyan - Blue & Re
d - Yellow], and press [ ] 
to adjust yellow closer to red , and blue closer to 
cyan.
5Press [OK].
6Press the  Start key. Copying begins.
Yellow
Green
Blue
Red
Magenta Cyan
Yellow
Green
Blue
Red
Magenta Cyan
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
OPERATION GUIDE4-19
4
One-touch Image Adjust
Adjust images as desired to more vivid or more dull images.
The items that may be configured are as follows: Vivid, Dull,  Sharp, Smooth , Light , Dark
Refer to the sample image in Quick Guide to Adju sting Image Quality for examples of the effect of each setting.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see  page 3-14).
This feature can not be used togethe r with Color Balance Adjust (see page 4-16).
Select from one of the 6 available One Touch Image Adjust types. Multiple selections are not possible.
Follow the steps below to use One-touch Image Adjust.
1Press Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press [One-
touch Image Adjust].
4Select the image.
5Press [OK].
6Press the  Start key. Copying begins.
One-touch Image Adjust
Ready to copy.Copies
Status 10/10/2008    10:10CancelOK
Add Shortcut Adjust images as desired.
Preview
Original
Zoom
Paper
100%
---
:
:
: --- Off
Vivid
SmoothDull
Sharp
Light Dark
Place original.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-20OPERATION GUIDE
Sharpness Adjust
Adjust the sharpness of image outlines. When copying penciled originals with rough or broken lines, clear copies 
can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned dots such 
as magazine phots, in which moire
† patterns appear, edge softening and weakening of the moire effect can be 
obtained by setting the sharpness toward [Unsharpen].
Refer to the sample image in  Quick Guide to Adjusting Image Quality.
Follow the steps below to adjust sharpness.
1Press  Copy key.
2Place the originals on the platen.
3Press [Color/Image Qua lity] and then Press 
[Sharpness].
4Press [-3] to [3] (Unsharpen - Sharpen ) to adjust 
the sharpness.
5Press [OK].
6Press the  Start key. Copying begins.
†Patterns that are created by irregu lar distribution of halftone dots.
Sharpness
Ready to copy.Copies
Status 10/10/2008    10:10Cancel
OK
Add Shortcut
Preview
Original
Zoom
Paper
100%
---
:
:
: --- Sharpen
Unsharpen
0+1 +2 +3
-1
-2
-3
Place original.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
OPERATION GUIDE4-21
4
Background Density Adjust
Lightens the background of color originals with dark 
backgrounds.
NOTE: This feature is used with full color and auto 
color copying. Background Density Adjust is disabled 
during auto color copying when the a black & white 
original has been detected.
Follow the steps below to use background density adjust.
1Press  Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press 
[Background Density Adj.].
4Press [On].
5Press [1] to [5] ( Lighter - Darker)  to  adjust the 
background color intensity.
6Press [OK].
7Press the  Start key. Copying begins.
Original Copy 
Background Density Adj.
Ready to copy.Copies
Status 10/10/2008    10:10CancelOK
Add Shortcut
Preview
Original
Zoom
Paper
100%
---
:
:
: --- On Off
Background
Lighter Darker
123 45
Place original.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-22OPERATION GUIDE
Combine Mode
This mode allows you to copy 2 or 4 originals combined onto a single page. 2-in-1 mode or 4-in-1 mode. The 
page boundary of each original can be indicated.
NOTE: Combine mode is available for the copy paper sizes of A3, B4, Folio, A4, A4-R, B5, B5-R, A5-R, 
Ledger, Legal, Oficio II, 8.5×13.5, Letter, Letter-R, Statement-R, 8K, 16K and 16K-R.
2-in-1 Mode
For copying two originals onto a single sheet. This mode  can be used with Duplex mode to copy four originals 
onto one sheet.
The following 2-in-1 options and output orientations are available.
NOTE: When placing the original on the platen, be sure to copy the originals in page order.
Original
Document processor
Platen Orientation of Original
Copy
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
OPERATION GUIDE4-23
4
4-in-1 Mode
For copying four originals onto a single sheet. This mode can be used with Duplex mode to copy eight originals 
onto one sheet.
The following 4-in-1 options and output orientations are available.
NOTE: When placing the original on the platen, be sure to copy the originals in page order.
Types of Page Boundary Lines
The following types of the boundary lines are available.
The procedure for using Combine mode copying is explained below.
1Press the  Copy key.
2Place the originals on the platen.
Original
Document processor
Platen Orientation of Original
Copy
None Dotted
Solid Borders
(Cropmark) 
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-24OPERATION GUIDE
3Press [Layout/Edit] and then [Combine].
4Press [2 in 1] or [4 in 1], and choose the page layout 
of Layout.
5Press [Border Line] to choose the type of the lines 
to indicate page boundaries. Press [OK].
6Press [Original Orientation] to choose orientation of 
the originals, either [Top Edge Top] or [Top Edge 
Left]. Then press [OK].
7Press [OK].
8Press the Start key. Copying begins.
If the original is placed on the platen, replace the 
original and press the  Start key.
After scanning all originals, press [Finish Scan] to 
start copying.
Status 10/10/2008    10:10
Ready to copy.Copies
Cancel OK
Combine
Add Shortcut Layout
4 in 1 2 in 1 Left then
Down
Original
Orientation
Off
Border Line
Down then
Right Down then
Left
Right then
Down
Original :
:
:
Zoom
Paper
Preview---
--- 100%
Place original.
Top Edge Top None
Downloaded From ManualsPrinter.com Manuals