Kyocera TASKalfa 250ci User Manual

							Copying Functions 
OPERATION GUIDE4-35
4
8If you do not want page numbering through to the 
last page, press [Last Page]. Select Manual and 
use [+] or [-] to enter the final page to be numbered 
(a negative number of pages counting backwards 
from the last page). Then press [OK]. You can set a 
value up to -10. You can also enter the number with 
the numeric keys afte r pressing [# Keys].
9The total number of pages  n in the format [1/n] can 
be changed manually. Press [Denominator #] and 
select [Manual]. Press [+] or [–] to enter the total 
number of pages and press [OK]. You can also 
enter the number with the numeric keys after 
pressing [# Keys].
10Press [Original Orientation] to choose orientation of 
the originals, either [Top Edge Top] or [Top Edge 
Left]. Press [OK].
11Press [OK].
12Press the  Start key to start copying.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-36OPERATION GUIDE
Memo Mode
Delivers copies with a space for adding notes. You can also copy two originals onto the same sheet with a space 
or add lines to indicate page boundaries.
NOTE: Memo mode is available for the copy paper sizes of Ledger, Legal, Oficio II, 8.5×13.5, Letter, Letter-R, 
Statement-R, A3, B4, Folio, A4, A4-R, B5, B5-R, A5-R, 8K, 16K and 16K-R.
Layout A
Reduces images of each original page for printing onto 
half of a page, leaving the other half blank for notes.
Layout B
Reduces images of two original pages for copying onto 
half of a single page, leaving the other half blank for 
notes.
OriginalCopy
OriginalCopy
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
OPERATION GUIDE4-37
4
Types of Page Boundary Lines
The following boundary lines are available.
Use the procedure below to insert page boundary lines on your copies.
1Press the Copy key.
2Place the originals on the platen.
3Press [Layout/Edit] and then [Memo Page].
4Press [Layout A] or [Layout B]. Select the page 
layout from  Layout.
5Press [Border Line] to select the page boundary 
line. Press [OK].
6Press [Original Orientation] to select orientation of 
the originals, either [Top Edge Top] or [Top Edge 
Left]. Press [OK].
7Press [OK].
8Press the  Start key to start copying.
None Dotted
Solid Borders
(Cropmark) 
Status 10/10/2008    10:10
Ready to copy.Copies
Cancel OK
Memo Page
Add Shortcut Off
Layout B
Original
Orientation
Layout A
Border Line
Top
R to L
Top
R to B
Top
L to B Top
L to R
Layout
Preview
:
:
:
Original
Zoom
Paper ---
--- 100%
Place original.
None
Top Edge Top
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-38OPERATION GUIDE
Poster
For using this device to make copies larger than the 
maximum paper size, use Poster mode to separate and 
copy an enlarged image onto multiple pages.
The completed copies have overlapping areas. A single 
large page can be created by pasting those areas 
together.
Choose from one of the following 3 enlargement 
settings.
• Copy size – The output paper size is chosen from 
the following sizes. Copy  is enlarged according to 
the selected paper size.
• Zoom prioirty  – Specify the output zoom size from 
100 to 400%. Image will be output on the necessary 
number of copies for the specified zoom size.
• Number of sheets  – Select number of sheets to 
split the image from 2, 4, or 8 sheets. Copy is 
enlarged according to the selected number of 
pages.
NOTE: The available original sizes are 11 × 17, 
8
1/2 ×  11, A3 and A4R. The available paper sizes 
are 11 × 17 and A3 only.
Follow the steps as below to use poster enlargement.
1Press  Copy key.
2Place the originals on the platen.
3Press [Layout/Edit] and then press [Poster].
Original Copy 
Model Type Paper size
Inch models 34 × 44, 22 × 34, 17 × 22
Metric models A0, A1, A2
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
OPERATION GUIDE4-39
4
4Select enlargement method.
If [Copy Size] is selected, set the output paper size.
If [Zoom Priority] is selected, set the output zoom 
size.
If [Number of Sheets] is selected, set the number of 
split pages.
5Press [OK].
6Press the  Start key. Copying begins.
Poster
Ready to copy.Copies
Status 10/10/2008    10:10CancelOK
Add Shortcut Off
Preview
Original
Zoom
Paper
100%
---
:
:
: ---
Place original.
Copy Size
Zoom
PrioritySeparate and copy an image suitable for
the selected copy size.
17x22"
22x34"
34x44"
Number of
Sheets
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-40OPERATION GUIDE
Image Repeat/Double Copy
Tiles the 1 copied sheet with an original image. You can 
also specify the area of the original to repeat.
Image Repeat Copies the original image multiple times onto 1 sheet at 
a specified magnification.
You can also specify how much of the original is 
repeatedly copied.
Double Copy Makes 2 copies of the same original on a single sheet.
For example, you can double-copy an A4 original onto 
an A3 sheet which you then cut in half to make 2 copies 
that are identical to the original.
Follow the steps as below to use Image Repeat/Double Copy.
1Press  Copy key.
2Place the originals on the platen.
3Press [Layout/Edit] and then press [Image Repeat].
4Press [Zoom Priority].
To make double copies, press [Double Copy] and 
proceed to step 8.
5Press [+] or [–] to set the zoom size.
Press [# Keys] to enter with numeric keys.
6To set the area of the original to be repeated, press 
[On] for  Specify Repeat Area.
Original Copy 
OriginalCopy 
Image Repeat
Ready to copy.Copies1
Status
10/10/2008    10:10CancelOK
Add Shortcut Off
Preview
Original
Zoom
Paper
100%
---
:
:
: --- Zoom
Priority
100
# Keys
Double
Copy (25 - 400)
%
OffSpecify
Repeat Area
Place original.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
OPERATION GUIDE4-41
4
7Press [+] or [–] to input the area of the original to be 
repeated.
With metric models, you can enter the border width 
directly using the numeric keys after pressing [#-
Keys].
Y1: Length from top left of platen to top edge of 
repeat area
X1 : Length from Height from top left of platen to left 
edge of repeat area
Y2 : Height of repeat area
X2 : Width of repeat area
8Press [OK].
9Press the  Start key. Copying begins.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-42OPERATION GUIDE
Continuous Scan
When a large number of originals cannot be placed in the document processor at one time, the originals can be 
scanned in separate batches and then copied as one jo b. With this function, originals are scanned until you 
press [Scan Finish].
Any of the following settings can be changed during scanning.
• Original size selection
• Original orientation
• Image quality selection
• Type of original (2-sided/book original)
•Zoom
• Border erase
•Density
• Color Selection
If you use Job Build, you can insert a blank paper duri ng scanning or a blank page during duplex copying.
The procedure for making copies using Continuous Scan is explained below.
1Press the  Copy key.
2Press [Advanced Setup] and then [Continuous 
Scan].
3If Continuous Scan is selected, press [On].
If Job Build is selected, press [Job Build] and select 
desired binding orientation.
4Press [OK].
5Place the originals in the document processor or on 
the platen and press the  Start key.
If [Job Build] is selected, the next page can be 
changed. Press [Sheet Insertion] to insert a blank 
paper. Press [Next Copy: On Back] in duplex 
copying to print the next page on back page.
Status 10/10/2008    10:10
Ready to copy.Copies
Cancel OK
Continuous Scan
Add Shortcut Job Build On
Off
Select desired binding orientation.
Binding
Right Binding
Top
Binding
Left
:
:
:
Original
Zoom
Paper ---
--- 100%
Preview
Place original.
Status
10/10/2008    10:10
Copies
Cancel Finish Scan
Scanner Setting
Original
Size Original
Orientation Original
Image
2-sided/Book
Original Zoom
Border Erase
Density
1
Next Copy: On Front
Sheet
Insertion Next Copy:
On Back
Finishing
pages
Scan next original(s).
Place the originals and press Start key.
Press [Finish Scan] to start copying.
Job No.:   Job Name:   User Name:  
000021
doc20080505113414 -----
1/2
:ˆ:‰
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
OPERATION GUIDE4-43
4
6Place the next original and press the Start key. 
Repeat these steps to scan the remaining originals.
After scanning all originals, press [Finish Scan] to 
start copying.
Downloaded From ManualsPrinter.com Manuals 
						

							Copying Functions 
4-44OPERATION GUIDE
Auto Image Rotation
Automatically rotates the image when the sizes of the original and the loaded paper matches but the orientations 
are different. The images will be rotated 90 ° counter-clockwise prior to copying.
NOTE: To set Auto Image Rotation as the default mode, refer to Auto Image Rotation on page 8-28 .
The procedure for making copies using Auto Image Rotation is explained below.
1Press the  Copy key.
2Place the originals on the platen.
3Press [Advanced Setup] and then [Auto Image 
Rotation].
4Press [On] to select  Auto Image Rotation.
5Press [OK].
6Press the Start key to start copying.
Downloaded From ManualsPrinter.com Manuals