Home > GE > Ultrasound System > GE Logiq P5 User Manual

GE Logiq P5 User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual GE Logiq P5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 GE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 878
    Add page 691 to Favourites
    image text
    Enable zoom 
    							System Presets
LOGIQ 5 Basic User Manual 16-31
Direction 2300002-100 Rev. 2
Restore procedure: user-defined configurations
1.  Insert the MOD (Magneto-Optical Disk) with the user-
defined configurations into the MOD drive
2.  On the Touch Panel, press Utility.
3.  On the Utility Touch Panel, press System.
4.  On the monitor display, select Backup/Restore.
The Backup/Restore screen is displayed. See Figure 16-16.
NOTE:  If you are not logged in with administrator privileges, the 
Operator Login window is displayed. Log on with 
administrator privileges.
5.  In the Restore list, select from the following, depending on 
which configurations you want to restore:
•  User Defined Configuration, 
OR, in the Detailed Restore section select one of the 
following: 
• Imaging Presets
• Connectivity Configuration
• Measurement Configuration
• Comment/Body Pattern Configuration
• All Others
6.  In the Media field, select the system and user-defined 
configurations MOD.
7. Select Restore.
The system performs the restore. As it proceeds, status 
information is displayed on the System/Backup/Restore 
screen.
CAUTIONThe restore procedure overwrites the existing database on the 
local hard drive. Make sure to insert the correct MOD.
CAUTIONTo avoid the risk of overwriting the local patient and report 
archives, DO NOT check Patient Archive when restoring user-
defined configurations.
    Add page 692 to Favourites
    image text
    Enable zoom 
    							Customizing Your System
16-32 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
System/Peripherals Preset Menu
The System/Peripherals screen allows you to specify video and 
system setup parameters.
 Figure 16-17. System/Peripherals Preset Menu 
Table 16-17: Video Settings 
Preset ParameterDescription
Format Select the video format, PAL or NTSC.
Mixed Mode Allows you to select the PAL format, but still operate 
the color printer in NTSC mode. This setting has no 
effect on NTSC mode. 
Table 16-18: VCR
Preset ParameterDescription
VCR Select the type of VCR, or no VCR.
    Add page 693 to Favourites
    image text
    Enable zoom 
    							System Presets
LOGIQ 5 Basic User Manual 16-33
Direction 2300002-100 Rev. 2
System/Peripherals Preset Menu (continued)
Table 16-19: Print and Store Options
Preset ParameterDescription
Set Preview Size to 
Video AreaSelect to set capture image area as the entire video 
area -- desired format for DICOM prints. 
Dicom Store with 
Title BarCheck box to select. 
Store Dual as Dicom 
OnlySelect to always store dual images as a DICOM 
(secondary capture) store, rather than Raw 
DICOM. 
Store Multiframe for 
Sec Capture LoopsSelect this if you want the CINE loop stored as 
secondary capture. 
Review Screen: View 
Images as Raw DataCheck box to select. 
Enable Smart 
Capture AreaCheck box to select. 
Table 16-20: Setup 
Preset ParameterDescription
Default Printer If you have an additional standard printer set up via 
the USB serial port, select it here. 
Printer Press this key to add an additional standard printer 
via the USB serial port and to configure digital 
printers. This activates the Windows Add Printer 
wizard. NOTE: Most printer drivers are available via 
Windows; however, newer printers may require you 
to load the manufacturer-supplied print driver (must 
be on CD-ROM). Refer to the Basic Service Manual 
for more information. 
Table 16-21: Standard Printer 
Preset ParameterDescription
Print Full Screen Select this if you want the standard printer to print 
the full screen.
Enable Video Invert Select this is you want the standard printer to print 
black on white rather than white on black.
Enable Print Screen 
KeyIf you have a standard printer connected to the USB 
port on the system, you can use the print screen 
key to print to this printer.
    Add page 694 to Favourites
    image text
    Enable zoom 
    							Customizing Your System
16-34 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
System/About Preset Menu
The System/About screen lists information about the system 
software.
 Figure 16-18. System About Preset Menu 
Table 16-22: Software
Preset ParameterDescription
Software Version The current software version on this system.
Software Part 
NumberThe software part number.
Build View The software build view.
Build Date The software build date.
Table 16-23: System Image
Preset ParameterDescription
Image Part Number The image part number.
Image Date The image date.
Table 16-24: Patents
Preset ParameterDescription
Patents Lists system patents.
    Add page 695 to Favourites
    image text
    Enable zoom 
    							Imaging Presets
LOGIQ 5 Basic User Manual 16-35
Direction 2300002-100 Rev. 2
Imaging Presets
Overview
Imaging screens allow you to specify parameters for the 
following:
• B-Mode (B)
•  Color Flow Mode (CF)
•  Power Doppler Imaging (PDI)
• M-Mode (M)
•  Pulse Wave Mode (PW)
•  Continuous Wave Mode (CW) [LOGIQ 7 Only]
• Harmonics (HAR)
• General
    Add page 696 to Favourites
    image text
    Enable zoom 
    							Customizing Your System
16-36 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Changing imaging presets
To change imaging presets:
1.  On the Touch Panel, select Utility.
2.  On the Touch Panel, select Imaging. 
The system displays the Imaging screens. See the Imaging 
screens on the following pages.
3.  In the Preset list, select the exam.
4.  In the Probe list, select the probe.
5.  In the row across the top of the screen, select the mode.
The system displays two sets of parameters and settings. 
The left column lists all settings for the exam (for example, 
Abdomen). The right column lists settings that apply only to 
the exam and probe combination (for example, Abdomen 
and M7C). See Figure 16-19.
6.  To change a parameter, do one of the following:
•  Select the value from a list
•  Select one value from a choice of two or more buttons
•  Select or clear a check box
7.  After changing the parameters, to save the changes, select 
the Save button.
NOTE:  When you Save changes to imaging parameters, the system 
saves changes to all modes, not just the mode currently 
displayed.
NOTE:  If you have problems with imaging, you can return parameters 
back to the original settings. Select the exam, probe, and mode, 
and then select Reload Factory Defaults. The system returns the 
selected parameters to the original settings.
For information about the specific parameters, refer to Chapter 5 
Optimizing the Image.
    Add page 697 to Favourites
    image text
    Enable zoom 
    							Imaging Presets
LOGIQ 5 Basic User Manual 16-37
Direction 2300002-100 Rev. 2
LOGIQ 5 Imaging Presets
B-Mode
 Figure 16-19. B-Mode parameters
Color Flow Mode
 Figure 16-20. Color Flow parameters
    Add page 698 to Favourites
    image text
    Enable zoom 
    							Customizing Your System
16-38 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Power Doppler Imaging (PDI)
 Figure 16-21.  PDI parameters
M-Mode
 Figure 16-22. M-Mode parameters
    Add page 699 to Favourites
    image text
    Enable zoom 
    							Imaging Presets
LOGIQ 5 Basic User Manual 16-39
Direction 2300002-100 Rev. 2
Pulse Wave (PW)
 Figure 16-23. PW parameters
Continuous Wave (CW)
 Figure 16-24. CW parameters
    Add page 700 to Favourites
    image text
    Enable zoom 
    							Customizing Your System
16-40 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Harmonics
 Figure 16-25. Harmonics parameters
General
 Figure 16-26. General parameters
    All GE manuals Comments (1)

    Related Manuals for GE Logiq P5 User Manual