GE Logiq P5 User Manual
Have a look at the manual GE Logiq P5 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 GE manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
LOGIQ 5 Basic User Manual 15-1 Direction 2300002-100 Rev. 2 Chapter 15 Recording Images Describes how to record images.
Recording Images 15-2 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2 Connectivity Overview A typical workflow for connectivity might be as follows (this setup varies by each user setup): • Select the dataflow, worklist for example. • Start a new exam. Select the patient. • Perform the patient scan. • Store images as multi-frame CINE Loops and Raw DICOM data via the P1 button. • Store secondary capture for DICOM print via P2. • Store images to the color printer via P3. • Store images to the black and white printer via P4. • Check the DICOM Job Spooler via F4 to verify delivery. • End the exam. • Permanently store images via the Patient menu.
Connectivity LOGIQ 5 Basic User Manual 15-3 Direction 2300002-100 Rev. 2 Overview (continued) Dataflow combines archive, data, DICOM, and onboard records into one coherent workflow. Destination devices are configured and assigned to P1-P4 print buttons. You select the appropriate dataflow (Portable, etc.) according to your requirements. You manage the patient database (local, shared, or via a worklist broker). • DO NOT use the internal hard drive for long-term image storage. Daily backup is recommended. MOD or CD storage is recommended for image archive. NOTE: DICOM images are stored to MOD separately from patient data, which also needs to be backed up to a dedicated database-formatted MOD. • You need to set up a protocol for locating images stored to external storage media for easy recall • GE Medical Systems IS NOT responsible for lost data if you do not follow suggested back-up procedures. GE Medical systems WILL NOT aid in the recovery of lost data. Refer to the Customizing Your System chapter for instructions on seting up your system’s connectivity.
Recording Images 15-4 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2 Adding Devices To add a destination device (printer, worklist server, etc.) to this system, see Chapter 16. To verify a DICOM device, see Chapter 16. Adding a Dataflow To add a new dataflow to this system, see Chapter 16. Adding Devices to a Print Button To add devices/dataflows to a print button (P1 through P4), see Chapter 16. Formatting Removable Media To format removable media, see Chapter 16. Using the DICOM Spooler To monitor/control DICOM jobs, press F4. You can view, resend, redirect, and delete images from the DICOM spooler by selecting a job, then specifying the action to be performed on this job. Troubleshooting using Views To troubleshoot connectivity on this system, see Chapter 16. To verify that a service is connected to the network, see Chapter 16.
Connectivity LOGIQ 5 Basic User Manual 15-5 Direction 2300002-100 Rev. 2 Portable Exams Using the DICOM Worklist Broker Here are the steps to follow when doing a portable exam: 1. Set up a dataflow called ‘Portable Exam’. The DICOM Worklist must be set up as the primary input device. DICOM Image Store must be set up as the primary output. Figure 15-1. Portable Exam with Worklist Dataflow Setup Example
Recording Images 15-6 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2 Portable Exams Using the DICOM Worklist Broker (continued) 2. Define a print key for DICOM print. Figure 15-2. DICOM Print Setup Example
Connectivity LOGIQ 5 Basic User Manual 15-7 Direction 2300002-100 Rev. 2 Portable Exams Using the DICOM Worklist Broker (continued) 3. Login. Figure 15-3. Login Pop-up Menu 4. On the Patient menu, select Portable with Worklist as this exam’s Dataflow. Figure 15-4. Selecting the Portable Exam Dataflow on the New Patient Menu
Recording Images 15-8 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2 Portable Exams Using the DICOM Worklist Broker (continued) 5. Select the portable exam patient. Figure 15-5. Selecting the Portable Exam Patient on the New Patient Menu 6. Select the appropriate choice in the Warning message. Figure 15-6. New Patient Query
Connectivity LOGIQ 5 Basic User Manual 15-9 Direction 2300002-100 Rev. 2 Portable Exams Using the DICOM Worklist Broker (continued) 7. Press On/Off. Answer ‘Shutdown’ to the System - Exit pop- up message. Figure 15-7. System Power Down Menu 8. Transport the system according to user manual instructions to the portable exam site.
Recording Images 15-10 LOGIQ 5 Basic User Manual Direction 2300002-100 Rev. 2 Portable Exams Using the DICOM Worklist Broker (continued) 9. Press Standby (On/Off) to power on the system. The patient’s exam is displayed on the screen. Figure 15-8. Patient’s Exam 10. Answer ‘Cont./End Exam’ to the Question pop-up message. Figure 15-9. Continue Current Exam Question Pop-up Menu